PDA

View Full Version : What rims should i go for?



copeyhagen
10-08-10, 11:05
Well,

would like people opinions on what rims i should go for on the chaser.
http://img825.imageshack.us/img825/9726/photo0091.jpg

someone had suggested looking out for 2 rezax on yahoo.jp with a big dish and put my rears on the front and put the 2 new ones on the rear.

i personally like the rezax on it so im in no serious rush to change em, wouldnt mind waiting for the right set.

the rears will be spaced out of course asap.

was thinking if i was changing them all to go for a sset of work vs kf or something? any other ideas?

id say i could fit 10.5 on the rears?, what kind of offsets would i be looking for?

cheers

Rob

Mick K
10-08-10, 11:13
http://www.workwheelsusa.com/media/gallery/23/583_full.jpg

mossyhennebry
10-08-10, 11:18
i like Mick's suggestion - something to brighten up the car, a bit of chrome.

ste
10-08-10, 11:22
Did greg not have rubbing issue's wit his 17x10 volks?

Greg
10-08-10, 12:05
I had trouble with the rim hitting the body of the coilover alright when running 18x10.5 with weak offsets. The 17x10 +28 or +31 with 265 or 255/40 didn't scrub, but I ran 225/40 to be sure. The arches are rolled on my car though.


Edit - Get something else besides the usual Di fascination, SSRs. :D

Fredericks Balls
10-08-10, 12:17
Don't forget he has a lot of rear arch work and wider front wings...

I still love those work emitz! I also like the idea of the 2 rezax, I never liked those rezax but more recently I'm liking them a lot

nikkisixx69
10-08-10, 12:39
some inspiration

work vs-kf http://www.iputinwork.com/wp-content/uploads/2009/09/chaser_kf.jpg

http://www.iputinwork.com/wp-content/uploads/2009/08/toyota_vskf.jpg

work meister s1

http://www.iputinwork.com/wp-content/uploads/2009/08/toyota_meisters13pc.jpg

http://www.rimtuck.com/photos/1230356931.jpg


deep dish varianzas would look savage IMO

http://www.iputinwork.com/wp-content/uploads/2010/02/g35_t1s_sr_msp.jpg

copeyhagen
10-08-10, 13:16
mmmm some nice options there, never seen the varianzas with a dish before, looks nice.

yeh my rear arches should be able to handle the 10.5's i think.

i think the ssr's are nicer than the meisters but thats a personal preference.

btw the wheels that are on now jus need a polish of some autosol. theyre manky.

the vs-kf's look awsome, missed a set on here by like a few hours..grrr

so soemthin polished with a good offset is winner winner chicken dinner?

way2fastforu
10-08-10, 13:16
work vs-kf in man sizes ftw:D

copeyhagen
10-08-10, 13:33
http://www.iputinwork.com/wp-content/uploads/2009/09/chaser_kf.jpg

what would the offsets on these be?!

copeyhagen
13-08-10, 15:07
anyone think these would suit it, i was hopin for wider than 9.5s but with a spacer might work ;)

http://driftireland.com/attachment.php?attachmentid=2444&d=1278526191

Greg
13-08-10, 15:09
Personally I hate that style of rim, so I'm gonna say no. :)

Alan B.
13-08-10, 15:12
its a big tank of a car so something with chunky spokes, thin spoked wheels or mesh will look shite on it imo.

Baz_180
13-08-10, 15:33
My vote is for the work vs-kf! they look unreal... probably an unreal price tag to with with them too. Have you got onto Carpo I sure he has/can get something nice

Titan Autoworks Japan
13-08-10, 15:52
work vs-kf:D

copeyhagen
13-08-10, 16:12
id love the vs-kf's but theyre hard to come by

Fredericks Balls
13-08-10, 16:30
I quite likethose wheels actually but id only have two. All four would be too much flatness and chrome but a wide pair on the back and something meshy to balance it out on the front might work??

carpo
14-08-10, 17:58
just spotted these goin through in the morning

18 x 10.5j -36

nikkisixx69
14-08-10, 17:59
just spotted these goin through in the morning

18 x 10.5j -36

exactly what you want!! how much in the country carpo?

carpo
14-08-10, 18:23
here is another two

18 x 10.5j -12

carpo
14-08-10, 18:25
exactly what you want!! how much in the country carpo?

around 1000/1200 euro delivered

copeyhagen
14-08-10, 18:35
around 1000/1200 euro delivered

would that be for a pair or all 4?

carpo
14-08-10, 18:42
a pair dude..there very expensive seen a complete pair goin through 180,000jpy + costs+ shipping

copeyhagen
15-08-10, 20:05
jesus thats mad dear.

is it possible to use my centres and get custom dishes made up?!

