View Full Version : project WRONG fitment haha
nikkisixx69
10-06-10, 18:43
decided ill start one of these as a good few changes are happening at the mo to my car
have had this car for 4 years, started life out as a 100% standard s13 200sx,the original pictures of it are lost in time, but this is the earliest one i have, just after i fitted some rotas:rolleyes:
http://i4.bebo.com/015a/15/large/2007/08/25/12/3753591139a5374054467l.jpg
http://i4.bebo.com/015a/14/large/2007/08/25/11/3753591139a5373941825l.jpg
then i sold my old civic and bought a kit, coilovers and a few other bits
http://i4.bebo.com/037a/5/large/2007/10/27/15/3753591139a5942008405l.jpg
http://i4.bebo.com/042a/11/large/2008/04/16/20/3753591139a7469233738l.jpg
to be fair i should have just left it like that!
so it stayed like that for about 2 years until i started taking interest in cars again
bought all the shit needed for stage 2(up to 280bhp), but then one day later lost my job so the stuff is still waiting to go on (my prioritys on this car are completly wrong)
finally started makin a bit of money again so then i started buying lots of wheels:rolleyes:
bought some big ass work equips off carpo, so i then had to get arch work done, thanks to my friends brian and alan (alan opel)
http://i667.photobucket.com/albums/vv34/partyboy420420/030620101072.jpg?t=1276194676
http://i667.photobucket.com/albums/vv34/partyboy420420/030620101069.jpg?t=1276194710
http://i667.photobucket.com/albums/vv34/partyboy420420/030620101070.jpg
had to get studs replaced aswell:mad:
http://i667.photobucket.com/albums/vv34/partyboy420420/040620101077.jpg
eventually got the wheels on only to find the tires are too wide , so hopefully ill be swapping them this weekend)
but here are a few pics of it as of today
http://i667.photobucket.com/albums/vv34/partyboy420420/100620101092.jpg?t=1276197297
http://i667.photobucket.com/albums/vv34/partyboy420420/100620101088.jpg
http://i667.photobucket.com/albums/vv34/partyboy420420/100620101089.jpg
http://i667.photobucket.com/albums/vv34/partyboy420420/100620101094.jpg?t=1276195017
http://i667.photobucket.com/albums/vv34/partyboy420420/100620101090.jpg?t=1276195147
http://i667.photobucket.com/albums/vv34/partyboy420420/100620101095.jpg?t=1276195247
http://i667.photobucket.com/albums/vv34/partyboy420420/100620101093.jpg
http://i667.photobucket.com/albums/vv34/partyboy420420/100620101097.jpg?t=1276195283
have wider front wings to go on next week and then supermade headlights
gonna space out the front wheels then more and get lower!
theres a few small jobs that need doing(retint lights, tidy engine bay) but nothing too major. plus i have no money left so everything has to be on a serious budget!
bubble1984
10-06-10, 18:50
u shud roll the rear arches a bit, nice car man
pym ya need to get yerself some wrong fitement crew stickers:cool:
its lukin crazy out in the yard, when the front is done gona look mental, need more front camber:D
nikkisixx69
10-06-10, 18:54
u shud roll the rear arches a bit, nice car man
roll fibreglass????
u shud roll the rear arches a bit, nice car man
there fiberglass how could ya roll them?
nikkisixx69
10-06-10, 18:56
pym ya need to get yerself some wrong fitement crew stickers:cool:
its lukin crazy out in the yard, when the front is done gona look mental, need more front camber:D
haha its like the exact opposite to yours! front camber needs to get sorted! dunno should i put up a spec list?
bubble1984
10-06-10, 18:57
there fiberglass how could ya roll them?
emmmmm its a joke. like haha. sorry. :D
nikkisixx69
10-06-10, 18:59
emmmmm its a joke. like haha. sorry. :D
it can be done, but it involves a bit of work, and has to be done before painting(as there is filling and heat guns involved)
put cby style bolt on arches onto the fibre galss, wider than a fookin bus then :)
kev.skyline
10-06-10, 19:14
them equips are mental looking, well played.
