r32 road car project

so here we go with a heavy project tread!
where do I start��

well Christmas 2015 after searching for a s14 for ages and finding noting but rust a friend offered me his r32 he had recently bought from another friend.
after viewing car I decided it was no longer an s14 I wanted��
the history of the car as far as I no is imported around 2006
http://i840.photobucket.com/albums/z...pstaaymsnv.png
http://i840.photobucket.com/albums/z...sj5usv9ki.jpeg
was used as a road car for a short time before being used for a bit of drifting!
http://i840.photobucket.com/albums/z...psezjxyb3d.jpg

a friend of a friend then bought the car in 2010 and done 3 or so track days on it and was on storage the for most of its days!
my friend Ian then bought it and in the short time he had it he had put an interiour back.
http://i840.photobucket.com/albums/z...pspnwsvxdh.jpg
http://i840.photobucket.com/albums/z...pszibts4k1.jpg

http://i840.photobucket.com/albums/z...s7y9rkg5b.jpeg
http://i840.photobucket.com/albums/z...srhljihh0.jpeg

he also added a Sparco fixed back seat and after some driving and clutch kicking i found out that it was not for me�� it was to tight and any time I clutch kicked I taught the seat was going to bust��
I then replaced that with a bride brix which came out of a friends twin cam.
http://i840.photobucket.com/albums/z...pscvupxwmo.jpg
few pics of what it looked like when I bought it.

http://i840.photobucket.com/albums/z...shx4s2m3n.jpeg
http://i840.photobucket.com/albums/z...su7sqvegz.jpeg

since iv bought the car it's been sat in the shed for most of the time bar one or two spins and very little work due to being busy in work.
the spec on car when I bought it was:
tein coilovers
drift works front and rear camber arms
driftworks hicas lock out kit
hicas removed from front to rear and looped
new act clutch
cusco dash dodger with added bolt on door bars
Nissan optional strut braces front and rear
spit fire coils
Hks ssqv bov
Apexi induction kit
Japspeed fmic
Japspeed stainless elbow
Japspeed stainless downpipe
Japspeed stainless Decat
Japspeed stainless cat back
extra lock
welded 4:1 diff
red stuff pads all round
genuine suede omp steering wheel
s14 lower arms
greddy boost gauge
Extra temp gauge
thrust weighted gear knob
and wheels are marked ssr hasemi speed star(can't find em on google)

since I bought it iv added:
carbon dmax roof spoiler
carbon dmax boot spoiler(bought from reuben dover)
set of ssr vienne courages(bought from Derek Newsome)
bride brix driver seat
a gtr style bumper with nismo lip(cut gtst one bought from darran moynihan)
amber corners
few pics of the above bits fitted.
http://i840.photobucket.com/albums/z...psgg3jlso7.jpg

http://i840.photobucket.com/albums/z...ps8p0vk7gv.jpg

http://i840.photobucket.com/albums/z...psri0ub8o5.jpg

http://i840.photobucket.com/albums/z...pshbvfv8rw.jpg
http://i840.photobucket.com/albums/z...pscvupxwmo.jpg
http://i840.photobucket.com/albums/z...pskbyah9vn.jpg
http://i840.photobucket.com/albums/z...ps8zilrm0e.jpg
http://i840.photobucket.com/albums/z...sytcuohxp.jpeg
http://i840.photobucket.com/albums/z...symny5qvg.jpeg
http://i840.photobucket.com/albums/z...swm3koics.jpeg
back needs to be spaced more!
http://i840.photobucket.com/albums/z...sjwedplfx.jpeg
front archs will need rolling when I get new wings or differnt size tyres!

http://i840.photobucket.com/albums/z...stwrru2dt.jpeg
this is where she spends most of here life ��
http://i840.photobucket.com/albums/z...psgyr2telw.jpg
http://i840.photobucket.com/albums/z...pspvgrjpgs.jpg
I love the blacked out look with the tints��
http://i840.photobucket.com/albums/z...psubv40qan.jpg
the interior needs lots of tidying up but this is the general idea!the gauge in center of dash has to go and vents to be fitted back!
http://i840.photobucket.com/albums/z...psqjhh3wku.png

my self and a friend washed the 32 and his altezza the weekend!
http://i840.photobucket.com/albums/z...psfxklnpiv.jpg

http://i840.photobucket.com/albums/z...psfmqffmx6.png

http://i840.photobucket.com/albums/z...psmu1mib0q.jpg

the plans for the car are:
get it nct very soon
get it kitted(bn sports is idea)
get it lower and wider
get full respray
rebuild glove box unit and wire in all gauges
remove temp gauge from dash and fit vents
fit radio right
get genuine gtr bonnet
fit decent sound system
get passenger bride seat
get Takata harness x2
get gtr grill
get non projector headlights(black houseing)
pad the cage
re do tints all round after nct
after that I want to get car out in road and track and enjoy it for a while before I go and do engine work and either widen wheels I have or buy bigger!

this is how I want the car to look!
http://i840.photobucket.com/albums/z...psontbuyt0.jpg

that's all for now! il keep updating as I go! happy reading!