PDA

View Full Version : The Devil JZ86



Kruizer
12-07-10, 14:27
I'm going to be building this car for next year but here is whats done so far, who knows what it'll end up like. There will be an awful lot of trial and error to get this baby to work right but I'm sick to the teeth of show cars so I need to have some track fun.

Any help is appreciated btw:p

Thanks go to (So Far) :

Becky
Trevor aka Burner
Share Carmody
KPstarlet
Beans
Liam
Eric O'Sullivan
Martin Ffrench
David Bell
MCN Sport (Peden)
Just Jap (Bart)
JDM Jap Parts (Christy Carpenter)

http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0001.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0002.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0003.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0004.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0005.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0006.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0007.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0008.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0009.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0010.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0011.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0012.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0013.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0014.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0015.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0016.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0017.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0018.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0019.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0020.jpg

Kruizer
12-07-10, 14:28
The shell now dropped to Cork it wastime to start repairing any rust, flattening the engine bay, fitting wider quarters and a good bit more...

http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0021.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0022.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0023.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0024.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0025.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0026.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0027.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0028.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0029.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0030.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0031.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0032.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0033.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0034.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0035.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0036.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0037.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0038.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0039.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0040.jpg

Kruizer
12-07-10, 14:29
In this batch of pic's you can see that every panel in the engine bay is being welded shut, all bolt holes welded, any gromit holes plated and fully seam welded in order to present a perfectly flattened engine bay. Also you will see that circled problem area's have been repaired and that the shell has started to make proper headway.

http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0041.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0042.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0043.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0044.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0045.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0046.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0047.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0048.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0049.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0050.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0051.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0052.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0053.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0054.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0055.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0056.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0057.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0058.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0059.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0060.jpg

Kruizer
12-07-10, 14:31
As you can see the engine bay is still having all bolt holes welded up, repair of the few trouble spots, rear pocket removal to save weight, seam welding underneath, quarter panel repair and the start of the filler work on the flushed gromit holes...

http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0061.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0062.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0063.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0064.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0065.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0066.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0067.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0068.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0069.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0070.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0071.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0072.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0073.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0074.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0075.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0076.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0077.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0078.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0079.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0080.jpg

Kruizer
12-07-10, 14:31
The next lot are a continuation from the last bunch along with fitting the Dmax wide arch quarters, priming the underneath and getting ready to protect the underneath with stonechip...

http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0081.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0082.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0083.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0084.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0085.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0086.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0087.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0088.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0089.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0090.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0091.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0092.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0093.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0094.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0095.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0096.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0097.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0098.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0099.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0100.jpg

Kruizer
12-07-10, 14:32
here are a few more of the shell getting filler work done, mostly the engine bay...

http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0101.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0102.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0103.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0104.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0105.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0107.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0109.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0110.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0111.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0112.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0113.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0114.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0115.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0116.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0117.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0118.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0119.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0120.jpg

Don't worry about the bodywork pic's, they'll be over soon enough...

Kruizer
12-07-10, 14:33
Last of the filler work and onto primer, at pic 184 the bodywork pic's are over on the shell, last one is 140 here so not long to go and I can show yee some rimmage...

http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0121.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0122.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0123.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0124.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0125.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0126.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0127.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0130.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0131.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0132.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0133.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0134.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0135.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0136.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0137.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0138.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0139.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0140.jpg

Nice smooth engine bay....

Kruizer
12-07-10, 14:34
I'm afraid just more boring primer pic's, next week, undersealing ha, ha, ha, ha.....

http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0141.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0142.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0143.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0144.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0145.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0146.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0147.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0148.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0149.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0150.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0151.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0152.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0153.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0154.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0155.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0156.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0157.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0158.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0159.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0160.jpg

Kruizer
12-07-10, 14:35
Last of the primer work and undersealing now, next Monday you should start to see some of the parts I have been gathering for this :

http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0161.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0162.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0163.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0164.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0165.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0166.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0167.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0168.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0169.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0170.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0171.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0172.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0173.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0174.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0175.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0176.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0177.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0178.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0179.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0180.jpg

serious tom
12-07-10, 14:37
at least your not hanging about!
Good stuff!
Looking forward to seeing how this turns out.

