also! nice air filter and afm! haha
Printable View
also! nice air filter and afm! haha
yessss i need to get that other one back off you cos ill havr to change the power steering feed and dont wanna mod it till i have the filter that will be staying for goodQuote:
Originally Posted by PeterT
Impressive, very impressive..............always wanted to bolt a Turbo onto something!! Or put like a Gt35R on my Audi :) Ha! Keep the pics coming mad man.......
haha do it!!!!!!Quote:
Originally Posted by Chuck_g
not many pics today as i forgot my cam this morn
did very little anyway!:D front mount on and pipe work finished, front bumper cut to shite looks cool!, det injectors are in, det ecu is in, auto box, ring gear and torque converter are in the scrap heap where they belong!!! light weigt fly wheel and exedy clutch are bolted up, clutch pedal- master and slave cylinders are in
left to do:
bolt rb bell houseing on to sr box, and put that in
fidle around with some shafts to get the right lenth:p prop u sickos:rolleyes:
put in a diff undecided atm prob just put in a viscus insted of welder
put in walbro:rolleyes: fuel pump ick
bleed valve and boost gauge
lower the shite out of it:cool:
most important drive the crap outa it!!!!
clutch and fly
http://i581.photobucket.com/albums/s...3/r32p2001.jpg
in!!
http://i581.photobucket.com/albums/s...3/r32p2002.jpg
rb bell houseing
http://i581.photobucket.com/albums/s...3/r32p2003.jpg
ah the clutch out of me owl laurel
shes comin on well gem,i shud be out there to ya later on
You're flyong alog with it Gem, fair play. :) I bet you can't wait to get it out and to start the weckage.
bit done today not a hole pile put box together them put it in then back out now in again!!! cunt of a yoke! prop is all done front section of a 180sx rear of a type m r32 gtst gear selector hole is all done and finished
sr20 box
http://i581.photobucket.com/albums/s...3/r32p3001.jpg
rb20 bellhouseing
http://i581.photobucket.com/albums/s...3/r32p3002.jpg
rb left sr right
http://i581.photobucket.com/albums/s...3/r32p3003.jpg
remove 5 12mm bolts here
http://i581.photobucket.com/albums/s...3/r32p3004.jpg
pull plate off
http://i581.photobucket.com/albums/s...3/r32p3006.jpg
looks like this
http://i581.photobucket.com/albums/s...3/r32p3007.jpg
remove clip around the outside of the bearing(not the circlip on the spigot shaft)
http://i581.photobucket.com/albums/s...3/r32p3008.jpg
then remove all the 12mm bolts around the middle of box
http://i581.photobucket.com/albums/s...3/r32p3009.jpg
few gental belts of a sledge hammer!! lol looks like this
http://i581.photobucket.com/albums/s...3/r32p3010.jpg
sr left rb right see the same exact patern
http://i581.photobucket.com/albums/s...3/r32p3011.jpg
sr speedo drive electric
http://i581.photobucket.com/albums/s...3/r32p3012.jpg
rb speedo drive cable
http://i581.photobucket.com/albums/s...3/r32p3013.jpg
just pull out the 10mm bolt then they just pull out
http://i581.photobucket.com/albums/s...3/r32p3014.jpg
bumper cutage!!!
http://i581.photobucket.com/albums/s...3/r32p3015.jpg
comin along now gem
its alive!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! drove it tonite all went very well exept i never bothered to change the fuel pump as i just wanted to drive it the stock na pump is not able for it!! and haveing a small prob keeping the boost down it will be grand thow
first start up
http://i581.photobucket.com/albums/s...h_r32p4003.jpg
jeez gem fair fucks to ya would love to have the mechanical knowledge to do some like that.... previous owner will be sick when they see it sliding around:)