project WRONG fitment haha [Archive]

nikkisixx69

10-06-10, 18:43

decided ill start one of these as a good few changes are happening at the mo to my car

have had this car for 4 years, started life out as a 100% standard s13 200sx,the original pictures of it are lost in time, but this is the earliest one i have, just after i fitted some rotas:rolleyes:

http://i4.bebo.com/015a/15/large/2007/08/25/12/3753591139a5374054467l.jpg

http://i4.bebo.com/015a/14/large/2007/08/25/11/3753591139a5373941825l.jpg

then i sold my old civic and bought a kit, coilovers and a few other bits

http://i4.bebo.com/037a/5/large/2007/10/27/15/3753591139a5942008405l.jpg

http://i4.bebo.com/042a/11/large/2008/04/16/20/3753591139a7469233738l.jpg

to be fair i should have just left it like that!

so it stayed like that for about 2 years until i started taking interest in cars again

bought all the shit needed for stage 2(up to 280bhp), but then one day later lost my job so the stuff is still waiting to go on (my prioritys on this car are completly wrong)

finally started makin a bit of money again so then i started buying lots of wheels:rolleyes:

bought some big ass work equips off carpo, so i then had to get arch work done, thanks to my friends brian and alan (alan opel)

http://i667.photobucket.com/albums/vv34/partyboy420420/030620101072.jpg?t=1276194676

http://i667.photobucket.com/albums/vv34/partyboy420420/030620101069.jpg?t=1276194710

http://i667.photobucket.com/albums/vv34/partyboy420420/030620101070.jpg

had to get studs replaced aswell:mad:

http://i667.photobucket.com/albums/vv34/partyboy420420/040620101077.jpg

eventually got the wheels on only to find the tires are too wide , so hopefully ill be swapping them this weekend)

but here are a few pics of it as of today

http://i667.photobucket.com/albums/vv34/partyboy420420/100620101092.jpg?t=1276197297

http://i667.photobucket.com/albums/vv34/partyboy420420/100620101088.jpg

http://i667.photobucket.com/albums/vv34/partyboy420420/100620101089.jpg

http://i667.photobucket.com/albums/vv34/partyboy420420/100620101094.jpg?t=1276195017

http://i667.photobucket.com/albums/vv34/partyboy420420/100620101090.jpg?t=1276195147

http://i667.photobucket.com/albums/vv34/partyboy420420/100620101095.jpg?t=1276195247

http://i667.photobucket.com/albums/vv34/partyboy420420/100620101093.jpg

http://i667.photobucket.com/albums/vv34/partyboy420420/100620101097.jpg?t=1276195283

have wider front wings to go on next week and then supermade headlights

gonna space out the front wheels then more and get lower!

theres a few small jobs that need doing(retint lights, tidy engine bay) but nothing too major. plus i have no money left so everything has to be on a serious budget!

bubble1984

10-06-10, 18:50

u shud roll the rear arches a bit, nice car man

alan opel

10-06-10, 18:54

pym ya need to get yerself some wrong fitement crew stickers:cool:
its lukin crazy out in the yard, when the front is done gona look mental, need more front camber:D

nikkisixx69

10-06-10, 18:54

u shud roll the rear arches a bit, nice car man

roll fibreglass????

alan opel

10-06-10, 18:55

u shud roll the rear arches a bit, nice car man

there fiberglass how could ya roll them?

nikkisixx69

10-06-10, 18:56

pym ya need to get yerself some wrong fitement crew stickers:cool:
its lukin crazy out in the yard, when the front is done gona look mental, need more front camber:D

haha its like the exact opposite to yours! front camber needs to get sorted! dunno should i put up a spec list?

bubble1984

10-06-10, 18:57

there fiberglass how could ya roll them?

emmmmm its a joke. like haha. sorry. :D

nikkisixx69

10-06-10, 18:59

emmmmm its a joke. like haha. sorry. :D

it can be done, but it involves a bit of work, and has to be done before painting(as there is filling and heat guns involved)

CarlCF4

10-06-10, 19:02

put cby style bolt on arches onto the fibre galss, wider than a fookin bus then :)

kev.skyline

10-06-10, 19:14

them equips are mental looking, well played.

Administrator

10-06-10, 19:20

Some transformation! Slam the bastard though, more negative rear camber?, smaller tyres. What you got planned for the front end? Wheels?

bubble1984

10-06-10, 19:20

it can be done, but it involves a bit of work, and has to be done before painting(as there is filling and heat guns involved)

i know, ad to do it meself wit wings i got recently. lots of playing with the heatgud, lovley smell of melting fibreglass

but it was still a joke. my sincere apologies. like the front rims by the way

nikkisixx69

10-06-10, 19:21

i know, ad to do it meself wit wings i got recently. lots of playing with the heatgud, lovley smell of melting fibreglass

but it was still a joke. my sincere apologies. like the front rims by the way

dude you dont need to apologise! :D

nikkisixx69

10-06-10, 19:29

Some transformation! Slam the bastard though, more negative rear camber?, smaller tyres. What you got planned for the front end? Wheels?

i can put more neagtive rear camber on it, but the TOE goes extremely out on it, then combined with the welded diff the rear of the car feels like its floating around, which is a little scary!

i have just bought some genuine cusco toe arms which will sort the problem, but running that amount of camber will eat the inside of my messing wheel tires instantly when drifting, so i dunno if i want to! i hopefully am swapping the tires to 255s this weekend which will hopefully make a difference

for the front i think im changing the wings next week, hopefully installing the supermade headlights(if the lighting units ever arrive ggrr) ill change the wheels in the future, but i dont wanna spend too much money on it this summer as i wanna have some fun!

MEGA slammage is much needed, im finding the teins pretty shit for getting low on 18s, so i need to sort something out (remover helper springs, cut one adjuster off!)

heres how far i can go with camber

http://i667.photobucket.com/albums/vv34/partyboy420420/01022010993.jpg?t=1276198160

alan opel

10-06-10, 19:38

nick, if we take out the helper springs she'll go low dont wory:D

nikkisixx69

10-06-10, 19:40

nick, if we take out the helper springs she'll go low dont wory:D

can we just get the angle grinder to them haha

Kruizer

10-06-10, 19:44

Great project thread fella, angle grinder FTL LoL

nikkisixx69

10-06-10, 19:46

Great project thread fella, angle grinder FTL LoL

thanks man, feel the project thread is a little half assed myself haha! if it wasnt for you buying that bonnet vent off me i wouldnt have been able to afford the works:D

alan opel

10-06-10, 19:46

can we just get the angle grinder to them haha

5 min job to drop back shocks ya lazy bolox:p:p

get the pic up of mine an yours wana see the height difference

Derk

10-06-10, 19:47

Seeeeeeeeeeeeerious lookin!
Bravo chaps :D

Kruizer

10-06-10, 19:50

Did you swap the Works in the end ?

bnollie

10-06-10, 19:52

looks sick lad
love it:D

nikkisixx69

10-06-10, 19:52

Did you swap the Works in the end ?

no no there the wheels on the back! i had planned to get image to make me new dishes but these came up and i couldnt say no!

carpo

10-06-10, 20:16

looking good..them wheels look cool under it..where did you pick them up:p

Kruizer

10-06-10, 20:18

Ya they look sick on her fella :D

nikkisixx69

10-06-10, 20:29

looking good..them wheels look cool under it..where did you pick them up:p

some lad who keeps sellin me wheels an makin me broke haha!:D probably wont be the last time either!:p

Fredericks Balls

10-06-10, 21:01

Fuck

me

I <3 them Works!!! Where did you say you lived again :D

The rest of the car is looking nuts too, congrats!

raff

10-06-10, 21:04

Car is awesome!!!

bohs

10-06-10, 21:31

class car !:cool:
keep us updated

Daraghs14a

10-06-10, 22:26

some changes from the start,
well done good job

joey banana s14

10-06-10, 23:03

i apsolutly love this car looks wild 110% gets my vote well done;)

yowdy

10-06-10, 23:08

sell me them rear wheels

m-sykes

10-06-10, 23:13

fuck me man thats mental lookin, i actually laughed when i saw how wide the rear alloys are :D class job man, how much to make wider dishes from imagin

podge

10-06-10, 23:14

sell me them rear wheels

me first ive the front matching pair:p
looks savage and if ya selling the back wheels let me know

yowdy

10-06-10, 23:15

ah but ive the arches to fill them,, id prob need spacers:D

joey banana s14

10-06-10, 23:16

sell me them rear wheels

theyd look unreal on yours ted:D

Jay Rockett

10-06-10, 23:16

podge

10-06-10, 23:26

ah but ive the arches to fill them,, id prob need spacers:D

i will next yr hopefully;)

Fredericks Balls

11-06-10, 00:05

i will next yr hopefully;)

I will in a few months :) so sell them to me :D

podge

11-06-10, 00:08

I will in a few months :) so sell them to me :D

wont be sold until i get something equally as tasty:p

nikkisixx69

11-06-10, 00:28

Good work, some transformation! Should look sweet-as with the front sorted!

Could go for a smaller rear tire or slightly smaller spacer and slam it on its arse, then get that exhaust sticking out and winner winner!!!

actually forgot to say that! the exhaust pipes will be getting extended too!

thanks for all the comments guys!:D

update on shit to go on!

got wider front wings, need a lil TLC, but nothing major, look like they belonged to a R.THOMPSON who competed in prodrift, or so the sticker would lead me to beleive haha

have no money to paint them so ill just spray them matt black for the moment and throw them on, ill get them painted eventually:rolleyes:

http://i667.photobucket.com/albums/vv34/partyboy420420/100620101098.jpg?t=1276215268

http://i667.photobucket.com/albums/vv34/partyboy420420/100620101099.jpg?t=1276215302

my SUPERMADE headlight pods! waiting on the lighting units to come from england(hopefully 2moro please god!)
http://i667.photobucket.com/albums/vv34/partyboy420420/100620101100.jpg?t=1276215453

http://i667.photobucket.com/albums/vv34/partyboy420420/100620101101.jpg?t=1276215486

should look like this when on!

http://img111.imageshack.us/img111/8987/180sxlightconversion2ps.jpg

a rough example:p
http://i578.photobucket.com/albums/ss223/norfydori/2009/DSC03694.jpg

nardi wheel, need money for a boss:o

http://i667.photobucket.com/albums/vv34/partyboy420420/100620101105.jpg?t=1276215912

cusco toe arms, awaiting fitting

http://i667.photobucket.com/albums/vv34/partyboy420420/100620101108.jpg?t=1276215962

t28 that is currently doing fuck all

http://i667.photobucket.com/albums/vv34/partyboy420420/100620101106.jpg?t=1276216003

greddy profec b boost controller

http://i667.photobucket.com/albums/vv34/partyboy420420/100620101112.jpg?t=1276216087

so i gots to make some more money fast!

m-sykes

11-06-10, 00:32

get rid of that front bumper and try and get the same as the the car cos it wont look right man,

nikkisixx69

11-06-10, 00:42

get rid of that front bumper and try and get the same as the the car cos it wont look right man,

which one man?? these cars seem to have the sameish bumper as mine so i think it will work! but ya never no haha!

http://img475.imageshack.us/img475/3175/180sx031106ob5.jpg

http://i667.photobucket.com/albums/vv34/partyboy420420/139.jpg?t=1276216862

http://www.rimtuck.com/photos/1251613742.jpg

Prodrifter86

11-06-10, 00:45

very nice! very jap! looks great

m-sykes

11-06-10, 00:46

nikkisixx69

11-06-10, 00:54

no man get rid of it, the vents on each side are too sharp, the other bumpers are nice and clean. yours reminds me of them old delta kits :o sorry man but im a fusy fuck like that i notice the little things:D:cool:

delta kit hahaha! man that takes me back, max power!! the bumper will eventually get smashed up, so a change will be in order then! i had my on a few nice bumpers! but thanks for the input man, im always welcome to it(good or bad)!:D