Kruizer
12-07-10, 14:38
@ serious love : I'm sick to the teeth of wasting money on cars, by christ this is gonna get some death so at least it will be money well spent...

Hows about some ultra rare redlines, some advans, equips and custom built Image wheels and sure throw in a cusco cage :

http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0181.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0182.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0183.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0184.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0185.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0186.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0187.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0188.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0189.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0190.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0191.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0192.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0193.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0194.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0195.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0196.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0197.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0198.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0199.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0200.jpg

Kruizer
12-07-10, 14:40
Oh ya say hello to the powerplant JZ86 style

http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0201.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0202.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0203.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0204.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0205.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0206.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0207.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0208.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0209.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0210.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0211.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0212.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0213.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0214.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0215.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0216.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0217.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0218.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0219.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0220.jpg

Kruizer
12-07-10, 14:41
This will be my last update for a while unless I get a job or sell a car Lmao :rally: So while I was out at Carpo's I found 2 Equip 01's hdden in the corner and snapped them up straight away to complete the set so now I even have a spare.

http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0221.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0222.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0223.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0224.jpg

In keeping with the lightweight focus I decided to get a complete set of bronze polycarbonate lexan window kit with sliders. Was sick of looking at the Image wheels with no rubber so dropped into Ger at Midwest Tires (highly recommend) and got some nice Toyo's up front and Nexen's for the rear :rock:

http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0225.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0226.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0227.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0228.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0229.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0230.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0231.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0232.jpg

Since my exams were over in FAS I had 2 weeks to kill so I decided to make a stand so that the shell was move able yet high enough to work on without doing in my back...So with the help of Mossy cut up some angle iron and made up the frame, shot of matt black and green wheels LoL Got the shell up onto it and strapped it to the shell...

http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0233.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0234.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0235.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0236.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0237.jpg

Next update I hope to have a gearbox sorted (Getrag 6-Speed) as I have already sourced a complete Supra rear subframe including diff and shafts. Once I have that it will be suspension time and up to Ffrenchie's for mock up and fitment to get her rolling on the Image wheels.

serious tom
12-07-10, 14:42
Yum, Yum, Yum... and more Yum!
Some things there i would defo have if i owned an 86..
oh.. and why the two sets of redlines? greed?
:p

nikkisixx69
12-07-10, 14:48
haha FUCK YEAH!!! thats insane man!!!! glad to see its well underway!

vents lookin good btw;)

Stevo
12-07-10, 14:54
Hero spec bren!!! christ thats gonna be sum weapon :cool:

Kruizer
12-07-10, 15:09
Yum, Yum, Yum... and more Yum!
Some things there i would defo have if i owned an 86..
oh.. and why the two sets of redlines? greed?
:p

I know people are gonna say "What the fuck are you fitting a 1J for ?" but being honest I couldn't give a fiddlers fuck what anyone thinks, never have, never will. I'm the lad who's gonna have to handle it.

As for the redlines I figured if I loose it, I'll be going backwards into something so I got a spare set ;)


haha FUCK YEAH!!! thats insane man!!!! glad to see its well underway!

vents lookin good btw;)

Have to try keep up with project wrong fitment ;)

Vent is being used to support the V-Mount set up I'm gonna run, once I know where the intercooler's final resting place is, I'll attach the vent to the FG bonnet.


Hero spec bren!!! christ thats gonna be sum weapon :cool:

I've alot more to pick up for this baby, 9k gone so far and its not even rolling on its own wheels LoL Looking at a Tilton 75 Series full pedal box set up, holset HX40 with japspeed mani and external wastegate so as the engine bay is bling and as empty as possible...

nikkisixx69
12-07-10, 15:13
what made ya go with a v mount set up man??

p.s project wrong fitment will continue once royal mail gets its shit together!:mad:

ger15
12-07-10, 15:36
Fuck thats going to be a slightly Crazy Machine :eek:

Kruizer
12-07-10, 15:46
what made ya go with a v mount set up man??

p.s project wrong fitment will continue once royal mail gets its shit together!:mad:

Shortest amount of piping so the quickest cooling possible as the 1J's suffer from heat issues. Also I'll be moving the engine back into the cabin slightly for better weight distribution, only had the shell worked on so as to get it right for the fabication.

