Westfield 4age.

[Quille]

hey i know its not the usuall car ye have hear but i hope u like it its a westfield chassie 20v sliver top with twim cam gear box and a ford back axle. gotec stand alone engine management, with L/c this has take me a while and is still no compleeted fully, its about 90 %
http://i946.photobucket.com/albums/ad307/rnd_audio/Image001.jpg
the back side of the dash, about to be wired
http://i946.photobucket.com/albums/ad307/rnd_audio/Image003.jpg
rolling chasie, with engine and box mocked up
http://i946.photobucket.com/albums/ad307/rnd_audio/Image004.jpg
home made manafold, you can clso see the cluch fork comes out the opposite side of the twin cam gear box, and i made a hydro pull clutch, because of space issues.
http://i946.photobucket.com/albums/ad307/rnd_audio/Image005.jpg
altezza inspired clocks, three internal clocks, oil temp presure and water temp, inside a tacko
http://i946.photobucket.com/albums/ad307/rnd_audio/Image006.jpgthe engine was moved back 6.5 inches to the bulk head for better weight transfer it clears the bulk head be 2mm, if there is light in the gap its perfect :)
http://i946.photobucket.com/albums/ad307/rnd_audio/Image007.jpgthis is a close up of the clutch fork switch usually it would come out bottom right of the box, but that would be in my pedal box so it HAD to be moved. work a treat third time round :)
http://i946.photobucket.com/albums/ad307/rnd_audio/Image008.jpgu can see the fuel pump and filter mounted under the axle amd bradedlines through out, qualife 2 way diff also fitted
http://i946.photobucket.com/albums/ad307/rnd_audio/Image009.jpg
http://i946.photobucket.com/albums/ad307/rnd_audio/Image023.jpgbody work for mock up
http://i946.photobucket.com/albums/ad307/rnd_audio/Image024.jpg dash fitment with water tight seal
http://i946.photobucket.com/albums/ad307/rnd_audio/Image026.jpg
http://i946.photobucket.com/albums/ad307/rnd_audio/Image034.jpg gear box rebuild and recondition
http://i946.photobucket.com/albums/ad307/rnd_audio/Image035.jpg
http://i946.photobucket.com/albums/ad307/rnd_audio/Image039.jpgfinal paint of the starter and all the other little bits, also a modified trd short shifter.
http://i946.photobucket.com/albums/ad307/rnd_audio/Image042.jpgtrigger wheel for the ecu built solid so NO vibrations
http://i946.photobucket.com/albums/ad307/rnd_audio/Image043.jpgaltinator recon and paint
http://i946.photobucket.com/albums/ad307/rnd_audio/Image124.jpgcustom wheels to fill the arches. no spacers..
http://i946.photobucket.com/albums/ad307/rnd_audio/Image136.jpgthe exrta lock is a little seceret i have no extra locking arms used.... i fitted a qualife 2.2 quick rack also
http://i946.photobucket.com/albums/ad307/rnd_audio/Image138.jpg the extra lock from the front.


hope u enjoyed this more pics to follow, any questions just ask :)

AND FINALLY A BIG THANKS TO ROCO PROFORMANCE FOR EVERYTHING, ESPACIALLY USE OF HIS SHED... COULDN HAVE DONE IT WITH OUT HIM...

[Stevo]

Looks fun :D

[kev86]

ah I seen this in the metal, great work you've put into it, should be fun out on the track!!! let us know what power it puts out after mapping???

[Alan B.]

was the chassis built from plans by roco or bought?
i have the book on building one and have always wanted to give it a go.

[Robbie Daly Ps13]

Top top work lad...! Credit to ya.....!

[PeterT]

Fuckin savage! real soft spot for these!

[S13..KEV]

love this kit car i do.looks savage in the flesh.well done darren :D

[Quille]

was the chassis built from plans by roco or bought?
i have the book on building one and have always wanted to give it a go.

i bought this one but i may as well have built it will all the mods ive done to it. roco has built a few buggys from scratch so this would not be a prob for him :)

[copeyhagen]

nice lookin build.

purely for track use?

[Kane-Driftcommunity]

nice lookin build.

purely for track use?

will it be drifted??

[Quille]

yep for the moment it will be for the track till i can afford vrt :) and yep it will be drifted, but not in comps as the spaceframe chassie isnt allowed, but u will see it at drift days and what ever i can enter

[PS13!]

how much bhp would that have man?

[Quille]

the engine is just standard, so im hoping for a realistic 150bhp for now. later with mods im hoping to get it to the 180bhp figure. but its the power to weight that will make if quick im hoping for a finished weight of beween 450 and 480kgs

[Aidan Hogan]

Thats a real cool looking kit car , cool that your gonna slide it too :D

[Doofer]

Cool as Fcuk!!! Fair play to ya...

[Alan B.]

i bought this one but i may as well have built it will all the mods ive done to it. roco has built a few buggys from scratch so this would not be a prob for him :)

ah yeah, ive seen their work. top stuff. i was just curious about weather they built your particular chassis or you bought it. did you buy it new or from a project started and never finished by somebody else?.

[Quille]

no i bought in new in the uk, the frame and body panels came as a kit, and then its up to u to fill it with what u want.