Diarmuid's 180sx project :)

Printable View

Show 40 post(s) from this thread on one page

18-11-15, 19:47
DSlide93

Quote:

Originally Posted by rob_180sx

Ah cool you already have the boost controller! Your shopping list is pretty close to being sorted so :)
I think the fpr is a good idea as its not too expensive, maybe not entirely necessary but for the sake of €150. Best speak with who your getting to map it to see what spec the recommend going with to suit the ecu/turbo setup.

Also just for reference, heres the dyno graph i had from wcp
http://33.media.tumblr.com/tumblr_m6cdflSCb41r92zkk.jpg

Sweet man, nice climb with just a turbo and actuator upgrade :)
Yeah so after further talks with Stiv at MDT who will be mapping the car and supplying the nistune ecu, he has recommended a Garrett GT2860r turbo to go with my mods and said an fpr isn't necessary:)
18-11-15, 21:49
Ray09

Quote:

Originally Posted by DSlide93

Sounds good man, was chatting Stiv at MDT who will be mapping it and he has recommended a Garrett GT28060r :) he said with all the other supporting mods it should make 360/370bhp no problems at all. :)
Waiting until 4300 for full whack I couldn't deal with after mapping and spending money on it, but thats my opinion.

http://i737.photobucket.com/albums/x...psw44msow9.jpg

Thats the print out for mine anyway, thinkin of adding cams over christmas to get a bit more at the top end. What boost are you going to be running?
18-11-15, 23:28
DSlide93

Quote:

Originally Posted by Ray09

http://i737.photobucket.com/albums/x...psw44msow9.jpg

Thats the print out for mine anyway, thinkin of adding cams over christmas to get a bit more at the top end. What boost are you going to be running?

Probably 1.2/1.3bar, not too sure to be honest man
05-12-15, 20:34
derek89

I'd say excitement is an understatement now. Some nice goodies alright
05-12-15, 21:32
lukeb

Nice one man!
06-12-15, 04:20
DSlide93

Quote:

Originally Posted by derek89

I'd say excitement is an understatement now. Some nice goodies alright

Yeah looking forward to getting it all done now :)
06-12-15, 04:20
DSlide93

Quote:

Originally Posted by lukeb

Nice one man!

Cheers pal :)
08-02-16, 12:27
rob_180sx

Tis coming along nicely man! :)
08-02-16, 13:09
DSlide93

Quote:

Originally Posted by rob_180sx

Tis coming along nicely man! :)

Getting there now, looking forward to having it back and getting it mapped :)
02-04-16, 10:39
derek89

Your a bad man ha ha. Thing is going to be mental. What turbo is on it??

Show 40 post(s) from this thread on one page