help with fitting my dished steering wheel?

well lads this morn i tried my hand at fitting an omp dished steering wheel to my liner but im after coming across a couple of problems and need some help.
http://i1128.photobucket.com/albums/...lbum1001-1.jpg
http://i1128.photobucket.com/albums/.../album1003.jpg
in the above picture's it show the boss kit i got which i was told would suit my r33 but the plastic prong thingy is in the way. would it be ok to cut this off?

http://i1128.photobucket.com/albums/.../album1005.jpg
http://i1128.photobucket.com/albums/.../album1004.jpg
in these two photo's are the connection's that came with the boss kit but don't seen to suit my r33. any suggestions lads?

http://i1128.photobucket.com/albums/...lbum1002-1.jpg
i also found this connection loose when i took of the old steering wheel and cant seem to find where it goes, any ideas as to what its for?

ya need to get a hicas boss kit, i had same issue with r34 if ya use a normal boss kit your horn etc wont work where as with a hicas all works as it should

balls, looks like i have to send it back then.
was looking forward to having this done and all

You would want to stop spendin money on stupid things and get your car running properly!!!

i have that same brown plug in my s14a and no idea what its fo or where it goes.
i dont even know if its part of the s14a wiring, or part of the wiring of the rb25 engine conversion.
heres mine,
http://i56.tinypic.com/2rz6idv.jpg
was there a multifunction steering wheel option in these cars where the wheel had switches on it for the audio/sat nav maybe?

the yellow connetor you have looks like its the airbag delete connection for removing the airbag without the light comming on.
the box probably has nothing more then a resistor in it.

the black one is for the horn i think.
you would clip the red wire under the steering cowl, put a spade connector on it to fit in one end and the black plug would go into your new horn on your new wheel.

As it was said before lad. why would ya do dtuff you don't know how to do. it would cost bout 15 euro's to get it fitted and you woudnt have to worry bout the steering wheel faling off down the road ha.. i take it that you also disconnected the battery before you took off the air bag ya?

Quote:

---

Originally Posted by ian g sr20

As it was said before lad. why would ya do dtuff you don't know how to do. it would cost bout 15 euro's to get it fitted and you woudnt have to worry bout the steering wheel faling off down the road ha.. i take it that you also disconnected the battery before you took off the air bag ya?

---

no airbag in my steering wheel lad, for some reason there's a spec 1 steering wheel fitted to my spec2 car.
why would i spend 15euro's for some1 to fit it for me when its a simple enough job?....well, once you the correct parts like :(

@topdog - these are only small thing that want done, next step id tdp for the Nistune. welcome to come along that day if ya want?

@topdog - these are only small thing that want done, next step id tdp for the Nistune. welcome to come along that day if ya want?[/QUOTE]

Ya but you dont have the money to get it mappedd cause you keep spendin your money on ''small things'' stop buyin things you dont need a while and save up the money to get your car fixed! Just my 2c like

Quote:

---

Originally Posted by topdog

@topdog - these are only small thing that want done, next step id tdp for the Nistune. welcome to come along that day if ya want?

---

Ya but you dont have the money to get it mappedd cause you keep spendin your money on ''small things'' stop buyin things you dont need a while and save up the money to get your car fixed! Just my 2c like[/QUOTE]

maybe you 2 should just fight it out, its his car and his money, let him spend it on whatever he wants

He does spend it on what ever he wants, eg this thread!!! As you know his car is not running right and for all we know could be doin damage to the engine, Just think he should make it priority, dont you?