Can you not just transfer your insurance over for the day? I presume it wont be taxed but if you say it is just back on the road that day I'd presume you'd be fine.Quote:
Originally Posted by AE86-20v
Printable View
Can you not just transfer your insurance over for the day? I presume it wont be taxed but if you say it is just back on the road that day I'd presume you'd be fine.Quote:
Originally Posted by AE86-20v
In the tin of beams? Work Equip 01's yea?Quote:
Originally Posted by Driftma
Uploading pics as I speak......
ye the bean should have works by this time next week,hurry on with the pic i've been waiting all day to see what ya got:eek:Quote:
Originally Posted by AE86-20v
Theres something wrong with the computer cant fucking use firefox so using chrome here and flashplayer keeps crashing and wont let me use my usual image hosting site tinypic so tried a different one and it wont let me resize the images hold on gonna do a reboot see will that do anything.
Whales
http://i41.tinypic.com/2dj9a3p.jpg
http://i40.tinypic.com/14bs4eo.jpg
Getting ready for some new rubbers!
http://i40.tinypic.com/2nvyqzt.jpg
Some new sticky Toyo R1R's up front
http://i44.tinypic.com/2h2dpmr.jpg
http://i40.tinypic.com/2iszaeq.jpg
Ready to rock!! Need to get the nuts for the spacers tomorro hopefully then gonna trial fit them
http://i39.tinypic.com/2utgrwy.jpg
Suspension
http://i42.tinypic.com/ofzp4w.jpg
http://i39.tinypic.com/24ot18k.jpg
Got 2 sets of coilys in case I break one
http://i43.tinypic.com/oivyfs.jpg
Just kidding the other set is for the cousing lol!!!!!!!
those wheels look the job, Where did you get the r1r's out of and how much?
I work as a tyre wholesaler cant be giving out trade secrets now can I!! All I can say even tho were in the trade these were fucking expensive!! Still cheaper than camskill but not by a whole lot. The T1R's are a different story can get them fairly right. Could have got r888 for around the same price but I want to drive the cam on the road as well and R1R's were the best all rounder r888 are a bit hairy in the wet!!Quote:
Originally Posted by Driftma
cool,it'd be interesting to see how they'd fair out against the t1r. have you ever used t1r's before?Whats the r1r's thread wear no.?Quote:
Originally Posted by AE86-20v
T1R's are in a completely different league to these (lower one obviously) T1R's are excellent value but not up there with Goodyear F1's or RE050's. They got a name a few years back and became the brand whore's choice of tyre there been used less and less now BUT the R1R's and R888's are unreal just a pity there so frigging dear!! The R1R's are semi-slick the T1R's are not.Quote:
Originally Posted by Driftma
T1R = Great budget tyre for everyday driving
R1R = Excellent wet/dry tyre to be used at the odd trackday
R888 = Grippy mother fucker in the dry scary mother fucker in the wet really should only be used as a track tyre only although they will pass the NCT so...??
i'm looking for some thing good and gripy for the front of the beans,thats why i'm asking all these questions. could you pm me a rough price on two of those r1r's?Quote:
Originally Posted by AE86-20v
them wheels have serious lookin offset:D
It will be Tuesday now cause of the bank holiday. I dont have them in stock. Had to order them 2 for meself that was a month or 2 ago but if I dont pm ya Tuesday PM me cause ive a head like a sibh.Quote:
Originally Posted by Driftma
15x8 0+/- offset is the best size I could get them in so thats what I went for. Have spacers for it too so should make it that bit more interesting.Quote:
Originally Posted by way2fastforu
Just read through full thread, nice build, looking forward to seein pics of these wheels on, was only looking at them the last day, did you with gold or bronze, hard to tell from pics...?
There Gold.Quote:
Originally Posted by mini-e
god they do look like a serious offset, cant wait to see them on the car.....
Got the 2 sets of coilovers fitted today (me and the cousins) and trial fitted the wheels on his cam, There fair mental looking in person the pic dont do it any justice these pics are without spacers.
http://i41.tinypic.com/wvpxyw.jpg
http://i40.tinypic.com/2m6veh5.jpg
Also anyone thinking of a new set of coilovers and are on a budget the BC's are well worth it. I couldnt drive mine on the road because its not insured but the cousins was sound not to hard on the road but not too soft either just right!! 30 way adjustment on them too.. Michael in Barry's Motorsport is who I got mine off, Sound lad and easy to deal with.
Without spacers :eek:
Looks deadly :)
looks goood cant wait till she done:)
Stancing!
http://i41.tinypic.com/bg2vpu.jpg
http://i40.tinypic.com/28mfda9.jpg
No stancing (poor offset longchamps)
http://i41.tinypic.com/swy5o3.jpg
I deffo need to fit the skirts and spats with 15's it sits to high off the ground.
http://i44.tinypic.com/fdsvmb.jpg
they look mad lookin lad ..
sum diffrence ;)
have you spacers on them?
