Slowly but surely.....
Printable View
got the last of my replacement exhaust gaskets there the other day, manifold gasket was 42euro from nissan and decat gasket was 8euro off ebay
at fermoy i picked up the last of the bits needed to get my cars suspension set up off gem at a great price
http://i51.tinypic.com/jkc8kj.jpg
Tein inner and outer steering arms already fitted with spacer so should improve lock a bit
http://i51.tinypic.com/1198rc0.jpg
had no work today so went to cavan to do a few bits on the car, got more done than expected. I was weary bout doing rear subframe myself as i haven a clue bout mechanics but got stuck in.. took 5hrs but i was alone and hadn a clue wat i was at...
just lifted car with trucks tail lift to get height on the axle stands for more room to work
http://i55.tinypic.com/m9xgjp.jpg
i previously asked how to remove the subframe and few lads mentioned havin to use a 32 socket on hubs but the way i done it was
remove exhaust from cat back, remove coilovers,remove arb, remove calipers and tie them up outta the way, undo diff from prop shaft, undo half shafts, drop the diff, undo the 4 nuts holding frame up and drop frame, then remove all arms and transfer hubs still attached to wishbones half shafts etc to the new sub frame
WILL THAT BE OK???
the 2 frames side by side
http://i53.tinypic.com/mm5zpu.jpg
and all stuff transfered waitin to go back in
http://i53.tinypic.com/2f0ai2p.jpg
also picked up these bomex mirrors off gemat the wknd just blew over one with a coat of black spray to see how they'd look will do properly soon, i like them anyways
http://i54.tinypic.com/161hv90.jpg
http://i52.tinypic.com/2qly160.jpg
Good stuff ouuta you ste... Fair play for gettin stuck into the work yourself... If i done the same id save myself hundreds.. ps... The Advans are horrible.... I think you should sell them to me... :p:p:p Ha. Only messin.. If you ever decide to sell them let me know.... Keep up the good work
thanks man and your only the 10th person that wants advans lol
nice work ( selling the transit no?) lol
ah shes a uk iveco 75e15 mate ha ha
ah right lol
just reading throught the thread there backways as usual lol, did the floor paint stand up to much abuse yet? or do you expect it too? just curious
its ok i suppose only laid down 2 coats of lacquer so gets marked a bit but sure your bound to get that ya no
well got some new clobber today, picked up the lid myself off drift2motorsport and the missus got me the boots and gloves for my birthday tomorrow...
all i need now is practise practise practise
http://i51.tinypic.com/1pebu9.jpg
Some woman my brenda all the same!