You serious ? FFS


Fuck thats going to be a slightly Crazy Machine :eek:

Fingers crossed ;)

alan opel
12-07-10, 15:47
savage dude! gona be epic when its all together!

nikki
12-07-10, 15:48
love this build ,, theres no messing around at this rate it will be done in no time :D

nikkisixx69
12-07-10, 15:50
yeah man, i read if the engine is too far forward it can be a little too top heavy, but the engine being pushed back should sort that out no bother!

what kinda power you hopin to get it puttin out??

p.s whos the chick in your avatar, me likey haha:D

ger15
12-07-10, 15:51
Is it going to be a full on track car brendan or a road/track car ?

Kruizer
12-07-10, 16:15
Is it going to be a full on track car brendan or a road/track car ?

Dunno dude, just gonna see how its goes but I've every intention of thrashing it so more than likely a track car.


yeah man, i read if the engine is too far forward it can be a little too top heavy, but the engine being pushed back should sort that out no bother!

what kinda power you hopin to get it puttin out??

p.s whos the chick in your avatar, me likey haha:D

Not to mention give the room for the v-mount, only problem is I'll have to be pushed back with it as the engine and getrag box ain't the shortest combination LoL

Aim is 600bhp plus NOS.

For shame fella, its Kat Von D ;)


love this build ,, theres no messing around at this rate it will be done in no time :D

Buy my mini or coltand it'll be done quicker LoL :p


savage dude! gona be epic when its all together!

Will try my best to make it the most extreme car I've ever built...

Mick K
12-07-10, 16:27
Speachless :/

Prodrifter86
12-07-10, 16:36
:eek::eek::eek::eek: i like big time!!!!!!!!!!!!!

bart
12-07-10, 16:37
glad to help ted......
and should be called NUTCASE JZ86
great project

Kruizer
12-07-10, 16:53
Speachless :/

I'd say thats a first you didn't have an opinion on something LoL :cool:


:eek::eek::eek::eek: i like big time!!!!!!!!!!!!!

Cheers :)


glad to help ted......
and should be called NUTCASE JZ86
great project

Ah thats just I'm good at packing ;)

bnollie
12-07-10, 16:55
Sick project lad

This thing will be unreal cant wait to see it finished

Aidan Hogan
12-07-10, 17:39
Ehhhhhh..........WOW :eek::eek::eek::eek:

SPUNKYMUNKY
12-07-10, 19:14
Sweet man, cant wait to see it at the end.. :D :D :D

Kruizer
12-07-10, 19:46
Sick project lad

This thing will be unreal cant wait to see it finished

Cheers man, should make fo a head scratcher :)


Ehhhhhh..........WOW :eek::eek::eek::eek:

Thanks Aidan (Twice;))


Sweet man, cant wait to see it at the end.. :D :D :D

Give us a chance, I'v only started it LoL

pole drift
12-07-10, 20:14
i always love your builds, espically the evo colt

Aidan Hogan
12-07-10, 20:26
Thanks Aidan (Twice;))



Your welcome , your welcome :D

SRray
12-07-10, 20:34
will be keeping an eye on this brendan,to say its fabrication hungry would be an understatement to say the least but you seem to have the right people on board;)

carpo
12-07-10, 20:41
This is goin to be epic..:D 1jz in a ae86 is gonna be scary but lots of fun..
get it finished fast so i can bring it for a spin:p

Kruizer
12-07-10, 20:49
i always love your builds, espically the evo colt

Cheers dude, colt will be at the CAPS show in 2 weeks finished in Y56 yellow, 4wd and ready for sale LoL


Your welcome , your welcome :D

:D:D


will be keeping an eye on this brendan,to say its fabrication hungry would be an understatement to say the least but you seem to have the right people on board;)

Thats true man, getting this bitch together is gonna be painful but worth it in the end hopefully... Thankfully I have some great friends :D Would you believe I took a welding course just so I could work on this going forward LoL


This is goin to be epic..:D 1jz in a ae86 is gonna be scary but lots of fun..
get it finished fast so i can bring it for a spin:p

Spin ? What you taking about Willis, your gonna be one of the unlucky fuckers teaching me how to handle this Devil LoL Will be onto you within the next month for more bits !