You definetly need to roll the arches before you spray them!Quote:
Originally Posted by AE86-20v
they'd be sweet in the colour of Buddyclub P1 Originals.. a greyish chamaingne colour..Thats if your keeping the car red over black..?
Yea 20mm front 25mm rears.Quote:
Originally Posted by Simon
@Tekno
The arches gonna be rolled front and back before spraying. Have you pics of yours after you done it? Also do you still have that arch roller? Also im going all Black.
Mmmmmmmmmmm.. Carbonnnnn
http://i43.tinypic.com/1zq6o0l.jpg
MMMMmmmmm more carbon!!!!
http://i41.tinypic.com/167p7xc.jpg
Current Spec.
Engine:
T3 Trumpets
OMEX 600 Series ECU
Fujitsubo Manifold
Bosch Coilpacks
A/M Plugs
Carbon Plug Cover
Carbon Timing Cover
RS Chita Waterline Kit
Walbro Fuel Pump 255LPH
Mishimoto Rad
De-Cat
Suspension + Wheels:
New BC Coilovers W/Camber plates
NRCA's
Cusco Panhard Rod
25mm Spacers on rear
XXR 552's 15x8 0+/- Offset
Fully Polybushed
Exterior
87 Bumper W/ 84 Lip
J-Blood Skirts
J-Blood Spats
TRD Spoiler
Redline Lights
Carbon Bonnet
Interior:
Defi Style Gauges
Hydro Handbrake to be fitted
Sparco EVO Seats to be fitted.
Drivetrain:
TRD 4:77 CWP
Exedy Paddle Clutch
TODA 212mm Lightweight Flywheel
TRD 2 Way (new kaaz spare)
Brakes:
Greenstuff pads + Discs
Goodridge Braided Lines
The wheels are looking wicked
Nom, nom, nom ^^^
Think im gonna slightly change my plan and do something similar as above as I have the wheels and my car is already red so....
That car looks wicked mate !!!
car look savage keep up the gud work:p
Fibreglass bootlid + TRD spoiler moulded in all in one job ordered today. Once this comes, Ive to do 2 front wheel bearings then its going for paint. A quick trip up to Martin to have her running sweet and I can be finally back on the road after nearly a 2 year wait yipee (back to annoy Greg in the soup haha). Should have it back well before xmas fingers crossed. Also thinking of changing wheels again. :(
Same as this:
http://i32.photobucket.com/albums/d3...m/DSC00405.jpg
Savage dude, well ware :)
Thanks, I'm afraid I'm not gonna like it after paint, I'm terrible, constatly changing my mind. I wanted all black, now I'm going red with black bumpers but still the red along the top of the bumpers. If the wheels dont suit was thinking of getting the same as Darren Mc's 13" compomotive's in the same specs? I think that colour scheme might work better, sitting on its arse with mild rear arches sumtin like EBN or Runfree (not full over fenders not to gone on them)? :confused::confused::confused:Quote:
Originally Posted by Kruizer
Great stuff! Yeah it hink youd be right to sell on the wheels you bought the car is gonna be sweet as but i think those wheels will let it down tbh and i think you know it too!Quote:
Originally Posted by AE86-20v
Make the plungge for awesomeness and just be broke for a few weeks.Its well worth it!
Just had mine out the road i freakin love the 20v! rips up compared to the 16v!
Skip back a page for what it may look like was trying to be a bit different with the wheels as never seen them before (may still work I dunno have a few pics here i'll dig them out), What ya think of the comp idea?Quote:
Originally Posted by Tekno Twinky
http://i73.photobucket.com/albums/i2...ch2010004s.jpg
http://i73.photobucket.com/albums/i2...ch2010001s.jpg
http://i463.photobucket.com/albums/q...e86xxr522s.jpg
Quote:
Originally Posted by AE86-20v
Comps would be awesome too which type? PDdans watanabe style or the MCNsport "N2" style?
The ones on the "N2" would be awesome in a 14 or 15 x 9 -28 or so all round!
Yeah man all the money youv spent itd be a shame to sit it on those wheels i think.None of the car there are doin it for me personaly.
What about this guy jay hes got em on ebay in 14 and 15
http://cgi.ebay.com/ebaymotors/RS-WA...s#ht_816wt_841
Go the Danstoy AE86 Colour Scheme with those wheels...
I think 15's be a bit of overkill on my little 165bhp thats part of the reason I might put mine up for sale but i'll what its like once its on the road. CXR's are the ones I'm talking aboutQuote:
Originally Posted by Tekno Twinky
http://i74.photobucket.com/albums/i2...otiveCXR-3.jpg
I would absolutely love a set of wats but I always back out of paying huge money for wheels I just cant bring myself to pay €1500 for them (im still waiting for that one person who dosnt know what there selling to snap up a bargain lol I missed a few times!! you've got to be quick on 86irl). A set of comps in 13x10 like this with 13x8 fronts works out about 700odd (I know there not comps in the pic but same spec's)
13x10's
http://i647.photobucket.com/albums/u...march07041.jpg