Alan B.
15-08-10, 21:38
jesus thats mad dear.

is it possible to use my centres and get custom dishes made up?!

if you have proper split rims, yeah, you can get whatever dishes, or dishes and barrels if you have 3 piece splits, that you want made up.

handy when you have wheels that are not BBS or Schmidt that you want to widen.

copeyhagen
15-08-10, 21:42
if you have proper split rims, yeah, you can get whatever dishes, or dishes and barrels if you have 3 piece splits, that you want made up.

handy when you have wheels that are not BBS or Schmidt that you want to widen.

yeh theyre 3 pc split afaik

any idea who could do up custom dishes?

expensive?

cheers

Alan B.
16-08-10, 00:15
not much more expensive then say off the shelf dishes for BBS or Schmidt.

Titanium Touch do them.
they are based in germany i think.
you get in touch with them with all the specs of the wheel dish you need, number of holes, pcd of the dish holes etc etc and they should be able to quote you then.

throw up a pic of the front and rear of the wheel.

nikkisixx69
16-08-10, 00:28
not much more expensive then say off the shelf dishes for BBS or Schmidt.

Titanium Touch do them.
they are based in germany i think.
you get in touch with them with all the specs of the wheel dish you need, number of holes, pcd of the dish holes etc etc and they should be able to quote you then.

throw up a pic of the front and rear of the wheel.

unfortunatly they probably cant

last year i was onto them, wanted to get my ssr's widened, and after i sent in all the specs they said they couldnt! but do try!

image wheels in the uk can do it , pricey , but there work is immaculate!

copeyhagen
16-08-10, 08:14
cheers ill check em both out later, pricey as in cost of a second hand set of wheels pricey?! or costly like a few hundred euro?
:D

nikkisixx69
16-08-10, 12:31
cheers ill check em both out later, pricey as in cost of a second hand set of wheels pricey?! or costly like a few hundred euro?
:D

image said they could make me 2 new inner and outter rims for like 700 sterling. pricey, but your getting 2 brand new wheel prctcally made to what you want! i was gonna have like a 6.5 inch dish!

copeyhagen
16-08-10, 13:05
image said they could make me 2 new inner and outter rims for like 700 sterling. pricey, but your getting 2 brand new wheel prctcally made to what you want! i was gonna have like a 6.5 inch dish!

pricey but i suppose ur right, ur getting brand new outers.

might get in touch and see if they could do anything

Alan B.
16-08-10, 14:08
did they give any reason as to why the couldnt make em?

nikkisixx69
16-08-10, 14:44
pricey but i suppose ur right, ur getting brand new outers.

might get in touch and see if they could do anything

new outers AND new inner barrels! so you put your centre in them you have brand new wheels with mad dish!


did they give any reason as to why the couldnt make em?

i think they could but they could only make flat dishes up to 3 and a half inches or somethin like that, which was what i already had. they advertised they could do 6 inch flat dishes, but then turned out they couldnt.

that said, if its stepped dishs you want, they can make you up to 6 inch dishs, so iff you have sp1's and the like your onto a winner!

it was over a year since i dealt with them, so your best to try them yourself again as they might be doing that stuff now,

they know there german wheels a lot better than there jap wheels, so thats what those dishes are generally aimed at. they didnnt even no what ssrs where haha!

copeyhagen
16-08-10, 15:20
new outers AND new inner barrels! so you put your centre in them you have brand new wheels with mad dish!



i think they could but they could only make flat dishes up to 3 and a half inches or somethin like that, which was what i already had. they advertised they could do 6 inch flat dishes, but then turned out they couldnt.

that said, if its stepped dishs you want, they can make you up to 6 inch dishs, so iff you have sp1's and the like your onto a winner!

it was over a year since i dealt with them, so your best to try them yourself again as they might be doing that stuff now,

they know there german wheels a lot better than there jap wheels, so thats what those dishes are generally aimed at. they didnnt even no what ssrs where haha!

haha.

the standard rezax dish is kind at a 45 degree engle if ya aget me (will get pics of front and rear later)

i was thinkin like 5 or 6 inch flat dish for the rears alright.

might get away with my rears on the front but the dish on fronts and rears is quite similar and fairly weak.

pics will be up later!

i think the rezax suit the car so maybe it would be worth payin the money and gettin them done if they can do it now?