To add folks I would highly recommend Christy, top bloke to deal with.

slammedmind
12-07-10, 20:59
Very cool concept bren, Youre some boy for the projects, i can see this one being the best of them all when its finished

greenmachine
12-07-10, 21:20
Few parts from my old drift cam there in the pics..

Definately going to be a savage car now.. Lol..

Lot of work going into it.

Kruizer
12-07-10, 21:35
Very cool concept bren, Youre some boy for the projects, i can see this one being the best of them all when its finished

Plan is to sell all the others to fund this one build... Anyone want a Mini, Evo Colt, RX7 ? Lmao


Few parts from my old drift cam there in the pics..

Definately going to be a savage car now.. Lol..

Lot of work going into it.

Don't you mean your parked cam:D:p:D Couldn't resist ;)

Cheers lad...

Alot more to come !

greenmachine
12-07-10, 21:48
Plan is to sell all the others to fund this one build... Anyone want a Mini, Evo Colt, RX7 ? Lmao


Don't you mean your parked cam:D:p:D Couldn't resist ;)

Cheers lad...

Alot more to come !


Yeh parked cam Lol, got used and abused on those "private roads" in listowel though when I had it :o

Still got the Evo colt?

Kruizer
12-07-10, 21:51
No doubt...

Ya it'll be at Sleek FX in 2 weeks LoL

Robbie Daly Ps13
12-07-10, 21:53
Im 1 of those lads whos saying wtf are ya putting a jz in a cam for......! lol.......! At least your building it right and it should be a deamon to go......! Not sure bout handling doh......! You planning on sitting the engine back into the bulk head a bit......! Best of luck with the rest your heading in the right direction neway......! Good work......!

Jay Rockett
13-07-10, 00:46
You dont do things by half anyway do ya?! 600+ bhp in a Corolla??:eek:

Cant wait to see it, keep us posted!

docco86
13-07-10, 07:42
serious build.... holey smoke....

pole drift
13-07-10, 07:53
The power to weight ratio of this car will be savage, it would be like strapping a rocket to my grany's wheelchair!!!!!!!

Kruizer
13-07-10, 12:13
Im 1 of those lads whos saying wtf are ya putting a jz in a cam for......! lol.......! At least your building it right and it should be a deamon to go......! Not sure bout handling doh......! You planning on sitting the engine back into the bulk head a bit......! Best of luck with the rest your heading in the right direction neway......! Good work......!

Thats cause your a sissy virgin, now do an engine conversion :p Ya I'll be moving the engine back through the bulkhead, the work on the shell so far is only to protect the shell from rot.


You dont do things by half anyway do ya?! 600+ bhp in a Corolla??:eek:

Cant wait to see it, keep us posted!

600bhp is the base figure, having seen Carpo's build I know what is possible and want to push it to the end, I will be adding NOS on top to have the most power per tonne within my budget.


serious build.... holey smoke....

Lots of holy smoke hopefully :D


The power to weight ratio of this car will be savage, it would be like strapping a rocket to my grany's wheelchair!!!!!!!

Thats the plan, if I added 200bhp shot of NOS that would make it 1000bhp per tonne if I hit my goal weight of 800kg's however I haven't a clue what weight I'm gonna end up with...

pole drift
13-07-10, 12:22
are you gonna check the weight of d car wen its a bare shell or wen its fully built???

Quealy
13-07-10, 12:25
This is savage. Some nice work going on. Would you not say that the power your aiming for is a bit of overkill? Youd need tyres at least twice as wide to put it on the ground!

Mick K
13-07-10, 12:26
600hp in an 86 wont be much use to drift as you wont get grip!!!
Alan couldnt run his at 400 and had it turned down due to not being able to lay the power down!

Kruizer
13-07-10, 12:32
are you gonna check the weight of d car wen its a bare shell or wen its fully built???

Power to weight is measured on finished article so it'll be weighed on the dock road when its copletely finished. Must source som nice Bride's next...


This is savage. Some nice work going on. Would you not say that the power your aiming for is a bit of overkill? Youd need tyres at least twice as wide to put it on the ground!

Was thinking about that however I'm send the front wheels back to Image to increase them from 7.5" to 11" for the rear. I'll answer the power thing in reply to Mick.


