View Full Version : project reckless s13
righto said id through up a few piccies off the latest project. the pennies are tight on this one, selling my old vectra runabout, and the funds from that are to finish this wagon. i got it cheap as the big ends were knocking, the shell is very clean, but the piantwork is shocking, laquer peelling twelve diff shade of gold and a few scrapes, but no dents thank god. the plan is paint a few bits up black, some 15" ssr's and drop it on the floor(i mean on the floor!:D) here's a few pics
http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs529.snc3/30037_1373514331019_1026612936_30966114_849364_n.j pg
http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs529.snc3/30037_1373514371020_1026612936_30966115_3927410_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs549.snc3/30037_1373514411021_1026612936_30966116_5214232_n. jpg
first job was to inspect the damage dropped the subframe a little and pulled sump off
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs509.ash1/30037_1373514451022_1026612936_30966117_5998058_n. jpg
this bearing is snapped in half!
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs549.snc3/30037_1373514731029_1026612936_30966124_8049977_n. jpg
got some spats and skirts, ended up swapping these skirts for different ones as these kouki ones i got had no front piece.
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs529.snc3/30037_1373514491023_1026612936_30966118_7102476_n. jpg
then got some rimmage :D
need a good clean but im happy with them
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs509.ash1/30037_1373514611026_1026612936_30966121_6446772_n. jpg
rears have 3 inch dish and fronts 2.5"
http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs529.snc3/30037_1373514291018_1026612936_30966113_5420813_n. jpg
then set about painting the bootlid, roof, spats, skirts, front lights and the front splitter. its not the prettiest looking but i like it!
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs509.ash1/30037_1373514531024_1026612936_30966119_8287707_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs549.snc3/30037_1373514571025_1026612936_30966120_3186865_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs529.snc3/30037_1373514651027_1026612936_30966122_7690385_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs509.ash1/30037_1373514771030_1026612936_30966125_1986333_n. jpg
next task is to get crank back, get engine back together, fit new box as the old one is crunching in 4th, get some 60mm springs and lob a coil off them witht he grinder, fit exhaust, weld diff, and she'll be good to go:D also have a volvo ic there for it, and theres a t28 on it, might get a horshem chip soon if one comes up cheap! thats it for now!
Baffle your sump while your at it man or ul be back to square one!! And get a catch tank.....cant wait to see her finished, pure slut!!
Administrator
04-05-10, 19:44
I like where this is going! Do everything black though I'd say!
there is a baffle in the sump already, but i take it thats a std one? ill try get a pic
ah doubt ill go all black, i only did it this way as i didnt want to paint all the stuff gold, trying to match colours an shit, the black was only a tenner for the two cans, and i employed nikkisixx69 off here to sand everything for some tea and biscuits!
serious tom
04-05-10, 20:27
i seen a very similar car to this in newry the other day!!
cool project but i think ya will need wider and dishier wheels to pull it off.
cool project but i think ya will need wider and dishier wheels to pull it off.
i no i wer looking for 16" ssr's for ages but settled for 15's doubt will need wider the back ones stick out a little as it is! thats before some spacers an some camber:D
yea will look cool so wen its slammed with big spacers and mucho camber.
way2fastforu
05-05-10, 09:07
lookin good alan...make sure ya slam it on them ssr's be savage:D
if you had dat bad a bearing cheack ur crank they are like butter in them,,
if you had dat bad a bearing cheack ur crank they are like butter in them,,
crank is being reground for over sized bearings:)
nikkisixx69
05-05-10, 14:54
cant wait to see this getting raped alive!!! :D
nikkisixx69
05-05-10, 14:57
cool project but i think ya will need wider and dishier wheels to pull it off.
i reckon he should reverse the 2.5 dish wheels and polish the lip up!
i reckon he should reverse the 2.5 dish wheels and polish the lip up!
aye was thinking that, an getin sum jun arches.....
would be about this much dish then..
note 15's also :D
http://i722.photobucket.com/albums/ww229/jordyadis/ps13green6.jpg
http://i722.photobucket.com/albums/ww229/jordyadis/ps13green3.jpg
good man alan, good to see you getting away from those dodgy opels, ha ha, il hopefully have a new yoke soon aswell, we will have to head out for a bit of streeto!!
way2fastforu
05-05-10, 16:29
reverse the dish alan DOOOOOOOO IT:D
good man alan, good to see you getting away from those dodgy opels, ha ha, il hopefully have a new yoke soon aswell, we will have to head out for a bit of streeto!!
juice! you were hammered in cp's last time i saw a! what ya gettin? ya sounds good, im a bit rusty with these rwd majiggers youll have to gimme a few pointers:p
reverse the dish alan DOOOOOOOO IT:D
im just tryin to work out what offset and dish thatd give me..
way2fastforu
05-05-10, 16:44
youll have to gimme a few pointers:p
clutch kick an put the boot down thats all ya need to no:D
aye was thinking that, an getin sum jun arches.....
would be about this much dish then..