Administrator
10-06-10, 19:20
Some transformation! Slam the bastard though, more negative rear camber?, smaller tyres. What you got planned for the front end? Wheels?
bubble1984
10-06-10, 19:20
it can be done, but it involves a bit of work, and has to be done before painting(as there is filling and heat guns involved)
i know, ad to do it meself wit wings i got recently. lots of playing with the heatgud, lovley smell of melting fibreglass
but it was still a joke. my sincere apologies. like the front rims by the way
nikkisixx69
10-06-10, 19:21
i know, ad to do it meself wit wings i got recently. lots of playing with the heatgud, lovley smell of melting fibreglass
but it was still a joke. my sincere apologies. like the front rims by the way
dude you dont need to apologise! :D
nikkisixx69
10-06-10, 19:29
Some transformation! Slam the bastard though, more negative rear camber?, smaller tyres. What you got planned for the front end? Wheels?
i can put more neagtive rear camber on it, but the TOE goes extremely out on it, then combined with the welded diff the rear of the car feels like its floating around, which is a little scary!
i have just bought some genuine cusco toe arms which will sort the problem, but running that amount of camber will eat the inside of my messing wheel tires instantly when drifting, so i dunno if i want to! i hopefully am swapping the tires to 255s this weekend which will hopefully make a difference
for the front i think im changing the wings next week, hopefully installing the supermade headlights(if the lighting units ever arrive ggrr) ill change the wheels in the future, but i dont wanna spend too much money on it this summer as i wanna have some fun!
MEGA slammage is much needed, im finding the teins pretty shit for getting low on 18s, so i need to sort something out (remover helper springs, cut one adjuster off!)
heres how far i can go with camber
http://i667.photobucket.com/albums/vv34/partyboy420420/01022010993.jpg?t=1276198160
nick, if we take out the helper springs she'll go low dont wory:D
nikkisixx69
10-06-10, 19:40
nick, if we take out the helper springs she'll go low dont wory:D
can we just get the angle grinder to them haha
Great project thread fella, angle grinder FTL LoL
nikkisixx69
10-06-10, 19:46
Great project thread fella, angle grinder FTL LoL
thanks man, feel the project thread is a little half assed myself haha! if it wasnt for you buying that bonnet vent off me i wouldnt have been able to afford the works:D
can we just get the angle grinder to them haha
5 min job to drop back shocks ya lazy bolox:p:p
get the pic up of mine an yours wana see the height difference
Seeeeeeeeeeeeerious lookin!
Bravo chaps :D
Did you swap the Works in the end ?
nikkisixx69
10-06-10, 19:52
Did you swap the Works in the end ?
no no there the wheels on the back! i had planned to get image to make me new dishes but these came up and i couldnt say no!
looking good..them wheels look cool under it..where did you pick them up:p
Ya they look sick on her fella :D
nikkisixx69
10-06-10, 20:29
looking good..them wheels look cool under it..where did you pick them up:p
some lad who keeps sellin me wheels an makin me broke haha!:D probably wont be the last time either!:p
Fredericks Balls
10-06-10, 21:01
Fuck
me
I <3 them Works!!! Where did you say you lived again :D
The rest of the car is looking nuts too, congrats!
class car !:cool:
keep us updated
Daraghs14a
10-06-10, 22:26
some changes from the start,
well done good job
joey banana s14
10-06-10, 23:03
i apsolutly love this car looks wild 110% gets my vote well done;)
fuck me man thats mental lookin, i actually laughed when i saw how wide the rear alloys are :D class job man, how much to make wider dishes from imagin
sell me them rear wheels
me first ive the front matching pair:p
looks savage and if ya selling the back wheels let me know
ah but ive the arches to fill them,, id prob need spacers:D
joey banana s14
10-06-10, 23:16
sell me them rear wheels
theyd look unreal on yours ted:D
Jay Rockett
10-06-10, 23:16
Good work, some transformation! Should look sweet-as with the front sorted!