600hp in an 86 wont be much use to drift as you wont get grip!!!
Alan couldnt run his at 400 and had it turned down due to not being able to lay the power down!

I'll be running a Motec and will have two maps on the engine and no better man than Robbie to give me a max power map and a track suitable map, I'm building the car to suit myself fella so as I said its very early days yet, standard engine / turbo should be good for 400bhp but mine will be heavier than Alan's more than likely. Must ask him what weight his came in at actually...

Quealy
13-07-10, 12:38
Good call with the rear wheels! Id say the only way to make this car epic is to sit the engine right in beside you in the cabin, get as much weight on the back end as possible. What turbo are you thinking of running? Will lag not be an issue?

Mick K
13-07-10, 12:43
Just I'd imagine it'll be very nose heavy and with the lack of weight in an 86 up the back I still doubt even 11j will keep enough contact with the tar!

Kruizer
13-07-10, 12:46
Good call with the rear wheels! Id say the only way to make this car epic is to sit the engine right in beside you in the cabin, get as much weight on the back end as possible. What turbo are you thinking of running? Will lag not be an issue?

That is the plan, I hav seen tuners use NOS to compensate for laggy builds to as to get it to the power band quicker and thats the only reason I'm including it along with running anti-lag the issue will hopefully be sorted...


Just I'd imagine it'll be very nose heavy and with the lack of weight in an 86 up the back I still doubt even 11j will keep enough contact with the tar!

Aye fella but its all trial and error with this build, believe me, can of worms is an understatement but the easy route wouldn't be half as much fun:rolleyes:

Mick K
13-07-10, 12:48
Dont get me wrong,Following your wacky projects for years,
and I LOVE this one!
Just would hate for it to be overkill,Genuinely hope it works as its gonna blow any 86 in the world out of the water!


Has Twinky not complained about you commiting mortal sin yet?

Quealy
13-07-10, 12:52
Has Twinky not complained about you commiting mortal sin yet?

He's probably been off chopping up his laptop with a spoon since he seen this thread!

Kruizer
13-07-10, 12:53
Dont get me wrong,Following your wacky projects for years,
and I LOVE this one!
Just would hate for it to be overkill,Genuinely hope it works as its gonna blow any 86 in the world out of the water!


Has Twinky not complained about you commiting mortal sin yet?

I like being wacky, its what I'm good at mate :D I'm actually going out to finish off bits on the evo colt now in a min LooL

That would be great but doubtful, there is way better out there than mine...

Not yet suprisingly, lovin the sig too btw Lmao...


He's probably been off chopping up his laptop with a spoon since he seen this thread!
:D

Kruizer
20-08-10, 18:18
The long wait is over and finally the last of the lightweight panels arrived, a set of fibreglass wings from Mr Bell. Happy days now all I need for the body is lights up front and a windscreen... Back to saving for my gearbox :(

http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0238.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0239.jpg
http://i628.photobucket.com/albums/uu5/Kruizer_666/ADC%20HQ%20RR%20Day/AE86%202010%20Project/0240.jpg

200sx
20-08-10, 18:53
sounds coooooooola,would be crazy if done right,but i think there is alot off things going against you it will end in disaster imo....best off luck with it anyway,it will be intresting,il be watching :D

Kruizer
20-08-10, 19:14
Like whats against me dude ? Any negative's you can see that I can't are welcome cause I want to make it epic ;)

200sx
20-08-10, 19:29
Like whats against me dude ? Any negative's you can see that I can't are welcome cause I want to make it epic ;)the obviouse,weight off the car,weight off the engine,i have read a few off these builds as im sure you did yourself,even with 11'' on the back,i dought it will get grip down for the power,that engine is very heavy,it will be very nose heavy and handle like shit,its all and well building these things,but they have 2 serve a purpose aswell,these are just 2 that came 2 mind when i read that tread from other builds i have read on the net!!

twailbait
20-08-10, 19:29
Overkill is under-rated:cool:

Kruizer
20-08-10, 19:34
the obviouse,weight off the car,weight off the engine,i have read a few off these builds as im sure you did yourself,even with 11'' on the back,i dought it will get grip down for the power,that engine is very heavy,it will be very nose heavy and handle like shit,its all and well building these things,but they have 2 serve a purpose aswell,these are just 2 that came 2 mind when i read that tread from other builds i have read on the net!!