note 15's also :D
http://i722.photobucket.com/albums/ww229/jordyadis/ps13green6.jpg
http://i722.photobucket.com/albums/ww229/jordyadis/ps13green3.jpg
I think, if i'm remembering rightly, that car was being broken on done deal....if not it was another PS13 with jun arches and 15s!!!
nikkisixx69
05-05-10, 20:12
I think, if i'm remembering rightly, that car was being broken on done deal....if not it was another PS13 with jun arches and 15s!!!
diffrent one , the one your thining of was a lighter blue/green color! that ones in england i think
bit of an update, stripped box out today, and the crank is out, going bringin it to engineering shop in the morn, needs mains and big ends, but didnt spin any. good news also the clutch is nearly new and also the timing belt:D which will keep the costs down thank god!
will get pics up this eve, got some coil overs:D brand new hsd rears, and npg(bridgestone) fronts. id never heard of npg coilovers before, but they seem a good bit of kit, came with pillowball top mounts, and there damper adjustable, great thing about them is that the inserts are removable, and they are kyb agx 4 way damping adjustables. replacements inserts are 95 euro each:D got them on last night, mother of god on ther floor:D pur lift is the lowest 2 poster you can get, an with the lift down, the rear wheels are still off the ground:D
have my shopping list now im off to collect some stuff.
collect reground crank, and bearings
two drop links,
two track rod ends,
2 gallons cheapo oil and 3 filters,
1 gallon of a decent oil.
ill get some pics up later, on a bad note, i think i may have broken my wrist last night:mad: so crank wont be going back in today.
nikkisixx69
14-05-10, 15:41
man up you fag an put the crank in!
fuck u pym, hows my cd lookin?
nikkisixx69
14-05-10, 15:51
fuck u pym, hows my cd lookin?
yeah nearly done, bitta tina turner, bitta take that, bitta justin bieber, all your favorites!
ya get the new boyzone on there? serious skiddin tunes man
serious tom
14-05-10, 16:05
i say fair play to you.
a project with no hanging about.
*i wants some tune-age* :(
pics:D cant even get it off lift, so ahd to drop it onto sume wheels for the time being just to see how she sits.
http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs332.snc3/29223_1383915071031_1026612936_30985182_2876533_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs352.snc3/29223_1383914791024_1026612936_30985178_2763033_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs341.ash1/29223_1383914831025_1026612936_30985179_5056982_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs341.ash1/29223_1383914951028_1026612936_30985180_4285639_n. jpg
new rear plate just for the laugh!
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs352.snc3/29223_1383915031030_1026612936_30985181_2738660_n. jpg
random bay pic
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs332.snc3/29223_1383915111032_1026612936_30985183_3252309_n. jpg
not much travel haha:cool:
http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs332.snc3/29223_1383915151033_1026612936_30985184_1014585_n. jpg
may need to roll arches
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs332.snc3/29223_1383915191034_1026612936_30985185_5986230_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs352.snc3/29223_1383915231035_1026612936_30985186_8355752_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs352.snc3/29223_1383915271036_1026612936_30985187_2181951_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs332.snc3/29223_1383915351038_1026612936_30985188_2980689_n. jpg
Administrator
14-05-10, 16:53
Roll the arches and get them out flush ;)
nikkisixx69
14-05-10, 16:55
spacers alan!! buy cooleys ones!
Roll the arches and get them out flush ;)
gona try but this thing is full of filler waiting to fall out! haha
spacers alan!! buy cooleys ones!
no im not flaring them arches theyll definatley crumble, unlike your amazingly smooth jdm tight ones:cool:
nikkisixx69
14-05-10, 17:03
no im not flaring them arches theyll definatley crumble, unlike your amazingly smooth jdm tight ones:cool:
the filler should be ok if we heat it!
nikkisixx69
29-05-10, 16:08
a little update from today!
shotgun pipes FTW!
http://i667.photobucket.com/albums/vv34/partyboy420420/290520101059.jpg?t=1275149144
http://i667.photobucket.com/albums/vv34/partyboy420420/290520101058.jpg?t=1275149168
http://i667.photobucket.com/albums/vv34/partyboy420420/290520101061.jpg?t=1275149168
http://i667.photobucket.com/albums/vv34/partyboy420420/290520101062.jpg?t=1275149168
http://i667.photobucket.com/albums/vv34/partyboy420420/290520101063.jpg?t=1275149168
wheels split! rollin on tens!
http://i667.photobucket.com/albums/vv34/partyboy420420/050520101042.jpg?t=1275149168
boso pipe ftw,looking sweet now lad :)
That looks sick ! Love the pipes especially !
way2fastforu
30-05-10, 17:12
likin the exhaust alan...did ya make it yourself ya???
no lad cant take credit for them, the brother welded them up for me!
cheers lads, taxin her tuesday cant wait to get her out on the road!
way2fastforu
30-05-10, 18:47
he done a savage job on it...wat size are the two pipes 2.5 or 3 inch??
3 inch:D but its not that loud. should get away with it for a while! ya he welded a few plates into this for me aswell. he does a good few exhausts.
way2fastforu
30-05-10, 20:41
savage...would he do somethin like that on the s13?? i def be interested in gettin one if he would
ya im sure he would dude, only thing is these are mild steel, so gona have to keep polishing them with braso.
on anther note. took off my cam covers earlier, all the breathers wer blocked. which may have caused the bearing failure. certainly wasnt helping it anyway!
cleaned them all up and piped them up for an oil catch tank!
way2fastforu
30-05-10, 21:02
ah gay i dont like polishin haha if i could get hold some stainless pipe ill et onto bout gettin him to do one for me.
ah gay where they fully blocked??? catch tank ftw:Dwana put one in the sr soon tryin to find one wit a breather on top
feck that ill just use an aul bottle or somethin. duno if catch tanks pass nct tho an ive mine in a few weeks!
way2fastforu
31-05-10, 08:42
sure send it thro wit it ta feck
nikkisixx69
31-05-10, 12:46
3 inch:D but its not that loud. should get away with it for a while! ya he welded a few plates into this for me aswell. he does a good few exhausts.
dude it sounds fuckin lurvly! gonna have to get brian to weld me up some boso pipes soon!:D
CillianS14a
31-05-10, 22:15
Looks well alan! Ya should be sound with the catch can/bottle, mine passed i think they just need to be sercurish to something.
taxed her today:D unfortunatley the front is pulled apart again. one of the cam seals started leaking. so changing them and the bottom seal as it was weeping too. just be on the road tomoro eve tho!:D
no diff yet:( gona wait till after nct to weld her up then the fun will begin!:cool:
nikkisixx69
04-06-10, 18:54
get low!!!
http://i667.photobucket.com/albums/vv34/partyboy420420/030620101071.jpg?t=1275677511
get low!!!
http://i667.photobucket.com/albums/vv34/partyboy420420/030620101071.jpg?t=1275677511
she passed the daily driver test! as long as it can make it up as far as nicks house itll get down any road in ireland! like a dirt track:eek:
finally got around to sorting my diff! chomp chomp :D:D
lovely s13 mate, actually love the black on gold. you should drive round pumpin sam sparrow now ;)
Aidan Hogan
08-07-10, 17:16
This car is super cool . Love it :cool:
few more pics!:D enjoying driving this now, gettin a turbo and chip soon, for a few more ponies:D
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs065.snc4/34634_1453112800931_1026612936_31155755_6959829_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs065.snc4/34634_1453112840932_1026612936_31155756_5532004_n. jpg
diff works haha back yards tight enough:D
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs025.ash2/34634_1453112760930_1026612936_31155754_3409314_n. jpg
was the first and proberbly the last hooooop il do in her, just had to be done wit da yard empty!
few pics nicks brother took, got some savage ones of nicks car too im sure he'll have them up soon!
http://mattpym.files.wordpress.com/2010/07/al-front-flash.jpg?w=500
http://mattpym.files.wordpress.com/2010/07/al-front.jpg?w=500
http://mattpym.files.wordpress.com/2010/07/al-rear-angle.jpg?w=500
gorgeous pics alan! haha wish i had a yard like dat GAAH!
drift student
22-07-10, 17:23
likin the splitter.
way2fastforu
22-07-10, 18:32
savage pics alan...matt is handy wit the camera ill have to get him to take few snaps my yoke :D
Kane-Driftcommunity
22-07-10, 18:50
love this style of RPS13
s15_spec_r
22-07-10, 18:57
shes a kool yoke, pure slag,. noice work man
180sxbreaker
22-07-10, 19:02
tis lookin well alan i met u in clarinbridge other nite i was in white over black booted cam:)
tis lookin well alan i met u in clarinbridge other nite i was in white over black booted cam:)
ah right! i didnt no who it was ya dont get many 86's down my road! what wer ya doin up my side? cam was sweet:D
180sxbreaker
22-07-10, 19:13
ah right! i didnt no who it was ya dont get many 86's down my road! what wer ya doin up my side? cam was sweet:D
i was up lookin at a b4 that cam ain't mine tis belongin to a mate he on di too it is a well minded one he is a finatic if it got scratch'd he'd b lookin at a re spray that type lad.....just said i'd say twas nice to see your yoke in flesh even if it was floggin rain:D
righto update on this, over the last few weeks there started to be a rattle in it, didnt sound like bearings but i cudnt find it for the life of me, so this morn i dropped the sump and dropped the rod caps and mains girdle and guess what.... there fuckin perfect! but the noise is still there an is getting louder:(
so i priced a head set 130 euro:eek: the only other thing that could be rattling is something in the head, what i dont no:( so i went up and bought a full engine off richie200sx from here, sound bloke:) gona rip mine out tmro and change over a few bits to it an fit that engine in, he got it off stonie on here so hopefully shes all good.
also got a t25g from john hinchy and a set of locking collars cheers down:cool:
and huge thanks to tweek off here who gave me an s15 pump for free at the weekend sound dude:D got a 180sx elbox and downpipe to go on as the 180 one is abit bigger than CA and nikkisixx off here gave it to me for some sexual favours!
finally had to get a clutch cylinder cos mine was leaking, very hard to find a bottom feed one, as most jap s bodies are side feed, luckily keith mc hugh had a box full of them an we got one to fit. so that problem sorted.
hopefully shell be all good again in no time thank god!:o
heres the situation as of today, got the engine out, sumps changed over, turbo off mine, went to fit the t25g to the mani but need to get oil feed made and rotate inlet housing, as it hits the mani! heads recked with it today, spent the money on engine and cudnt go to the races today with all the lads :mad: im fuuukin sickened:mad:
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs003.ash2/33514_1461322366165_1026612936_31175755_6873884_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs213.snc4/38977_1461322806176_1026612936_31175756_4643945_n. jpg
nikkisixx69
29-07-10, 16:24
^^^^^ my offer of a free half bottle of vodka still stands, plus its situations like this that you have to drink!
^^^^^ my offer of a free half bottle of vodka still stands, plus its situations like this that you have to drink!
nah man i cant i actually no money, i need a fookin job, when ive this think together ima drive it straight thru the front door of the dol office fuckin cunts
meet this on the road between clarinbridge and the motherhubards on the dublin rd fukin cool car
meet this on the road between clarinbridge and the motherhubards on the dublin rd fukin cool car
cheers ted :D
way2fastforu
29-07-10, 20:08
why ya takin the engine out dude??
s15_spec_r
29-07-10, 20:26
erm...... ta put the new one in?:rolleyes::p
this car luks da bogs dollox deffo ghetto beautiful
way2fastforu
29-07-10, 22:36
erm...... ta put the new one in?:rolleyes::p
ah that'd explain it...only took notice of todays update wit the pics didn see the one from yest:D
finally had to get a clutch cylinder cos mine was leaking
And when were you gonna tell me that eh???? You see I was right and you know it haha BOOM :D
not much done, need to get an oil feed made for turbo on tuesday, as neither the std one or sr20 one would do. ca block is a screw in fitting, sr20 block is a union fitting!
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs096.ash2/38114_1464195477991_1026612936_31183048_1396528_n. jpg
two engine side by side swapping over alternator an a few bits, i hope to god this engine is ok:(
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs269.snc4/39810_1464194557968_1026612936_31183045_1144667_n. jpg
mounting t25g to mani, just undid circlip on comp wheel and turned it so its not hitting the manifold!
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs096.ash2/38114_1464195397989_1026612936_31183046_7409759_n. jpg
changing clutch cylinder for a jap s14a one, only one i could find with a bottom exit for the pipe, most are side exit!
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs176.snc4/38114_1464195437990_1026612936_31183047_865577_n.j pg
poor baby looking sory for herself:(
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs196.snc4/38114_1464195517992_1026612936_31183049_2978099_n. jpg
engine should be back in tuesday tho an good to go fingers crossed!
nikkisixx69
01-08-10, 16:07
at least you no you have a 100% perfect bottom end!:D
at least you no you have a 100% perfect bottom end!:D
well thats it, handy to have for again i supose if this is going well now, ill tear it apart an through i set of rings in it and itll be a complete perfect spare! what u apta dude? bring me over them stickers and downpipe an ill make tea!
nikkisixx69
01-08-10, 16:19
well thats it, handy to have for again i supose if this is going well now, ill tear it apart an through i set of rings in it and itll be a complete perfect spare! what u apta dude? bring me over them stickers and downpipe an ill make tea!
weights at da mo!! ill drop in later on the way outta town! fitted new battery, bringin out the s13 later, thanks to andy, i gots the drift bug again!
weights at da mo!! ill drop in later on the way outta town! fitted new battery, bringin out the s13 later, thanks to andy, i gots the drift bug again!
haha gud stuff!
Nice man, REALLY likin' this :cool: Hook me up with a Reckless sticker :D
way2fastforu
01-08-10, 18:08
lookin good dude ya should jus 1jz it wile the ca's out:D...radfix will make ya up braided lines for the tubby or pirtek
well! few more bits done, engine will be dropped in in da morn! turbos all on, ended up having to cut and weld the two oil feed pipes, as i cudnt get a union to fit the block, there different to sr's:( all done now tho, shud be running tmro eve!:D
turbo all right to go, ive changed the actuator now tho so not as much bend on it
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs208.snc4/38750_1466388812823_1026612936_31189040_6231933_n. jpg
all bolted up!
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs220.snc4/39328_1466389092830_1026612936_31189041_3798996_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs220.snc4/39328_1466389132831_1026612936_31189042_8084983_n. jpg
had to run a vacuum from da inlet to the new turbo as it doesnt have a take off like the stock t25! water lines all lined up perfect too so happy days!
Cooly cool, Just noticed there was a union fitting on the T3 in my room, Wonder could that have been any use....oh well:rolleyes:
Cooly cool, Just noticed there was a union fitting on the T3 in my room, Wonder could that have been any use....oh well:rolleyes:
nah doubt it dude, the oil feed banjo bolt on a t25 n t25g are different threads even tho there suposed to be the same core:confused: ah well hopefully all sorted now, droppin it in tmro all goin well
nikkisixx69
03-08-10, 17:34
nah doubt it dude, the oil feed banjo bolt on a t25 n t25g are different threads even tho there suposed to be the same core:confused: ah well hopefully all sorted now, droppin it in tmro all goin well
good stuff! nice to see u and brian got something other than shouting done haha!
good stuff! nice to see u and brian got something other than shouting done haha!
haha fuck you pym, if you made tea we wuda calmed down! what u at for da eve?
haha fuck you pym, if you made tea we wuda calmed down! what u at for da eve?
It is only the truth though, 95% of the time is spent bitchin at each other haha. Get it runnin for 2moro evenin dude!!!
If you're not up to much call up here for a while. I got terrible news today btw:eek:
right so i bit the bulitt and stripped my original ca, cant find much wrong with it:confused: had a gud engine builder to have a look too and he cant find anything wrong, could have done with a freshen up anyway! here sum pics, just have to final surface the block and head and there done. gona check the bores tomoro but they seem ok, bearings are all new anyway. so should be back together soon!:D
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs107.ash2/38702_1469731816396_1026612936_31195694_3678214_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs069.ash2/36821_1469732336409_1026612936_31195696_5282500_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs149.snc4/36821_1469732376410_1026612936_31195697_2616955_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs149.snc4/36821_1469732416411_1026612936_31195698_6144918_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs149.snc4/36821_1469732456412_1026612936_31195699_3498939_n. jpg
way2fastforu
06-08-10, 19:24
good stuff dude:D
cheers dude, just going to rebuild this engine and go from there, bita wobble in the rod bushs but nuthin major, other than that theres nuthin wrong with it:( have had a good few look over it all now and im sick of second guessing my self, ive built all my engines an theve always been perfect think this car is cursed 666.....
left it last night with the block back together, and head back together, just waitin for a head gasket now:D
before torqueing the mains
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs225.snc4/38599_1472781812644_1026612936_31205010_1702760_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs228.snc4/38714_1472782292656_1026612936_31205017_6852169_n. jpg
all ready:D
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs228.snc4/38714_1472782252655_1026612936_31205016_7329234_n. jpg
way2fastforu
09-08-10, 19:12
savage cabbage...wens the head gasket due??
way2fastforu
09-08-10, 19:21
handy!!.....
got bored, and painted rocker covers, plug cover and timing belt cover! abit golder than i thaut it were gona be but feckit!
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs205.snc4/38577_1473356747017_1026612936_31206981_143035_n.j pg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs267.snc4/39702_1473357147027_1026612936_31206982_6095077_n. jpg
an have engine all ready to come out
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs127.ash2/39702_1473357187028_1026612936_31206983_6587086_n. jpg
Looks good fella :) Gold is really nice against the black, you painting the engine bay with the engine out ?
Looks good fella :) Gold is really nice against the black, you painting the engine bay with the engine out ?
i was going to, but feck it, il just give it a bit of a clean, and paint some stuff! too much stripping back to paint it!
180sxbreaker
09-08-10, 21:31
it looks like top secret gold looks well ted fair play
im delighted its all comin together 4 ye man. im really glad you didnt break it . persistance pays off sweet car.
ya, its supossed to be matt but is more satin, its what i done the roof, lights ,boot and spats in, its great stuff, done all the bits on the nova with it aswell!:)
Handy colour to have close by alright ;)
Handy colour to have close by alright ;)
dangerous colour to have close by!
haha bit of an update. got this runnin sweet yesterday changed plugs and bled clutch, an went abit mad lastnight, an she went pop:eek: locked up mid drift an then wouldnt start ! eventually got her home and theres no compression in cylinders 3 or 4, but da gasket not blowin through, ahwell, savin for an sr20 or rb now:D
haha bit of an update. got this runnin sweet yesterday changed plugs and bled clutch, an went abit mad lastnight, an she went pop:eek: locked up mid drift an then wouldnt start ! eventually got her home and theres no compression in cylinders 3 or 4, but da gasket not blowin through, ahwell, savin for an sr20 or rb now:D
RB *Cough**Cough*
So glad you're not selling
RB *Cough**Cough*
So glad you're not selling
been pricing rb on the cheap still gona be around the 1k mark. sr20 well i duno really prob a few hundred less, im seriously contemplating putting a redtop into it. a have a perfect one here, and a box from an old ohc carlton, and mounts that i can make fit, all id need is a rwd exhaust mani. hmm an xe with cams an webers will make about 200 bhp and will sound fuuckin saucy.
been pricing rb on the cheap still gona be around the 1k mark. sr20 well i duno really prob a few hundred less, im seriously contemplating putting a redtop into it. a have a perfect one here, and a box from an old ohc carlton, and mounts that i can make fit, all id need is a rwd exhaust mani. hmm an xe with cams an webers will make about 200 bhp and will sound fuuckin saucy.
hmmm, well if you are changing you may as well do a right job of it so maybe the SR if you can get it in right for that little bit less than an RB....Still RB for the sound of the century:cool:
Fire the Opel engine into it. :D
Stevie e39 drift
21-08-10, 20:06
any pics of it as she stands ?
