Major SR20 Performance parts Clearout
**When I copied & pasted, I realised prices were in GBP, will adjust Euro prices at a more reasonable hour tomorrow! for anyone interested in prices sooner, reply and I will post it for you ;) **
Major SR20 Engine Performance clear out!! I may add bits as I remember them so be sure to check back regularly.
Prices are guide, feel free to make a reasonable offer on items.
VVT cylinder head, standard, had light skim and clean and is ready to be built - Ports all still standard size.
http://i13.photobucket.com/albums/a2...psw18rjiuw.jpg
http://i13.photobucket.com/albums/a2...ps3ski5c98.jpg
*New* Supertech full head kit, including valves, dual springs, Inconel exhaust valves, valve Guides, valve seals - Literally everything to build a complete aftermarket/stronger head from scratch.
http://i13.photobucket.com/albums/a2...psasxfudez.jpg
http://i13.photobucket.com/albums/a2...ps7babt9ms.jpg
*New* Supertech Vales(exhaust Inconel) & dual springs
Can do a deal with head and Supertech items sold together. Supertech items are standard sized.
*New* 1mm Metal head gasket (I forget the brand but a recognised one!)
HKS 264 cams with adjustable pulleys
Tomei rocker stopper
Chrome VVT Cam cover
SR20 VVT block - Just machined to .5mm oversized. Has new Supertech pistons to suit or can sell separately. Ready to rebuild.
Block & Pistons
Pistons are standard crank size but 86.5mm oversized
http://i13.photobucket.com/albums/a2...psec4erpun.jpg
Standard sr20 crank in working condition, was taken from good engine
http://i13.photobucket.com/albums/a2...psbulkgqv5.jpg
ZRP Stroker crank, has been machined after "very" minor scoring on the mains & polished comes with brand new ACL & King bearings (Mains & big ends)
http://i13.photobucket.com/albums/a2...psym062skt.jpg
ZRP connecting rods with matching ARP bolts
ARP Bolts: Head & Mains € for both (Used once)
Wiseco pistons (stroker) I only have 3 of these, I'm certain you can buy individually direct from Wiseco to get the fourth!
West Coast Performance top mount manifold with T3 flange for turbo, V-band for external wastegate & V-Band for screamer pipe. This is NOT cheap shit! It is also heat wrapped.
Down pipe with flexi to suit the above
http://i13.photobucket.com/albums/a2...psohuj6ysc.jpg
Sard 850cc Injectors on standard fuel rail
Power FC D-Jetro with all wiring, connections, Hand commander - This PFC is for the S14 wire loom but also comes with the harness to fit the S15 loom - This is a rare harness and saves a lot of hassle swapping wiring around! with harness.
Harness Info: http://www.apexi-usa.com/store/elect...r-harness.html
http://i13.photobucket.com/albums/a2...psdvb7nwch.jpg
http://i13.photobucket.com/albums/a2...pshiir7oxp.jpg
http://i13.photobucket.com/albums/a2...ps5e68587f.jpg
SR20 to RB25 adaptor plate with fitting bolts
Vibratechnics Rb25 gearbox to S14 chassis solid mount
RB25 short shifter
GR fuel pump
Bosch 044 Fuel pump
*New* TAKATA GENUINE harness 1x4point & 1x6point Non Hans
Prices are open to negotiation especially if parts coincide together in packages. Shipping is available Worldwide. and for bulkier items I can arrange to get to Autosport, Birmingham in January with me.
All parts above were to be used to freshly rebuild my engine.
With the same items above I was running 475bhp reliably for 2.5 years alongside an Owens GTX3073HTA turbo which may also be for sale soon... Only clearing out due to a change in circumstances and no longer needed.
http://i13.photobucket.com/albums/a2...psm4hqgf1q.jpg
Wings, arches and front wings are also for sale separately or together as a package.
Photo's to follow, let me know what your interested in ;) :thumbs:
