View Full Version : S14/S14a/SR parts
I'll be updating this thread as I remove parts from the car.
Current parts for sale:
80k VVT, very quite, hardly no rattle, €100
Fidanza Flywheel, €150
Engine less cams and injectors, €600 or €650 with VVT from above or €750 with Fidanza flywheel and VVT
2-3k OEM Nissan lambda sensor (not aftermarket, brand new from main dealer!), €100
S14A h-dev stage 2 ecu, €150
Apex type 1 exhaust manifold, cracked but fixable, Sold
Autometer 52mm Boost gauge, €50
2-3k VVT, perfect, no rattle, Sold
HKS Cams Step 1, 256 In, 264 Out, Sold
HKS Exhaust vernier sprocket, Sold
Apex s14a elbow, cracked but fixable, Sold
Apex s14a downpipe, Sold
Gearbox, Sold
Nismo mounts, Sold
ACT Extreme clutch (lot of life left), Sold
Apex short shifter, Sold
Apex braided turbo lines, Sold
There may be other parts aswell as time goes on but that's it for now.
As I remove parts I'll add them on in.
PM if you're interested in parts.
Jay Rockett
16-05-09, 16:50
80k VVT, very quite, hardly no rattle, ?100
What exactly are ya selling here martin, the engine or VVT components??
I'll take that short shifter off ya too!
Its a vvt sprocket. It goes on the end of the inlet cam. Its tandard on all s14/s14a/s15's. When they get old they tend to rattle. Trust me when you hear it you'll know it.
50 for the tubby lines???????
50 for the tubby lines???????I think I have them sold. Just need to hear back from a lad.
Right folks. I really need everything gone now. My own car is getting to the point where I need all the space I can get.
I'll also have a GReddy Type M FMIC up for sale shortly. One of he pipes was damaged and was leaking but has been completely repaired and was holding over 2.0bar the last time I tested it (that was done in a pressure test not through the engine incase anyone was wondering).
nothing of any use to me here, but is your sig changing every time i look at differant threads?!
Its not actually a slide show, its php scripts changing it everything it loads. Same as on my own site. Its not actually that complicated to do once you have php web hosting.
Jay Rockett
04-06-09, 22:02
Thats pretty cool ha!
Dont have an R33 box butcherd to fit an SR by any chance??
Fraid not J although if you can find a R33 box and prop I know where you can get n adapter plate so it bolts straight on.........
Jay Rockett
04-06-09, 22:41
I'll pm ya there Martin, cheers!
Right folks. I really need everything gone now. My own car is getting to the point where I need all the space I can get.
I'll also have a GReddy Type M FMIC up for sale shortly. One of he pipes was damaged and was leaking but has been completely repaired and was holding over 2.0bar the last time I tested it (that was done in a pressure test not through the engine incase anyone was wondering).
PM me a price on that when ya have it martin
cheers :D
PM me a price on that when ya have it martin
cheers :DNo bother. I'll have a look at it today and see.
T28 martin?Nope, sorry lad. Both turbo's that I had are gone.
any chance u have a left headlight for s14a??
Nope, sorry. The car itself is still in perfect condition and isn't being broken. Although in a week or 2 I should know where there'll be a full s14a for breaking.
Jay Rockett
05-06-09, 12:48
Nope, sorry. The car itself is still in perfect condition and isn't being broken. Although in a week or 2 I should know where there'll be a full s14a for breaking.
Let us know soon as ya can martin, may be interested in the front end!
Prices updated. Whats left needs to go now! Any decent offer will be considered.
Intercooler still there?? Also what engine mods would be needed for stage 2 ecu
At the moment yes but its still not or sale. It will be but not until I've made double sure any of its parts won't be needed.
For a stage 2 you need nismo 555's, uprate fuel pump, fmic, exhaust and air filter. You can go up to 1.2 bar then. Lads regularly see over 300bhp. Mine made 297 with it.
I see by your sig you're looking for a lot of parts. I'll do you a deal on what I have if you want. The only thing you need are injectors and cams. I should be able to sort a set of standard cams if you need them.
Also the ecu is for a s14a, not a s14 s they are very different.
Cheers. Basically I need full loom for a 14a. Building a project car and got a burned doner car. If the front mount comes up I'd def be interested with the ecu. Do you need cams for stage 2 as well then?
Bump again, 1jz is getting closer!!!
Lads I really want the parts listed above gone. Any decent offers take them away. The FMIC isn't up for grabs at the moment as I'm still unsure if it'll be used.
ted have you the downpipe, manifold and elbow still there???
Manifold should be gone but I'll be down home tomorrow night and I'll have a look and see what else is there.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.