1st and last ring ill ever do! haha way shes sitin now!
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs025.ash2/34634_1453112760930_1026612936_31155754_3409314_n. jpg
]http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs065.snc4/34634_1453112800931_1026612936_31155755_6959829_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs065.snc4/34634_1453112840932_1026612936_31155756_5532004_n. jpg
Stevie e39 drift
21-08-10, 20:10
1st and last ring ill ever do! haha way shes sitin now!
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs025.ash2/34634_1453112760930_1026612936_31155754_3409314_n. jpg
]http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs065.snc4/34634_1453112800931_1026612936_31155755_6959829_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs065.snc4/34634_1453112840932_1026612936_31155756_5532004_n. jpg
it looks so fukin class how could you sell that ? the bumper is cool how did you do that?
it looks so fukin class how could you sell that ? the bumper is cool how did you do that?
just a heep a stickers man!:D cheers dude
Stevie e39 drift
21-08-10, 20:12
any old stickers haha
red top the shit out of it,instead of opels fitting ca/sr nissan with c20xe :cool:
would it be first in ireland??
well as of this morn this is how its sitting.... again!!
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs363.snc4/44587_1492167137265_1026612936_31255415_2775655_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs202.ash2/46515_1492167297269_1026612936_31255416_1753207_n. jpg
gona rip the head of it now in a min, had the bloody engine out in 45 mins could do it with my eyes closed at this stage!!
still duno what to do, i think sr is out the window. too dear. either build a good ca (ive a set of forged oversized pistons found cheapish) or go rb20-25 hmm i duno yet, but on a good note straightliners is on in a couple of weeks so the nova will be getting a day out :D really need to bring it for a spin an see what itll need, havnt drivin it atall since the last drag day it did!:eek:
id sr it before rb just MO
Robbie Daly Ps13
27-08-10, 14:52
well as of this morn this is how its sitting.... again!!
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs363.snc4/44587_1492167137265_1026612936_31255415_2775655_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs202.ash2/46515_1492167297269_1026612936_31255416_1753207_n. jpg
gona rip the head of it now in a min, had the bloody engine out in 45 mins could do it with my eyes closed at this stage!!
still duno what to do, i think sr is out the window. too dear. either build a good ca (ive a set of forged oversized pistons found cheapish) or go rb20-25 hmm i duno yet, but on a good note straightliners is on in a couple of weeks so the nova will be getting a day out :D really need to bring it for a spin an see what itll need, havnt drivin it atall since the last drag day it did!:eek:
Wats the story with the nova....! Looks mean....! Iv always had a horrid horn for novas.....
Iv 2 rb20's full running gear if your interested lad....!
Wats the story with the nova....! Looks mean....! Iv always had a horrid horn for novas.....
she's C20LET :D
spec of it is too long at this stage, 738 kg an 300 bhp:o mostly only for track an drag these days, but its still nct'd so she gets the odd blast!!
Robbie Daly Ps13
27-08-10, 15:03
I like the sound of this.....! Would love to get a look at this....! 300 Bhp in a nova = very very fast....! You selling it by any chance....!
I like the sound of this.....! Would love to get a look at this....! 300 Bhp in a nova = very very fast....! You selling it by any chance....!
nah dude, i have it for years now, built it myself so i doubt i cud ever sell her! ive been offerered good money for it before but couldnt sell her! cheers for the interest tho:D
nah dude, i have it for years now, built it myself so i doubt i cud ever sell her! ive been offerered good money for it before but couldnt sell her! cheers for the interest tho:D
RB20 RB20 RB20 RB20 RB20 RB20 RB20 RB20 RB20 RB20 ;)
Nah you defo can't sell the Nova, Not with out having given it a right proper driving....and all the memories!
jdmireland
02-09-10, 21:22
serious car loving front splitter
mother fuckers. i found out why my gasket blew and what my rattle was. my block, was an n/a block, with n/a pistons. i realised this when there was no oil squirters in my block. gasket blew cos comp was too high. an the rattle was very bad detonation, thats why it went away when i retarded the timing, and got worse with more boost:eek:. mystery solved, just wonder where the fuck some1 found a ca18de jap engine!? an stuck a turbo on it!?? the mother fuckers.
nikkisixx69
03-09-10, 22:50
mother fuckers. i found out why my gasket blew and what my rattle was. my block, was an n/a block, with n/a pistons. i realised this when there was no oil squirters in my block. gasket blew cos comp was too high. an the rattle was very bad detonation, thats why it went away when i retarded the timing, and got worse with more boost:eek:. mystery solved, just wonder where the fuck some1 found a ca18de jap engine!? an stuck a turbo on it!?? the mother fuckers.
the mysteries of the ca haha!
the mysteries of the ca haha!
fuckin typical i shud build an n/a engine now for the laugh run in on good ole' carbs:D
fuckin typical i shud build an n/a engine now for the laugh run in on good ole' carbs:D
Ehhhhmmmmmm No haha....... what's the plan so? buy the built engine
Ehhhhmmmmmm No haha....... what's the plan so? buy the built engine
maybe, sick a driving the polski calibra again, need to get this back on road asap:D
maybe, sick a driving the polski calibra again, need to get this back on road asap:D
You should I reckon..... Take the shonky Kahns off and you wont feel as foreign!!! You back from blighty???