Could go for a smaller rear tire or slightly smaller spacer and slam it on its arse, then get that exhaust sticking out and winner winner!!!
ah but ive the arches to fill them,, id prob need spacers:D
i will next yr hopefully;)
Fredericks Balls
11-06-10, 00:05
i will next yr hopefully;)
I will in a few months :) so sell them to me :D
I will in a few months :) so sell them to me :D
wont be sold until i get something equally as tasty:p
nikkisixx69
11-06-10, 00:28
Good work, some transformation! Should look sweet-as with the front sorted!
Could go for a smaller rear tire or slightly smaller spacer and slam it on its arse, then get that exhaust sticking out and winner winner!!!
actually forgot to say that! the exhaust pipes will be getting extended too!
thanks for all the comments guys!:D
update on shit to go on!
got wider front wings, need a lil TLC, but nothing major, look like they belonged to a R.THOMPSON who competed in prodrift, or so the sticker would lead me to beleive haha
have no money to paint them so ill just spray them matt black for the moment and throw them on, ill get them painted eventually:rolleyes:
http://i667.photobucket.com/albums/vv34/partyboy420420/100620101098.jpg?t=1276215268
http://i667.photobucket.com/albums/vv34/partyboy420420/100620101099.jpg?t=1276215302
my SUPERMADE headlight pods! waiting on the lighting units to come from england(hopefully 2moro please god!)
http://i667.photobucket.com/albums/vv34/partyboy420420/100620101100.jpg?t=1276215453
http://i667.photobucket.com/albums/vv34/partyboy420420/100620101101.jpg?t=1276215486
should look like this when on!
http://img111.imageshack.us/img111/8987/180sxlightconversion2ps.jpg
a rough example:p
http://i578.photobucket.com/albums/ss223/norfydori/2009/DSC03694.jpg
nardi wheel, need money for a boss:o
http://i667.photobucket.com/albums/vv34/partyboy420420/100620101105.jpg?t=1276215912
cusco toe arms, awaiting fitting
http://i667.photobucket.com/albums/vv34/partyboy420420/100620101108.jpg?t=1276215962
t28 that is currently doing fuck all
http://i667.photobucket.com/albums/vv34/partyboy420420/100620101106.jpg?t=1276216003
greddy profec b boost controller
http://i667.photobucket.com/albums/vv34/partyboy420420/100620101112.jpg?t=1276216087
so i gots to make some more money fast!
get rid of that front bumper and try and get the same as the the car cos it wont look right man,
nikkisixx69
11-06-10, 00:42
get rid of that front bumper and try and get the same as the the car cos it wont look right man,
which one man?? these cars seem to have the sameish bumper as mine so i think it will work! but ya never no haha!
http://img475.imageshack.us/img475/3175/180sx031106ob5.jpg
http://i667.photobucket.com/albums/vv34/partyboy420420/139.jpg?t=1276216862
http://www.rimtuck.com/photos/1251613742.jpg
Prodrifter86
11-06-10, 00:45
very nice! very jap! looks great
no man get rid of it, the vents on each side are too sharp, the other bumpers are nice and clean. yours reminds me of them old delta kits :o sorry man but im a fusy fuck like that i notice the little things:D:cool:
nikkisixx69
11-06-10, 00:54
no man get rid of it, the vents on each side are too sharp, the other bumpers are nice and clean. yours reminds me of them old delta kits :o sorry man but im a fusy fuck like that i notice the little things:D:cool:
delta kit hahaha! man that takes me back, max power!! the bumper will eventually get smashed up, so a change will be in order then! i had my on a few nice bumpers! but thanks for the input man, im always welcome to it(good or bad)!:D
delta kit hahaha! man that takes me back, max power!! the bumper will eventually get smashed up, so a change will be in order then! i had my on a few nice bumpers! but thanks for the input man, im always welcome to it(good or bad)!:D
thats a good input :) canty wait for you to smash it up and put my fav one on hahahaa!!!:D hahaha ah haaaail max power days, then came fast and the furious and blew them away :) im still livin the dream:cool:
way2fastforu
11-06-10, 09:12
lookin good nick...the wide arches an equips look savage on it...cant wait to see wat its like wit the front arches on an painted.
Absolutely loving the car now. Fairplay dude. :)
unreal whells such a transformation for when you got it first....
fair dues dude
nikkisixx69
11-06-10, 10:52
lookin good nick...the wide arches an equips look savage on it...cant wait to see wat its like wit the front arches on an painted.
