My 2012 R32 Project

The polycarbonate sheets, weld in seat mounting kit, swirl pot, braided fuel lines and fittings and all my gauges arrived on Wednesday :D

http://img835.imageshack.us/img835/1017/imag0378k.jpg

Just waiting on alloy rad to arrive, modify screamer pipe and get the gasket made up for the turbo-elbow then its cage, paint and map! So nearly all sorted under here :afro:

http://img198.imageshack.us/img198/8009/imag0377u.jpg

how much and where you get the sheets of polycarbonate

Quote:

---

Originally Posted by damo86

how much and where you get the sheets of polycarbonate

---

Think it was

http://www.grp4fabrications.com/prod...roducts_id=759 in Galway

cheers dude

Quote:

---

Originally Posted by damo86

how much and where you get the sheets of polycarbonate

---

Quote:

---

Originally Posted by si_berry

Think it was

http://www.grp4fabrications.com/prod...roducts_id=759 in Galway

---

Yeah it was grp4 man. Think it was 111 euro for a sheet 2 and half meter by 1 and half meter, you can also get tinted sheets too if you want

Small update....made up these mounts today for all my gauges

http://img194.imageshack.us/img194/7719/imag0442d.jpg

tacked in place checking line of sight

http://img215.imageshack.us/img215/1967/imag0443j.jpg

Welded it up then on the back of the bracket. I took a close up of my weld (my 3rd time ever using a welder so think its not too bad)
http://img839.imageshack.us/img839/2251/imag0444b.jpg

This was my second attempt at welding, bit snotty ha. Exhaust had corroded and snapped at the box on a punto
http://img19.imageshack.us/img19/2931/imag0435x.jpg

Finished piece, for water temp, oil temp and oil pressure
http://img845.imageshack.us/img845/4299/imag0445t.jpg

Then made this for the boost gauge
http://img43.imageshack.us/img43/8679/imag0446y.jpg
http://img62.imageshack.us/img62/1686/imag0447a.jpg

Few more bits arrived that I has been waiting on

Front camber arms, bosch 044 inline pump, blitz 1.3 bar rad cap
http://img209.imageshack.us/img209/8865/imag0411o.jpg

52mm aluminium rad
http://img267.imageshack.us/img267/3774/imag0419s.jpg

Ultralite 25mm spacers
http://img808.imageshack.us/img808/8936/imag0426i.jpg

HKS EVC 5 Boost controller
http://img207.imageshack.us/img207/4295/imag0430.jpg

New release bearing and sleeve from Nissan needed to fit new clutch
http://img256.imageshack.us/img256/8671/imag0432z.jpg

Water temp and oil temp and pressure senders
http://img853.imageshack.us/img853/4200/imag0434g.jpg

I converted my pool table into a workbench :cool:
http://img29.imageshack.us/img29/4772/imag0412g.jpg

And so I finished of stripping and tidying up the dash and interior loom and this is what i'm left with
Dash
http://img812.imageshack.us/img812/7627/imag0414n.jpg

Interior
http://img267.imageshack.us/img267/1343/imag0415j.jpg

Lets hope it starts :eek: lol

Great progress mate, coming along nicely now...

Savage man this is great progress and loadz of bits for the car, must be courier at your house everyday :) glad to see the build is really going places for ya now mate keep her lit!!!