The weight of the car v engine is why the engine is being moved back through the bulkhead and also there will alot of development with the suspension, as I was saying before I will have 2 maps, one for the wow its got what factor and a map that can be used and enjoyed, I know this will either be epic good or bad and no in between but I haven't set out to fail so we'll just have to see how goes on the road / track ;) Wish me luck ha, ha, ha


Overkill is under-rated:cool:

Laughing my fucking ass off lad....

Baz_180
20-08-10, 19:36
I kinda admire you for doing this project, was only thinking awhile ago why no one has attempted this conversion. By the looks of this and previous builds you don't do anything by halves and this looks well organised project. I hope you have something special planned for the suspension to be able to handle this beast. Besta luck with it! :)

200sx
20-08-10, 19:38
[QUOTE=Kruizer;153562]The weight of the car v engine is why the engine is being moved back through the bulkhead and also there will alot of development with the suspension, as I was saying before I will have 2 maps, one for the wow its got what factor and a map that can be used and enjoyed, I know this will either be epic good or bad and no in between but I haven't set out to fail so we'll just have to see how goes on the road / track ;) Wish me luck ha, ha, ha



engine going back throught he bulk head??i missed that part,i wiss you luck man ha :)

Kruizer
20-08-10, 20:00
I kinda admire you for doing this project, was only thinking awhile ago why no one has attempted this conversion. By the looks of this and previous builds you don't do anything by halves and this looks well organised project. I hope you have something special planned for the suspension to be able to handle this beast. Besta luck with it! :)

Suspension will be tricky, too hard and it will spin wheels like a go-kart on nitrous and too soft and I'll be doing a remark of the end race from the Fast and The Furious LoL Using all Supra bits should keep reliability in check...


engine going back throught he bulk head??i missed that part,i wiss you luck man ha :)

Ya lad as I want to run a v-mount set up so probably a minimum of 4 inches LoL

pepsterx
20-08-10, 20:27
gee lad best of luck with the build and fair balls, don't mind them lads i'm sure they would all love to do something as mad as this:D

raff
20-08-10, 22:21
About time someone puts a decant toyota engine in a cam!!
this looks savage so far,i really hope this works out..
Great work so far,keep it up!

RedlineKits
23-08-10, 04:11
this will be unreal when you've it done..

will you not lose rigidity by cutting through the bulkhead for the engine?

Tekno Twinky
23-08-10, 09:46
Ha thisll be interesting to say the least! imlooking forward to seehow it turns out and dont mind michelle kenny blabering on about shite hes got complulsive offensive ADHD syndrome - usualy found in abused children of rape victims, dont get offended just feel for him.

and Queley- the smell of boiled ham off you luuuuuuuuuulz

Sinnot was running 15's also and they are no way as wide ae those image wheels afik..

as for the EQUIPS id sell em on dude this thing wouldnt do a lap on mondelo drifting on those equips + there week as hell compared to the image havent you got 6 image wheels?

selling any parts from the strip down?pics of car before?

ha just read over that "sinnot was.." lul :D REEEEBUILD:)

Kruizer
23-08-10, 12:48
gee lad best of luck with the build and fair balls, don't mind them lads i'm sure they would all love to do something as mad as this:D

I'm mentally challenged at the best of times dude, this just confirms it LoL


About time someone puts a decant toyota engine in a cam!!
this looks savage so far,i really hope this works out..
Great work so far,keep it up!

Cheers fella, mucho appreciato :)


this will be unreal when you've it done..

will you not lose rigidity by cutting through the bulkhead for the engine?

Thanks fella, the shell will be treated to new tubs, ridonculous cage and many other bits when she goes up to Wexican Motorsport.


