Southern style s13 build

not a huge project but thought id keep you up to date with my current 13.

after spending the last couple years constantly buying shit i cant afford, then running out of cash and having to break it, i thought id go back to the beggining and just make a basic spec s13 for pissing about in.

picked it up couple weeks ago, wasnt much to look at but had most of the important bits, all bushes done, hsd coilovers and a rebuilt ca18 by a reputable company, not just in a shed.

looked like this:

http://img823.imageshack.us/img823/8...0320101611.jpg

came from the sxoc, so was very well looked after but not quite to my taste.

so first things, fitted a preface splitter,got hold of some rota grids and spacers, bolted them on and stuck it on its arse:

http://img854.imageshack.us/img854/2...0520112580.jpg

however looking at it, the facelift bumper with preface splitter just sat too low, as i live in one bumpy ass area, and lets face it 99 percent of people just think your bellend if your scraping down the road. so swapped it for a preface front bumper and splitter:

http://img853.imageshack.us/img853/1...0520112595.jpg

still plenty low, but just that little bit of difference. as it goes doesnt catch on much at all now.

then fitted grids to the rear and dropped it down to height, with the help of the fatman we rolled the arches out with a bar to good standard:

http://img713.imageshack.us/img713/1...0520112621.jpg

also fitted my old bootlid with wangan and roof lip spoiler, some skirts and threw some lexus lights on after tinting them red and painting the centre panel black:

http://img819.imageshack.us/img819/3...0520112629.jpg

then fitted washer spacers, tein rods and ends and driftworks tension rods for a bit more lock, as you can see, a lot more lock for literaly pennies, why people are spending thousands for only a tiny bit more than this, i still dont get!:

http://img97.imageshack.us/img97/4449/280520112590.jpg

bought a 180 rear bumper, spats and centre piece, which is yet to arrive so in the meantime pinched dans 180 rear bumper, and fitted some kouki rear lights i bought:

http://img641.imageshack.us/img641/422/030620112631.jpg

then spent the evening trimming the standard interior panels in bride fabric:

http://img807.imageshack.us/img807/7...0520112596.jpg

fitted them, a bride drivers bucket, white steering wheel, gknob, trs harnesses, full set of greddy gauges, white clocks, aristo floor mats, snap off hub, touch screen headunit and even a sub in the boot! (maybe a bit chav, but i like my music, and the rest of the car is running full interior):

http://img14.imageshack.us/img14/9773/060620112646.jpg

also have a mint recaro for pass side but waiting on subframe to arrive, as well as a 180sx rear bench:

http://img853.imageshack.us/img853/7...0120072369.jpg

http://img689.imageshack.us/img689/1...sxseatset5.jpg


spec list:
ca18, full rebuild with everything replaced
t28 turbo
FMIC located behind slam panel for max protection!
52mm aluminum rad with fans
aftermarket exhaust
Apexi air filter and metal pipework
uprated FORGE 1Bar actuator
1 grade colder NGK iridium spark plugs
Apex uprated engine and gearbox mounts
Norris designs ecu

Footwork:
HSD coilovers
adjustable camber arms
adjustable toe arms
adjustable traction arms
Tein steering rods and ends
Driftworks washer spacers
rear strut brace
polybushed all round
welded 3.9 diff
s14 front calipers and discs
red stuff rear pads
braided lines

Interior
aftermarket wheel
snap off hub
aftermarket shifter
GReddy boost gauge
GReddy oil temp gauge
GReddy oil press gauge
GReddy water temp gauge
Greddy triple gauge holder
Bride drivers seat on super low rail
Recaro passenger recliner
TRS harness
spin turn brake button and grip tape
touch screen dvd headunit, 6x9s front, fusion sub and amp rear

exterior:
Rota grid drifts 16x8 et10, new 205/45 federal 595 upfront, whatevers knocking about on the rear
25mm H+R spacers all round
aftermarket sideskirts
preface front bumper
180 rear bumper, spats and centre
180 kouki rear lights
wangan ducktail spoiler
roof spoiler
rolled arches

then took it for its first outing to essex arena, it drove pretty good, though clutch slipping a bit when the track dried out so thats going to have to be done. few pics:

http://img263.imageshack.us/img263/5958/dsc2489b.jpg

http://img690.imageshack.us/img690/5...2385210468.jpg

http://img42.imageshack.us/img42/196...2385445468.jpg

managed to rub the wall a few times, pretty happy with:

http://img846.imageshack.us/img846/8...0620112638.jpg

got through to the top 8, though stupidly spun at the end of the lap, nevermind!

however rather unfortunatly during qualifying a little isuzi piazza thing spun in front of me, my fault i guess for being too close but had nowhere to go but into the side of it. fucking thing didnt have a scratch on it, s13 on the otherhand door and rear quarter went in like cheese!:

http://img807.imageshack.us/img807/8...0620112636.jpg

not going to cry about it, its a drift car and i drive it like a flange, it will no doubt get more of the same.

so today took off fucked door and replaced with a new one:

http://img863.imageshack.us/img863/7...0620112644.jpg

luckily the sill looks straight enough

http://img819.imageshack.us/img819/5...0620112645.jpg

rear quarter, not sure best was of getting dent out, someone suggested a plumbers air bag down the side might straighten it out, if not just have to hammer it out.

so thats where i at for now

future plans:
alignment as is currently setup for grip
wind deflectors
gandor mirrors
fit rear spats and centre piece
fit recaro passenger and 180 rear seats
fit dash dodger cage (as its a daily and dont want anything thatll hinder getting in and out
new clutch
get dan to modifying the exhaust as the rear section is too low and despite raising as high as possiby its already ripped to shreds from scraping the floor
possibly look at checking actuator as does feel a bit laggy for some reason

and eventually itll be painted purple.
possibly a 180sx type x front bumper soon as well, as reckon thatd finish it off nicely

FUCK THAT LOOKS SSSOOOOOO BADASS i love it...

i should have tinted my lexus lights instead of fitting zenki's

Nice project lad, keep up the good work, looking well

That is a really cool project! I like the low on the facelift bumper with splitter but sometimes I guess it pays to take the common sense route :rolleyes:
Did it take you long to do the bride fabric?

Man I love it! :) Absolutely gorgeous looking!

Love it!! will be following this , Go on the CA:)

Mean looking.. Feckin love it

fuck love that look keep up the good work lad

Why people stick kits on and then try make it look good?
Wheels, low, or even just fill the arches!

Seen bits and pieces of everything you get into man, and if only I had a few quid to splash I'd have something with similar vibes to your stuff above.

Just keep at it man!


You just manage to hoard the Wangan willy duck tail or did you buy it new?
Many spacers did you place on the rods? (under the boot where the road screws in yea?)