http://i425.photobucket.com/albums/p...n/PIC_0201.jpg
greddy oil cooler and relocation kit
http://i425.photobucket.com/albums/p...n/PIC_0202.jpg
Printable View
http://i425.photobucket.com/albums/p...n/PIC_0201.jpg
greddy oil cooler and relocation kit
http://i425.photobucket.com/albums/p...n/PIC_0202.jpg
pressure testing the intercooler
http://i425.photobucket.com/albums/p...sson/noel7.jpg
removed the EGR
http://i425.photobucket.com/albums/p...n/PIC_0244.jpg
http://i425.photobucket.com/albums/p...n/PIC_0248.jpg
removed the charcoal canister
http://i425.photobucket.com/albums/p...n/PIC_0247.jpg
tein tie rod and end beside a stock one
http://i425.photobucket.com/albums/p...sson/noel4.jpg
hks down pipe beside the stock pipe
http://i425.photobucket.com/albums/p...n/PIC_0233.jpg
http://i425.photobucket.com/albums/p...n/PIC_0234.jpg
http://i425.photobucket.com/albums/p...n/PIC_0235.jpg
fuel pressure regulator installed
http://i425.photobucket.com/albums/p...n/PIC_0345.jpg
http://i425.photobucket.com/albums/p...n/PIC_0360.jpg
so i then moved on to making a dash piece to hold all my electrical goodies.
started with this
http://i425.photobucket.com/albums/p...n/PIC_0379.jpg
which then turned into
http://i425.photobucket.com/albums/p...n/PIC_0382.jpg
and then with the gadgets installed it looks like this
http://i425.photobucket.com/albums/p...n/PIC_0385.jpg
im pretty happy with how it turned out, so much so that i took a video clip of it all beepin and flashing and what not, and as soon as i work out how to post it i will
http://i425.photobucket.com/albums/p...n/PIC_0390.jpg
see if this works
YouTube - thegosson 180sx drift dash
the engine bay before
http://file041a.bebo.com/5/large/200...202662862l.jpg
and after
YouTube - thegosson 180sx drift engine bay
and a few pics while i had her out running in the new diff
http://i425.photobucket.com/albums/p...n/PIC_0406.jpg
http://i425.photobucket.com/albums/p...n/PIC_0402.jpg
http://i425.photobucket.com/albums/p...n/PIC_0413.jpg
http://i425.photobucket.com/albums/p...n/PIC_0417.jpg
ok so was up at track day performance (tdp.ie) all day today and got my geometery and suspension setup. its set to
2 1/2 neg camber on front
1 neg camber on the rear
slight toe out on both front and rear.
also got my hks evc plumbed in and set up, and got the power fc installed and mapped. so then it was time to hit the dynapack.
yellow is before the map and green is after mapping
oh and this is still with the standard turbo.
@ the hubs
http://i425.photobucket.com/albums/p...9atthehubs.jpg
@ the fly wheel
http://i425.photobucket.com/albums/p...heflywheel.jpg
air fuel ratio
http://i425.photobucket.com/albums/p...rfuelratio.jpg
manifold pressure
http://i425.photobucket.com/albums/p...stpressure.jpg
awesome thread, awesome work and awesome car.
to you my good sir i tip my cap
good power for standard turbo!