Absolutely loving the car now. Fairplay dude. :)
unreal whells such a transformation for when you got it first....
fair dues dude
thanks guys:D it aint done just yet tho haha!
way2fastforu
11-06-10, 10:57
hurry up an get it finished:p
nikkisixx69
11-06-10, 11:03
hurry up an get it finished:p
money is a major factor here dara!
way2fastforu
11-06-10, 13:19
rob your local bank an finish the front:D
Tekno Twinky
11-06-10, 13:41
Are you able to spin them up? damn i think id either sell them or get rivet on flares on top of the slabs! :D wiiiiide
Are you able to spin them up? damn i think id either sell them or get rivet on flares on top of the slabs! :D wiiiiide
think he should sell them to me lol
wats the widths and offsets on them btw
wrong login. alan opel is gay
nikkisixx69
11-06-10, 14:18
rob your local bank an finish the front:D
dont actually need to for most of it! just the painting of the wings is the pricey part, but im matt blacking them and sticking them on for the time being:D
Are you able to spin them up? damn i think id either sell them or get rivet on flares on top of the slabs! :D wiiiiide
havent tried yet as im swapping the tires with a lad off here for skinnier ones, but once there swapped , by god im gonna give hell and try spin em haha! anyway not too bothered, have loads of skinnier wheels for drifting!
think he should sell them to me lol
wats the widths and offsets on them btw
11.5x18 +3 offset on top of a 25mm conversion spacer which technically makes the offset -22 (if i had money id buy 5 stud hubs but i dont:()
dont actually need to for most of it! just the painting of the wings is the pricey part, but im matt blacking them and sticking them on for the time being:D
havent tried yet as im swapping the tires with a lad off here for skinnier ones, but once there swapped , by god im gonna give hell and try spin em haha! anyway not too bothered, have loads of skinnier wheels for drifting!
11.5x18 +3 offset on top of a 25mm conversion spacer which technically makes the offset -22 (if i had money id buy 5 stud hubs but i dont:()
sweet offsets
Tekno Twinky
11-06-10, 14:28
wait a minute have you still have spacers on the back?
If so get rid of them an get small er ones! for proper fitmeant!
I think he has 4 to 5 stud adapters. I could be wrong though.
Would you not just get some blue Plastikote and spray the wings with that? it'll cost the same as matt black but look a millions time better.
way2fastforu
11-06-10, 14:42
matt black ftw:D where you gettin the paint in b&c??paint is pricey enuf:(
way2fastforu
11-06-10, 14:43
I think he has 4 to 5 stud adapters. I could be wrong though.
correct..a medal for you greg;)
nikkisixx69
11-06-10, 15:24
correct greg!!! 4 to 5 stud spacers as ny budget wasnt big enough for 5 stud conversion!(work dried up suddenly so my income haved:(:()
hopefully at the end of the summer ill have enough to change but till then ill have to work with this!
right, brougt in camber, gonna fit wheels now, watch this space for an update!:D
correct..a medal for you greg;)
Send it to the usual address. Greg is always right, you all suck, c/o PO box 69. :p
way2fastforu
11-06-10, 15:39
Send it to the usual address. Greg is always right, you all suck, c/o PO box 69. :p
ha no prob expect it soon:p
keep the works anyway nick, she is looking tasty,
Il give you a shout when i get those stickers too, they will finish it off nicely :D
nikkisixx69
11-06-10, 15:56
keep the works anyway nick, she is looking tasty,
Il give you a shout when i get those stickers too, they will finish it off nicely :D
haha nice one andy, sure you will probably meet me out hammered soon enough, we can talk about it then haha
nikkisixx69
13-06-10, 00:39
right so here the pics of the camber(really didnt want to do this)
one is way more cambered that the other, what could be causing this??