Ha thisll be interesting to say the least! imlooking forward to seehow it turns out and dont mind michelle kenny blabering on about shite hes got complulsive offensive ADHD syndrome - usualy found in abused children of rape victims, dont get offended just feel for him.

and Queley- the smell of boiled ham off you luuuuuuuuuulz

Sinnot was running 15's also and they are no way as wide ae those image wheels afik..

as for the EQUIPS id sell em on dude this thing wouldnt do a lap on mondelo drifting on those equips + there week as hell compared to the image havent you got 6 image wheels?

selling any parts from the strip down?pics of car before?

ha just read over that "sinnot was.." lul :D REEEEBUILD:)

Euips were bought just cause I always wanted a set, currently on the KP61 dude, do have 6 Image rims alright lad, bought her as a complete bare shell, nothing has come off except pockets :)

Tekno Twinky
23-08-10, 12:52
Euips were bought just cause I always wanted a set, currently on the KP61 dude, do have 6 Image rims alright lad, bought her as a complete bare shell, nothing has come off except pockets :)

thats what im liking alot about the car so far it still has 86 soul!absolutly no need to be cutting the shite out of them like others do..:)

Famous jh
23-08-10, 13:02
Suspension will be tricky, too hard and it will spin wheels like a go-kart on nitrous and too soft and I'll be doing a remark of the end race from the Fast and The Furious LoL Using all Supra bits should keep reliability in check...



Ya lad as I want to run a v-mount set up so probably a minimum of 4 inches LoL

4 inches?? Waste. of. time. You'd wanna be goin at least 2 cylinders to make it worth your while lad...

Kruizer
23-08-10, 16:36
thats what im liking alot about the car so far it still has 86 soul!absolutly no need to be cutting the shite out of them like others do..:)

Eh always just do whatever pleases me as I'm sure others do LoL


4 inches?? Waste. of. time. You'd wanna be goin at least 2 cylinders to make it worth your while lad...

Imported word to note is minimum dude ;)

Kruizer
06-01-11, 21:50
I reckon I'm gonna break it folks :( Will put up prices next week when I'm back in the country, the shell is definitely for sale anyways and has had a serious amount of prep work gone into in so anyone interested pm offers...

What will not be for sale are any of the sets of wheels or redlines so if ya want anything else pm me and I will reply once I get time...

Diesel-Dick
06-01-11, 22:02
I reckon I'm gonna break it folks :( Will put up prices next week when I'm back in the country, the shell is definitely for sale anyways and has had a serious amount of prep work gone into in so anyone interested pm offers...

What will not be for sale are any of the sets of wheels or redlines so if ya want anything else pm me and I will reply once I get time...

why????????:eek:

johnbro
06-01-11, 22:26
Don't break it lad this is an epic project
Even just to prove the people wrong, who said it won't work out:D

rburns07
06-01-11, 23:40
what a project cant wait to see it done best of luck with it lad!!fair play!!

drift student
07-01-11, 20:10
I reckon I'm gonna break it folks :( Will put up prices next week when I'm back in the country, the shell is definitely for sale anyways and has had a serious amount of prep work gone into in so anyone interested pm offers...

What will not be for sale are any of the sets of wheels or redlines so if ya want anything else pm me and I will reply once I get time...


what a project cant wait to see it done best of luck with it lad!!fair play!!


clearly you didnt read this....

POC
07-01-11, 21:10
I reckon I'm gonna break it folks :( Will put up prices next week when I'm back in the country, the shell is definitely for sale anyways and has had a serious amount of prep work gone into in so anyone interested pm offers...

What will not be for sale are any of the sets of wheels or redlines so if ya want anything else pm me and I will reply once I get time...

Wheels wheels wheels!!

Kruizer
04-03-11, 20:03
I reckon I may dump the JZ idea and fit a Beams to this too, would be done much quicker and I'm not in the mood for projects taking years anymore... Have a gearbox, loom and ecu already so just an engine and a few other trick bits, maybe even the toda 2.2 high comp stroker kit, 300 ponies n/a sounds way better than an unseable jz running 500bhp...

Davie
04-03-11, 20:10
Yes, get it moving, then give it to me, thanks in advance;)

Kruizer
04-03-11, 20:19
LoL

Nah I've been thinking about this alot and it makes more sense, way cheaper too on the fabrication side of things... If I got the KP61 Beams to run 250bhp n/a and the AE86 Beams to 300bhp n/a I'd settle for that :)

Davie
04-03-11, 20:40
Do it, won't even need that much power, keep it reliable but fun