m-sykes

11-06-10, 00:56

delta kit hahaha! man that takes me back, max power!! the bumper will eventually get smashed up, so a change will be in order then! i had my on a few nice bumpers! but thanks for the input man, im always welcome to it(good or bad)!:D

thats a good input :) canty wait for you to smash it up and put my fav one on hahahaa!!!:D hahaha ah haaaail max power days, then came fast and the furious and blew them away :) im still livin the dream:cool:

way2fastforu

11-06-10, 09:12

lookin good nick...the wide arches an equips look savage on it...cant wait to see wat its like wit the front arches on an painted.

Greg

11-06-10, 10:35

Absolutely loving the car now. Fairplay dude. :)

jaycono

11-06-10, 10:45

unreal whells such a transformation for when you got it first....

fair dues dude

nikkisixx69

11-06-10, 10:52

lookin good nick...the wide arches an equips look savage on it...cant wait to see wat its like wit the front arches on an painted.

Absolutely loving the car now. Fairplay dude. :)

unreal whells such a transformation for when you got it first....

fair dues dude

thanks guys:D it aint done just yet tho haha!

way2fastforu

11-06-10, 10:57

hurry up an get it finished:p

nikkisixx69

11-06-10, 11:03

hurry up an get it finished:p

money is a major factor here dara!

way2fastforu

11-06-10, 13:19

rob your local bank an finish the front:D

Tekno Twinky

11-06-10, 13:41

Are you able to spin them up? damn i think id either sell them or get rivet on flares on top of the slabs! :D wiiiiide

podge

11-06-10, 14:06

Are you able to spin them up? damn i think id either sell them or get rivet on flares on top of the slabs! :D wiiiiide

think he should sell them to me lol
wats the widths and offsets on them btw

alan opel

11-06-10, 14:16

wrong login. alan opel is gay

nikkisixx69

11-06-10, 14:18

rob your local bank an finish the front:D

dont actually need to for most of it! just the painting of the wings is the pricey part, but im matt blacking them and sticking them on for the time being:D

Are you able to spin them up? damn i think id either sell them or get rivet on flares on top of the slabs! :D wiiiiide

havent tried yet as im swapping the tires with a lad off here for skinnier ones, but once there swapped , by god im gonna give hell and try spin em haha! anyway not too bothered, have loads of skinnier wheels for drifting!

think he should sell them to me lol
wats the widths and offsets on them btw

11.5x18 +3 offset on top of a 25mm conversion spacer which technically makes the offset -22 (if i had money id buy 5 stud hubs but i dont:()

podge

11-06-10, 14:21

dont actually need to for most of it! just the painting of the wings is the pricey part, but im matt blacking them and sticking them on for the time being:D

havent tried yet as im swapping the tires with a lad off here for skinnier ones, but once there swapped , by god im gonna give hell and try spin em haha! anyway not too bothered, have loads of skinnier wheels for drifting!

11.5x18 +3 offset on top of a 25mm conversion spacer which technically makes the offset -22 (if i had money id buy 5 stud hubs but i dont:()

sweet offsets

Tekno Twinky

11-06-10, 14:28

wait a minute have you still have spacers on the back?

If so get rid of them an get small er ones! for proper fitmeant!

Greg

11-06-10, 14:41

I think he has 4 to 5 stud adapters. I could be wrong though.

Would you not just get some blue Plastikote and spray the wings with that? it'll cost the same as matt black but look a millions time better.

way2fastforu

11-06-10, 14:42

matt black ftw:D where you gettin the paint in b&c??paint is pricey enuf:(

way2fastforu

11-06-10, 14:43

I think he has 4 to 5 stud adapters. I could be wrong though.

correct..a medal for you greg;)

nikkisixx69

11-06-10, 15:24

correct greg!!! 4 to 5 stud spacers as ny budget wasnt big enough for 5 stud conversion!(work dried up suddenly so my income haved:(:()

hopefully at the end of the summer ill have enough to change but till then ill have to work with this!