You should I reckon..... Take the shonky Kahns off and you wont feel as foreign!!! You back from blighty???
ive only tyres on them 17's:o ya came back this mornin, lunatics up there, the groomsmen took off outa the church on 2 r1's and two fireblades doin burnouts then up the road on the back wheel, haha da whole crowd was there preist an all:eek:
ive only tyres on them 17's:o ya came back this mornin, lunatics up there, the groomsmen took off outa the church on 2 r1's and two fireblades doin burnouts then up the road on the back wheel, haha da whole crowd was there preist an all:eek:
Hahaha bloody nutters.... it cool for me to use the lift this week????
Hahaha bloody nutters.... it cool for me to use the lift this week????
shud do, ill buzz ya tomoro!
Nice one, now you should get on buying that built engine in the mean time yes!
Aidan Hogan
05-09-10, 21:18
Deadly man , never heard of a ca18de around Ireland for sale :eek:
So she'll be back and the silly selling idea is gone :D;)
Deadly man , never heard of a ca18de around Ireland for sale :eek:
So she'll be back and the silly selling idea is gone :D;)
i no man feckin crazy! ya she'll b on the road soon again thank god:D altho it will b for sale soon enough id say, gettin back into a vauxhall prob a cav gsi or a mk2 sri130 :o
Aidan Hogan
05-09-10, 21:59
Kinda off topic but whats insurance like on them ??
Kinda off topic but whats insurance like on them ??
couldnt tell ya dude, i drive most yokes 3rd party! sure ya couldnt insure a rust bucket!:D
Aidan Hogan
05-09-10, 22:16
couldnt tell ya dude, i drive most yokes 3rd party! sure ya couldnt insure a rust bucket!:D
Haha be a long time til I'm driving 1 anyway but yours has made me want 1 haha
Nothing like having a car that scrapes everywhere it goes :p
nikkisixx69
05-09-10, 23:31
i no man feckin crazy! ya she'll b on the road soon again thank god:D altho it will b for sale soon enough id say, gettin back into a vauxhall prob a cav gsi or a mk2 sri130 :o
gaaay. that is all
gaaay. that is all
says the man who just bought a honda civic?! i still have the manta remember:D got an engine sorted for that too:D
update:D finaly got an engine! got it off gofasters13 on here, sound bloke an gud ta deal with!:cool:
anywho, its an overbored block with wiesco pistons, reground crank and oversized bearings, cometic steel headgasket, new oil and water pump, head looks brand new, all valves perfect no coke, head is spotless valves lifters etc look brand new. puttin it back together tomoro an have her runnin asap:D
few pics!
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs310.ash2/58992_1507060789597_1026612936_31289991_2953300_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs435.snc4/47818_1507061549616_1026612936_31289997_3092216_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs435.snc4/47818_1507061589617_1026612936_31289998_1187956_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs215.ash2/47818_1507061629618_1026612936_31289999_293071_n.j pg
Might actually get to see this going now :D
hopefully man just need a cheapo intercooler now!
nikkisixx69
09-09-10, 00:21
oh its on now bitch!!:D
Nice one, Just dont go selling it for a bloody cav, You aint fat or bald enough.....or have enough kids to necessitate all those doors
woohoo!!! its on like donky kong! :D more CA's!!!
better get it running soon for the photoshoot! :D
Nice one, Just dont go selling it for a bloody cav, You aint fat or bald enough.....or have enough kids to necessitate all those doors
dont start with me ford boy!:rolleyes:
way2fastforu
09-09-10, 13:25
good stuff al...now get it in :D
good stuff al...now get it in :D
have block and head back together now just mani's sump turbo and flywheel she'll b running tmro hopefully:D
nikkisixx69
09-09-10, 13:31
have block and head back together now just mani's sump turbo and flywheel she'll b running tmro hopefully:D
awesomness! you have to throw a holset or somethin big on it now, t25g aint gonna cut it!
awesomness! you have to throw a holset or somethin big on it now, t25g aint gonna cut it!
i no man an da h/g is a thicker one.! haha holset be the job, big top mount out thru the bonnet:D what u at?
nikkisixx69
09-09-10, 13:42
i no man an da h/g is a thicker one.! haha holset be the job, big top mount out thru the bonnet:D what u at?
nawthin! tryin to find cheap insurance!
nawthin! tryin to find cheap insurance!