http://i667.photobucket.com/albums/vv34/partyboy420420/110620101113.jpg?t=1276276318
http://i667.photobucket.com/albums/vv34/partyboy420420/110620101117.jpg?t=1276389453
http://i667.photobucket.com/albums/vv34/partyboy420420/110620101115.jpg?t=1276276534
http://i667.photobucket.com/albums/vv34/partyboy420420/110620101119.jpg?t=1276276636
http://i667.photobucket.com/albums/vv34/partyboy420420/110620101123.jpg?t=1276276697
hellaflush :P
http://i667.photobucket.com/albums/vv34/partyboy420420/110620101125.jpg?t=1276276761
on the plus side, the car did get a lil lower!
http://i667.photobucket.com/albums/vv34/partyboy420420/110620101128.jpg?t=1276276965
joey banana s14
13-06-10, 00:58
thats just ridiculous and i love it great build is all i can say well done a1
way2fastforu
13-06-10, 16:32
iv the same prob wit camber on mine nick...the camber on both wheels is matchin the other perfect but wen ya look at the driver rear wheel looks like the top is sittin in more like yours is in the pic....tis strange one.
nikkisixx69
13-06-10, 16:43
thats just ridiculous and i love it great build is all i can say well done a1
thanks man:D:D
iv the same prob wit camber on mine nick...the camber on both wheels is matchin the other perfect but wen ya look at the driver rear wheel looks like the top is sittin in more like yours is in the pic....tis strange one.
alan reckons it could be something to do with subframe bushings going or somethin?? tis a strange one dara!
Tekno Twinky
13-06-10, 16:47
The overslbs are probably different on each side..
I know an adjustable panhard rod sorts this out on an 86 but thats live rear axle
way2fastforu
13-06-10, 16:50
alan reckons it could be something to do with subframe bushings going or somethin?? tis a strange one dara!
i doubt it man cos i only put poly subframe bushes an all the other bushes in mine over xmas an still does it...ya dont notice the gap between the tyre an arch really tho
nikkisixx69
13-06-10, 16:57
The overslbs are probably different on each side..
I know an adjustable panhard rod sorts this out on an 86 but thats live rear axle
overslab haha brilliant:D
one wheel is defo cambering in more than the other!
i doubt it man cos i only put poly subframe bushes an all the other bushes in mine over xmas an still does it...ya dont notice the gap between the tyre an arch really tho
fuck, the mystery continues!
way2fastforu
13-06-10, 17:02
fuck, the mystery continues!
yup:(...only thing i can think is doin it is wat tekno said the driver fenders are bit bigger than the other which would make it look cambered more on one side
an id say its the most likely reason
nikkisixx69
17-06-10, 17:40
my headlight bulbs arrived today, will probably get round to fitting them in july haha! fully e marked too:D
there gonna fit nicely by the looks of things, the pictures just show them resting on the the pod, but when done they will be back flush with the back of the pod
http://i667.photobucket.com/albums/vv34/partyboy420420/170620101133.jpg?t=1276795784
http://i667.photobucket.com/albums/vv34/partyboy420420/170620101135.jpg?t=1276795835
http://i667.photobucket.com/albums/vv34/partyboy420420/170620101134.jpg?t=1276795872
when fitted properly
http://i578.photobucket.com/albums/ss223/norfydori/2009/DSC03586.jpg
http://i578.photobucket.com/albums/ss223/norfydori/2009/22052009375.jpg
http://i578.photobucket.com/albums/ss223/norfydori/photoshoot/3583559234_ff6af066ea_b.jpg
now onto my ongoing battle with wheel fitment
got the tires put on today (255/35/18) , but when i came back to collect them, he said he couldnt blow them up and that he would have to use a bead blaster 2moro!
when i suggested the hairspray and fire method , he said "what!!!" and he gave me a sligthly scared/concered look! he had never heard of that method before!
anyway they look like they will stretch nicely,so ill be picking up 2moro
http://i667.photobucket.com/albums/vv34/partyboy420420/170620101132.jpg
http://i667.photobucket.com/albums/vv34/partyboy420420/170620101131.jpg
and to end it all, negative offset is dead , its all about the positive !
http://i667.photobucket.com/albums/vv34/partyboy420420/120620101130.jpg
You didnt go for the 235's i see :D
nikkisixx69
17-06-10, 18:30
You didnt go for the 235's i see :D
is that what your running??? malcolm looked very worried about this whole strect busness!