right, brougt in camber, gonna fit wheels now, watch this space for an update!:D

Greg

11-06-10, 15:28

correct..a medal for you greg;)

Send it to the usual address. Greg is always right, you all suck, c/o PO box 69. :p

way2fastforu

11-06-10, 15:39

Send it to the usual address. Greg is always right, you all suck, c/o PO box 69. :p

ha no prob expect it soon:p

juice

11-06-10, 15:45

keep the works anyway nick, she is looking tasty,

Il give you a shout when i get those stickers too, they will finish it off nicely :D

nikkisixx69

11-06-10, 15:56

keep the works anyway nick, she is looking tasty,

Il give you a shout when i get those stickers too, they will finish it off nicely :D

haha nice one andy, sure you will probably meet me out hammered soon enough, we can talk about it then haha

nikkisixx69

13-06-10, 00:39

right so here the pics of the camber(really didnt want to do this)

one is way more cambered that the other, what could be causing this??

http://i667.photobucket.com/albums/vv34/partyboy420420/110620101113.jpg?t=1276276318

http://i667.photobucket.com/albums/vv34/partyboy420420/110620101117.jpg?t=1276389453

http://i667.photobucket.com/albums/vv34/partyboy420420/110620101115.jpg?t=1276276534

http://i667.photobucket.com/albums/vv34/partyboy420420/110620101119.jpg?t=1276276636

http://i667.photobucket.com/albums/vv34/partyboy420420/110620101123.jpg?t=1276276697

hellaflush :P

http://i667.photobucket.com/albums/vv34/partyboy420420/110620101125.jpg?t=1276276761

on the plus side, the car did get a lil lower!

http://i667.photobucket.com/albums/vv34/partyboy420420/110620101128.jpg?t=1276276965

joey banana s14

13-06-10, 00:58

thats just ridiculous and i love it great build is all i can say well done a1

way2fastforu

13-06-10, 16:32

iv the same prob wit camber on mine nick...the camber on both wheels is matchin the other perfect but wen ya look at the driver rear wheel looks like the top is sittin in more like yours is in the pic....tis strange one.

nikkisixx69

13-06-10, 16:43

thats just ridiculous and i love it great build is all i can say well done a1

thanks man:D:D

iv the same prob wit camber on mine nick...the camber on both wheels is matchin the other perfect but wen ya look at the driver rear wheel looks like the top is sittin in more like yours is in the pic....tis strange one.

alan reckons it could be something to do with subframe bushings going or somethin?? tis a strange one dara!

Tekno Twinky

13-06-10, 16:47

The overslbs are probably different on each side..

I know an adjustable panhard rod sorts this out on an 86 but thats live rear axle

way2fastforu

13-06-10, 16:50

alan reckons it could be something to do with subframe bushings going or somethin?? tis a strange one dara!

i doubt it man cos i only put poly subframe bushes an all the other bushes in mine over xmas an still does it...ya dont notice the gap between the tyre an arch really tho

nikkisixx69

13-06-10, 16:57

The overslbs are probably different on each side..

I know an adjustable panhard rod sorts this out on an 86 but thats live rear axle

overslab haha brilliant:D

one wheel is defo cambering in more than the other!

i doubt it man cos i only put poly subframe bushes an all the other bushes in mine over xmas an still does it...ya dont notice the gap between the tyre an arch really tho

fuck, the mystery continues!

way2fastforu

13-06-10, 17:02

fuck, the mystery continues!

