Ye after you ve burnt the rubber out just get a hacksaw open the blade and slide through the sleeve and cut a notch it then it ll knock out handy enough with a small chisel or flat head screw driver
Printable View
Ye after you ve burnt the rubber out just get a hacksaw open the blade and slide through the sleeve and cut a notch it then it ll knock out handy enough with a small chisel or flat head screw driver
Not all the DW bushes require the original collars to be removed, so double check first. There's a few good guides on the sxoc forum.
I used a gas torch anyway and I thought it made a good job of burning them.
do you know which do and do not? im doing all the link arms in the back end
used burnin gear before but stinks d garage out dude, fookin rank:( use a press,, its d right job;)
Definitely front lower control arms don't need them removed, I know cos I just did them the other day.Quote:
Originally Posted by pigeon316
I'm not 100% about the back though, I used rose jointed arms mostly and I haven't fitted poly bushes to the rest yet.
Do a search on sxoc.com, there's loads of step by step guides with pics that I found useful.
its only the front lower arm bush collars that dont need to be removed
all the collars on the back need to be takin out tho!