he thaut 255 on his old 9.5 j's was a stretch!
way2fastforu
17-06-10, 19:16
is that what your running??? malcolm looked very worried about this whole strect busness!
you bring them to malcolm devlin to fit???
ya should leave the racing harts on the back the s13 they look way better than the equips on it:p:D
nikkisixx69
17-06-10, 19:22
you bring them to malcolm devlin to fit???
ya should leave the racing harts on the back the s13 they look way better than the equips on it:p:D
malcolm from premier! ya they rock haha
way2fastforu
17-06-10, 19:28
ah ya nevermind malcolm the only reason he worried bout the stretch on the tires is incase somethin happened an you tried to bring him to court haha
leave the racin harts on ftw:p:D
is that what your running??? malcolm looked very worried about this whole strect busness!
I'm running 245's but on a 12 inch wheel :D
Is it malcolm thats fitting them???
nikkisixx69
17-06-10, 22:37
I'm running 245's but on a 12 inch wheel :D
Is it malcolm thats fitting them???
Ya it is haha!
nikkisixx69
24-06-10, 18:34
tires stretched on, photos dont really do it justice
http://i667.photobucket.com/albums/vv34/partyboy420420/190620101137.jpg?t=1277404136
http://i667.photobucket.com/albums/vv34/partyboy420420/190620101138.jpg?t=1277404176
toe arms on! corrected the toe because it was so badly out the car was all over the road, scary stuff!
http://i667.photobucket.com/albums/vv34/partyboy420420/240620101141.jpg?t=1277404204
managed to get the car lower too:D front camber has gone all gay tho:(
http://i667.photobucket.com/albums/vv34/partyboy420420/240620101142.jpg?t=1277404295
car needs a wash badly!
http://i667.photobucket.com/albums/vv34/partyboy420420/240620101144.jpg?t=1277404372
http://i667.photobucket.com/albums/vv34/partyboy420420/240620101143.jpg?t=1277404420
next up
fit supermades
paint rivets
retint rear lights
fit front wings
make more money
lookin good pym, ya cheeky devil a heard ya choku dori up the road ya bolox clutch handlin them wheels no bother:p!
looks cool lad :cool:
what width rim an tyre is it?? 10j and 215 ??
nikkisixx69
24-06-10, 18:51
looks cool lad :cool:
what width rim an tyre is it?? 10j and 215 ??
11.5J with a 255/35 tire!
@alan opel, i had to! had to test the rear for stress factors :p go on the CA! think i left 2 big dirty black lines out side your house:D
11.5J with a 255/35 tire!
@alan opel, i had to! had to test the rear for stress factors :p go on the CA! think i left 2 big dirty black lines out side your house:D
haha nice, adding to the many already there! :cool:
markandrews
24-06-10, 19:09
Looks well love the wheels
She's come a long way from standardness.. Fair play to ya..
nikkisixx69
24-06-10, 20:21
She's come a long way from standardness.. Fair play to ya..
cheers man! its taken a long time to aswell haha
way2fastforu
24-06-10, 20:32
looks cool sittin low wit the equips nick:D
rear looks amazing!!
something is very off with the fronts though. i think its the positive camber...whats up with that? did u crash it?!
nikkisixx69
24-06-10, 23:01
rear looks amazing!!
something is very off with the fronts though. i think its the positive camber...whats up with that? did u crash it?!
no ive never crashed it haha! yeah the front camber has gone gay on me!
it happenened before when i lowered it to the floor on the rotas, so i fixed the problem with some top mount camber adjusting things, but the car has gotten lower again and its happened yet again so i reckon i need to get some front camber arms!
anyone got any budget solutions??
Fredericks Balls
25-06-10, 07:14
no ive never crashed it haha! yeah the front camber has gone gay on me!
it happenened before when i lowered it to the floor on the rotas, so i fixed the problem with some top mount camber adjusting things, but the car has gotten lower again and its happened yet again so i reckon i need to get some front camber arms!
anyone got any budget solutions??
Budget options yes I have a few. The rear looks shite, I reckon it's the wheels. Sell them to me and that will give you a few quid to sort out the front.
