PDA

View Full Version : S14/S14a/SR parts


Muttly
16-05-09, 07:57
I'll be updating this thread as I remove parts from the car.

Current parts for sale:
80k VVT, very quite, hardly no rattle, €100
Fidanza Flywheel, €150
Engine less cams and injectors, €600 or €650 with VVT from above or €750 with Fidanza flywheel and VVT
2-3k OEM Nissan lambda sensor (not aftermarket, brand new from main dealer!), €100
S14A h-dev stage 2 ecu, €150
Apex type 1 exhaust manifold, cracked but fixable, Sold
Autometer 52mm Boost gauge, €50
2-3k VVT, perfect, no rattle, Sold
HKS Cams Step 1, 256 In, 264 Out, Sold
HKS Exhaust vernier sprocket, Sold
Apex s14a elbow, cracked but fixable, Sold
Apex s14a downpipe, Sold
Gearbox, Sold
Nismo mounts, Sold
ACT Extreme clutch (lot of life left), Sold
Apex short shifter, Sold
Apex braided turbo lines, Sold

There may be other parts aswell as time goes on but that's it for now.

As I remove parts I'll add them on in.

PM if you're interested in parts.
Jay Rockett
16-05-09, 16:50
80k VVT, very quite, hardly no rattle, ?100

What exactly are ya selling here martin, the engine or VVT components??

I'll take that short shifter off ya too!
Muttly
16-05-09, 19:37
Its a vvt sprocket. It goes on the end of the inlet cam. Its tandard on all s14/s14a/s15's. When they get old they tend to rattle. Trust me when you hear it you'll know it.
Stevo
17-05-09, 13:08
50 for the tubby lines???????
Muttly
20-05-09, 08:00
50 for the tubby lines???????I think I have them sold. Just need to hear back from a lad.
Muttly
04-06-09, 12:53
Right folks. I really need everything gone now. My own car is getting to the point where I need all the space I can get.

I'll also have a GReddy Type M FMIC up for sale shortly. One of he pipes was damaged and was leaking but has been completely repaired and was holding over 2.0bar the last time I tested it (that was done in a pressure test not through the engine incase anyone was wondering).
PeterT
04-06-09, 15:48
nothing of any use to me here, but is your sig changing every time i look at differant threads?!
s13-ste
04-06-09, 15:53
slide show sig FTW
Muttly
04-06-09, 21:58
Its not actually a slide show, its php scripts changing it everything it loads. Same as on my own site. Its not actually that complicated to do once you have php web hosting.
Jay Rockett
04-06-09, 22:02
Thats pretty cool ha!

Dont have an R33 box butcherd to fit an SR by any chance??
Muttly
04-06-09, 22:05
Fraid not J although if you can find a R33 box and prop I know where you can get n adapter plate so it bolts straight on.........
Jay Rockett
04-06-09, 22:41
I'll pm ya there Martin, cheers!
Romo
04-06-09, 23:50
Right folks. I really need everything gone now. My own car is getting to the point where I need all the space I can get.

I'll also have a GReddy Type M FMIC up for sale shortly. One of he pipes was damaged and was leaking but has been completely repaired and was holding over 2.0bar the last time I tested it (that was done in a pressure test not through the engine incase anyone was wondering).

PM me a price on that when ya have it martin

cheers :D
s13-ste
04-06-09, 23:53
T28 martin?
Muttly
05-06-09, 08:47
PM me a price on that when ya have it martin

cheers :DNo bother. I'll have a look at it today and see.
T28 martin?Nope, sorry lad. Both turbo's that I had are gone.
meego1
05-06-09, 09:06
any chance u have a left headlight for s14a??
Muttly
05-06-09, 10:46
Nope, sorry. The car itself is still in perfect condition and isn't being broken. Although in a week or 2 I should know where there'll be a full s14a for breaking.
Jay Rockett
05-06-09, 12:48
Nope, sorry. The car itself is still in perfect condition and isn't being broken. Although in a week or 2 I should know where there'll be a full s14a for breaking.



Let us know soon as ya can martin, may be interested in the front end!
Muttly
07-10-09, 09:28
Prices updated. Whats left needs to go now! Any decent offer will be considered.
Muttly
08-10-09, 20:18
Bump. Any interest?!?
Kav gts-t
09-10-09, 07:39
Intercooler still there?? Also what engine mods would be needed for stage 2 ecu
Muttly
09-10-09, 07:52
At the moment yes but its still not or sale. It will be but not until I've made double sure any of its parts won't be needed.

For a stage 2 you need nismo 555's, uprate fuel pump, fmic, exhaust and air filter. You can go up to 1.2 bar then. Lads regularly see over 300bhp. Mine made 297 with it.
Muttly
09-10-09, 07:53
I see by your sig you're looking for a lot of parts. I'll do you a deal on what I have if you want. The only thing you need are injectors and cams. I should be able to sort a set of standard cams if you need them.

Also the ecu is for a s14a, not a s14 s they are very different.
Kav gts-t
09-10-09, 08:25
Cheers. Basically I need full loom for a 14a. Building a project car and got a burned doner car. If the front mount comes up I'd def be interested with the ecu. Do you need cams for stage 2 as well then?
Muttly
09-10-09, 09:32
No, just standard cams.
Muttly
11-02-10, 08:38
Bump again, 1jz is getting closer!!!
Muttly
22-03-10, 08:41
Lads I really want the parts listed above gone. Any decent offers take them away. The FMIC isn't up for grabs at the moment as I'm still unsure if it'll be used.
bart
22-03-10, 17:26
ted have you the downpipe, manifold and elbow still there???
Muttly
22-03-10, 20:32
Manifold should be gone but I'll be down home tomorrow night and I'll have a look and see what else is there.