yup:(...only thing i can think is doin it is wat tekno said the driver fenders are bit bigger than the other which would make it look cambered more on one side
an id say its the most likely reason

nikkisixx69

17-06-10, 17:40

my headlight bulbs arrived today, will probably get round to fitting them in july haha! fully e marked too:D

there gonna fit nicely by the looks of things, the pictures just show them resting on the the pod, but when done they will be back flush with the back of the pod

http://i667.photobucket.com/albums/vv34/partyboy420420/170620101133.jpg?t=1276795784

http://i667.photobucket.com/albums/vv34/partyboy420420/170620101135.jpg?t=1276795835

http://i667.photobucket.com/albums/vv34/partyboy420420/170620101134.jpg?t=1276795872

when fitted properly

http://i578.photobucket.com/albums/ss223/norfydori/2009/DSC03586.jpg

http://i578.photobucket.com/albums/ss223/norfydori/2009/22052009375.jpg

http://i578.photobucket.com/albums/ss223/norfydori/photoshoot/3583559234_ff6af066ea_b.jpg

now onto my ongoing battle with wheel fitment

got the tires put on today (255/35/18) , but when i came back to collect them, he said he couldnt blow them up and that he would have to use a bead blaster 2moro!

when i suggested the hairspray and fire method , he said "what!!!" and he gave me a sligthly scared/concered look! he had never heard of that method before!

anyway they look like they will stretch nicely,so ill be picking up 2moro

http://i667.photobucket.com/albums/vv34/partyboy420420/170620101132.jpg

http://i667.photobucket.com/albums/vv34/partyboy420420/170620101131.jpg

and to end it all, negative offset is dead , its all about the positive !

http://i667.photobucket.com/albums/vv34/partyboy420420/120620101130.jpg

juice

17-06-10, 18:15

You didnt go for the 235's i see :D

nikkisixx69

17-06-10, 18:30

You didnt go for the 235's i see :D

is that what your running??? malcolm looked very worried about this whole strect busness!

alan opel

17-06-10, 18:31

he thaut 255 on his old 9.5 j's was a stretch!

way2fastforu

17-06-10, 19:16

is that what your running??? malcolm looked very worried about this whole strect busness!

you bring them to malcolm devlin to fit???
ya should leave the racing harts on the back the s13 they look way better than the equips on it:p:D

nikkisixx69

17-06-10, 19:22

you bring them to malcolm devlin to fit???
ya should leave the racing harts on the back the s13 they look way better than the equips on it:p:D

malcolm from premier! ya they rock haha

way2fastforu

17-06-10, 19:28

ah ya nevermind malcolm the only reason he worried bout the stretch on the tires is incase somethin happened an you tried to bring him to court haha

leave the racin harts on ftw:p:D

juice

17-06-10, 19:45

is that what your running??? malcolm looked very worried about this whole strect busness!

I'm running 245's but on a 12 inch wheel :D

Is it malcolm thats fitting them???

nikkisixx69

17-06-10, 22:37

I'm running 245's but on a 12 inch wheel :D

Is it malcolm thats fitting them???

Ya it is haha!

nikkisixx69

24-06-10, 18:34

tires stretched on, photos dont really do it justice

http://i667.photobucket.com/albums/vv34/partyboy420420/190620101137.jpg?t=1277404136

http://i667.photobucket.com/albums/vv34/partyboy420420/190620101138.jpg?t=1277404176

toe arms on! corrected the toe because it was so badly out the car was all over the road, scary stuff!

http://i667.photobucket.com/albums/vv34/partyboy420420/240620101141.jpg?t=1277404204

managed to get the car lower too:D front camber has gone all gay tho:(

http://i667.photobucket.com/albums/vv34/partyboy420420/240620101142.jpg?t=1277404295

car needs a wash badly!

http://i667.photobucket.com/albums/vv34/partyboy420420/240620101144.jpg?t=1277404372

http://i667.photobucket.com/albums/vv34/partyboy420420/240620101143.jpg?t=1277404420

next up

fit supermades

paint rivets

retint rear lights

fit front wings

make more money

alan opel

24-06-10, 18:39

lookin good pym, ya cheeky devil a heard ya choku dori up the road ya bolox clutch handlin them wheels no bother:p!

NIALL JZX

24-06-10, 18:48

looks cool lad :cool:

what width rim an tyre is it?? 10j and 215 ??

nikkisixx69

24-06-10, 18:51

looks cool lad :cool:

what width rim an tyre is it?? 10j and 215 ??

11.5J with a 255/35 tire!