Alan B.
16-08-10, 16:29
jap wheels are a bit odd alright, my 18 inch centres fit perfectly with my 17 inch dishes and rear barrells.

copeyhagen
26-08-10, 09:48
what yas reckon aboput these for the fronts
http://i186.photobucket.com/albums/x88/bubble1984/wheels/IMG_1985.jpg

could polish the centres or whatever. then get same wheels with bigger dish and like 11j or somethin off yahho acutions jp for the rears?

then get custom dishes done up for the rezax and sell one set down the line!

remember, these would be for fronts

opinions plz!!

EDIT*** heres the rears i would be after :D
http://maxpowermag.files.wordpress.com/2009/01/koenig_japan_celsior-img600x450-1223636372yf06um74589.jpg

rob

nikkisixx69
26-08-10, 11:50
they are sweet!!! love those wheels! doesnt a lad on here from cork have a serious set on his vip s14.5

copeyhagen
26-08-10, 11:58
you reckon im onto a winner here nikki?

will have the moneys next month to get a serious dish set for rears from yahoo jp

nikkisixx69
26-08-10, 12:14
you reckon im onto a winner here nikki?

will have the moneys next month to get a serious dish set for rears from yahoo jp

if you can come up with some sweet rears i reckon its a winner!

copeyhagen
26-08-10, 12:33
sorted so :D

whos best to use for yahoo jp, does tom @ titan act as a buyer for it if i wanna buy off it?

Titan Autoworks Japan
26-08-10, 12:41
sorted so :D

whos best to use for yahoo jp, does tom @ titan act as a buyer for it if i wanna buy off it?

yep i do indeed:)

copeyhagen
26-08-10, 13:05
had a feelin ya might tom ;)

ill be after 2 of them koenig ks? next month, maybe 10.5j to 11.5j or thereabouts with a negative offset would be nice ;)

like the ones i put the pic up of.

if only i could get onto the yahoo jp auctions in work :mad:

nikkisixx69
26-08-10, 13:13
http://img205.auctions.yahoo.co.jp/users/7/8/5/1/mako213359-img600x451-1282744753jqvnya72245.jpg

these guys are starting out at 40000 yen , althought they will go for much more!

http://img255.auctions.yahoo.co.jp/users/2/7/9/0/koenig_japan_celsior-img600x450-1223636372yf06um74589.jpg

these ones are 200000 yen

markII-90
26-08-10, 13:18
The first set you posted nick are mercedes fitment 5x112 was just looking at them there..

nikkisixx69
26-08-10, 13:32
The first set you posted nick are mercedes fitment 5x112 was just looking at them there..

ahh! didnt spot that! would look mental on a nice merc:D:D

Titan Autoworks Japan
26-08-10, 13:38
need any help with the translations just give me a shout.cause i know those google translators are a joke.

these came off a mark II
http://i48.photobucket.com/albums/f235/tilo1986/chiba.jpg

copeyhagen
26-08-10, 16:39
2k euro for 2 wheels is mental money, before tax / shipping too!!

nikkisixx69
09-09-10, 20:16
wheels so good im putting them on both your threads

keep saving;)

12j -31

http://cgi.ebay.co.uk/VIP-SSR-18x-11...item3a5e5c2586

or 13j -27

http://cgi.ebay.co.uk/VIP-RAYS-18x-1...item3a5e55260a

copeyhagen
09-09-10, 21:03
yeh the vs-kfs are sex.

both links dont work nikki

copeyhagen
15-09-10, 12:34
gettin these off carpo
http://driftireland.com/showthread.php?t=11345

fronts look to be prices reasonable enough on yahoo jp so will get 9j or 9.5 fronts in a few months