:p
f00king looks awesome man! Dunno how to sort the front though. Will it be wider at the front??
some camber arms, spacers, and ta daaaaa. back looks so wide compared to the front, will be unreal when sortamified!
nikkisixx69
25-06-10, 11:29
Budget options yes I have a few. The rear looks shite, I reckon it's the wheels. Sell them to me and that will give you a few quid to sort out the front.
:p
f00king looks awesome man! Dunno how to sort the front though. Will it be wider at the front??
got the wider wings waiting to go on! ill get them on when the spacer situation gets sorted! the wheels may go up for sale before next summer, as i wanna go live in cali!:D
some camber arms, spacers, and ta daaaaa. back looks so wide compared to the front, will be unreal when sortamified!
i no, its a ghetto bootied bitch at the mo! have adjustable top mounts but i reckon there shit compared to other ones availible(the proof is in the picture:p)
anyone no where i can get replacement screw on studs for 4 to 5 stud spacers????
wow the back wheels are amazing !! love what youv done with the car ,, its not to over the top but still very jap looking , love it .
im kinda new here can i ask if your a girl or a dude ???
Nikki, Nikkisixx is is a girl. An ugly one though which is why nobody tries to chat her up. She won't mind me calling her ugly because we dated before and are still good friends. :)
Nikki, Nikkisixx is is a girl. An ugly one though which is why nobody tries to chat her up. She won't mind me calling her ugly because we dated before and are still good friends. :)
nikkisixx69 is a dude i tired haha an failed... named after the dude outta kiss.. his ma is a big fan LOL :p
nikkisixx69
25-06-10, 13:39
Nikki, Nikkisixx is is a girl. An ugly one though which is why nobody tries to chat her up. She won't mind me calling her ugly because we dated before and are still good friends. :)
hahaha, maybe its my penis that freaks out the guys:p
nikkisixx69 is a dude i tired haha an failed... named after the dude outta kiss.. his ma is a big fan LOL :p
you never had a chance with me:p
correction, named after the dude from motley crue, a much better band :D haha ma is not a fan of the old motley crue:p
maybe i should put in my sig that im a guy haha
yeah dude it would save alot of confusion guy or girl you decide!!...
on topic... SERIOUS WHEELS I LOVE EM
Seen this on my way from galway towards gort..... serious serious road presence!
nikkisixx69
28-06-10, 17:54
Seen this on my way from galway towards gort..... serious serious road presence!
haha cheers man, im only glad it stays on the road,handling is all over the place at the mo! what where ya driving, mighta seen ya?
haha cheers man, im only glad it stays on the road,handling is all over the place at the mo! what where ya driving, mighta seen ya?
Red gt4 celica
Sounds evil too
chriskeogh
30-06-10, 20:31
Ha ha yes i love the wheels! haha
Really cool car!!
Wheels are the business!!
very nice car!!
will ya giv it to me?? haha
had to test the rear for stress factors
Haha,epic Fear and Loathing quote!! ;)
nikkisixx69
07-07-10, 14:41
Haha,epic Fear and Loathing quote!! ;)
haha correct! well spotted sir!
haha correct! well spotted sir!
I can near quote the movie word for word,was hard not to spot it. Dr.Thompson was a legend RIP!
nikkisixx69
07-07-10, 15:02
I can near quote the movie word for word,was hard not to spot it. Dr.Thompson was a legend RIP!
fact! i must have watched that movie over 100 times!
fact! i must have watched that movie over 100 times!
I dare say u were clear minded very few of them times ;) haha
Nikki, Nikkisixx is is a girl. An ugly one though which is why nobody tries to chat her up. She won't mind me calling her ugly because we dated before and are still good friends. :)
ha ha ok greg im all the wiser now cheers :p
nikkisixx69
07-07-10, 18:39
nothin really happenin to the car this week, next week ill make a start on some new stuff, until then my bro took a cool "arty" shot today!:D
http://i14.photobucket.com/albums/a322/Madmat4x4/07-07-10/P7071274-1.jpg
my camber haha
http://i14.photobucket.com/albums/a322/Madmat4x4/07-07-10/P7071279.jpg
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.