fuck insuring the 200 man, just get a test on it ! nearly there now:D
woohoo!!! its on like donky kong! :D more CA's!!!
better get it running soon for the photoshoot! :D
You should see his garage...CA's everywhere :eek:
dont start with me ford boy!:rolleyes:
Awrite darlin....Fowd RS .......Geeeeaaarrrrr
We should weld the T3 on :rolleyes:
getting there now, heads torqued, all bearings torqued, timing belt on, inlet mani on, turbo and mani on, just sump, engine mounts, timing belt covers rocker covers an flywheel an clutch an she ready to drop back in:D
how i left her
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs408.snc4/47160_1508025853723_1026612936_31291865_164388_n.j pg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs340.ash2/62017_1508026173731_1026612936_31291866_5271876_n. jpg
poor car lukin sory for itslef:( not for long tho hopefully b goin tomoro!:D
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs340.ash2/62017_1508026213732_1026612936_31291867_1493778_n. jpg
way2fastforu
09-09-10, 18:42
savage cabbage...stick the big turbo on :D
savage cabbage...stick the big turbo on :D
ill see how shes goin first, need a fmic soon, then il decide on turbo! thinkin maybe td05 or somethin cheap like that!
way2fastforu
09-09-10, 18:51
you get a fmic for handy enuf moneys specially if ya buy 2nd....much the new engine set ya back??
you get a fmic for handy enuf moneys specially if ya buy 2nd....much the new engine set ya back??
350... im happy with that tho, got a decent amount of stuff, wiesco's are huge money for them, cometic gasket, reground crank and all the bearings, block is mint, no corrosion, head is a recon or exchange job it brand new!:eek: hopefully now itll go abit better! itll prob b slower now as its low comp an ill b running the same boost! not for long tho:D
would you not use that Volvo intercooler you have??? That thing is pretty damn big like....Cool beans otherwise
way2fastforu
09-09-10, 19:07
get a boost controller an knock it up a bit man it'll help wit the lower comp...as long as you've an upgraded fuel pump you should be able to run .9 bar safe enuf befor mappin...you can wit the sr's anyway...350 wasnt bad wit wiesco's an a cometic mhg an a mint head an clean block...is it runnin standard bearins??
would you not use that Volvo intercooler you have??? That thing is pretty damn big like....Cool beans otherwise
the feckin yoke is the wrong one they use, its two short the ends wont come areound the rad!
i no man an da h/g is a thicker one.! haha holset be the job, big top mount out thru the bonnet:D what u at?
i wreckn hx30 it glad a see it,ll be running soon
its alive! was abit worried when i started it as its missfiring, but i think i have that figured out now, think its an injector, have done a comp test an it fine, took out plugs and cleaned them, put them back in and ran perfect for about 4 seconds, then started missing again, pulled out plug no.4 and it was soaked and smoke comin outa cylinder awfull smell a petrol off it, so im gona change them out tomoro an hopefully itll b all gud!:D
woohoo vid and pics or it never happened!!! :D
woohoo vid and pics or it never happened!!! :D
actually i think matt(hachi) took some pics today he was over for a look!
actually i think matt(hachi) took some pics today he was over for a look!
friggin' hope he did :p ill sort out my wheel issues and then we gotta meet up asap :D
I did and I'll have them up in a while.....dont expect anything epic
the feckin yoke is the wrong one they use, its two short the ends wont come areound the rad!
ive an intercooler there 100quid
http://i14.photobucket.com/albums/a322/Madmat4x4/P9113526.jpg
http://i14.photobucket.com/albums/a322/Madmat4x4/P9113528.jpg
Doesnt like speed bumps :rolleyes:
http://i14.photobucket.com/albums/a322/Madmat4x4/P9113537.jpg
Splitter scrapage
http://i14.photobucket.com/albums/a322/Madmat4x4/P9113535.jpg
http://i14.photobucket.com/albums/a322/Madmat4x4/P9113533.jpg
Nice mould on the bumper :D Also, you should get a full exhaust, its crazy the differance itl make taking that pee shooter front section off!
Nice mould on the bumper :D Also, you should get a full exhaust, its crazy the differance itl make taking that pee shooter front section off!
yea man i no, im buyin a 6 foot length of that flexable pipe stuff to make up a system soon!
Prodrifter86
13-09-10, 13:10
looking good dude!. i have to admire that you havent given up after gettin lots of hardship. fairplay
way2fastforu
13-09-10, 14:19
ya think ya'd clean the mould off the bottom of your bumper before puttin pics up:p
ya think ya'd clean the mould off the bottom of your bumper before puttin pics up:p
i never even seen that mould before\1 an i had more important things on me mind at the time!:o
ca's are so damn sexy its not even funny! :D
this is running now an goin perfect:D woohoo, a wash an a few pics later :D:D
way2fastforu
14-09-10, 16:13
wooo good stuff....dont forget the mould on the front bumper wen your washin it :p:D
nikkisixx69
14-09-10, 18:35
fuck yeah!
woohooooo!!!!! photoshoot soon! :D
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.