@alan opel, i had to! had to test the rear for stress factors :p go on the CA! think i left 2 big dirty black lines out side your house:D

alan opel

24-06-10, 18:59

11.5J with a 255/35 tire!

@alan opel, i had to! had to test the rear for stress factors :p go on the CA! think i left 2 big dirty black lines out side your house:D

haha nice, adding to the many already there! :cool:

markandrews

24-06-10, 19:09

Looks well love the wheels

Doofer

24-06-10, 20:19

She's come a long way from standardness.. Fair play to ya..

nikkisixx69

24-06-10, 20:21

She's come a long way from standardness.. Fair play to ya..

cheers man! its taken a long time to aswell haha

way2fastforu

24-06-10, 20:32

looks cool sittin low wit the equips nick:D

PeterT

24-06-10, 22:55

rear looks amazing!!

something is very off with the fronts though. i think its the positive camber...whats up with that? did u crash it?!

nikkisixx69

24-06-10, 23:01

rear looks amazing!!

something is very off with the fronts though. i think its the positive camber...whats up with that? did u crash it?!

no ive never crashed it haha! yeah the front camber has gone gay on me!

it happenened before when i lowered it to the floor on the rotas, so i fixed the problem with some top mount camber adjusting things, but the car has gotten lower again and its happened yet again so i reckon i need to get some front camber arms!

anyone got any budget solutions??

Fredericks Balls

25-06-10, 07:14

no ive never crashed it haha! yeah the front camber has gone gay on me!

it happenened before when i lowered it to the floor on the rotas, so i fixed the problem with some top mount camber adjusting things, but the car has gotten lower again and its happened yet again so i reckon i need to get some front camber arms!

anyone got any budget solutions??

Budget options yes I have a few. The rear looks shite, I reckon it's the wheels. Sell them to me and that will give you a few quid to sort out the front.

:p
f00king looks awesome man! Dunno how to sort the front though. Will it be wider at the front??

PeterT

25-06-10, 10:33

some camber arms, spacers, and ta daaaaa. back looks so wide compared to the front, will be unreal when sortamified!

nikkisixx69

25-06-10, 11:29

Budget options yes I have a few. The rear looks shite, I reckon it's the wheels. Sell them to me and that will give you a few quid to sort out the front.

:p
f00king looks awesome man! Dunno how to sort the front though. Will it be wider at the front??

got the wider wings waiting to go on! ill get them on when the spacer situation gets sorted! the wheels may go up for sale before next summer, as i wanna go live in cali!:D

some camber arms, spacers, and ta daaaaa. back looks so wide compared to the front, will be unreal when sortamified!

i no, its a ghetto bootied bitch at the mo! have adjustable top mounts but i reckon there shit compared to other ones availible(the proof is in the picture:p)

anyone no where i can get replacement screw on studs for 4 to 5 stud spacers????

nikki

25-06-10, 12:29

wow the back wheels are amazing !! love what youv done with the car ,, its not to over the top but still very jap looking , love it .

im kinda new here can i ask if your a girl or a dude ???

Greg

25-06-10, 13:06

Nikki, Nikkisixx is is a girl. An ugly one though which is why nobody tries to chat her up. She won't mind me calling her ugly because we dated before and are still good friends. :)

jaycono

25-06-10, 13:09

Nikki, Nikkisixx is is a girl. An ugly one though which is why nobody tries to chat her up. She won't mind me calling her ugly because we dated before and are still good friends. :)

nikkisixx69 is a dude i tired haha an failed... named after the dude outta kiss.. his ma is a big fan LOL :p

nikkisixx69

25-06-10, 13:39

Nikki, Nikkisixx is is a girl. An ugly one though which is why nobody tries to chat her up. She won't mind me calling her ugly because we dated before and are still good friends. :)

hahaha, maybe its my penis that freaks out the guys:p

nikkisixx69 is a dude i tired haha an failed... named after the dude outta kiss.. his ma is a big fan LOL :p

you never had a chance with me:p

correction, named after the dude from motley crue, a much better band :D haha ma is not a fan of the old motley crue:p

maybe i should put in my sig that im a guy haha