s14 project :)

[mike g]

ok putting this back up now!!

here she is day one when i got here

S15 Spec R engine
respray in pearl gray met with gold metalflake,
Rays Chrome Dished alloys! front 17" and rear 18" 11 inches wide,
Apexi Front Mount Intercooler Kit,
apexi induction kit
cusmo rap cap
Koyo Rad,
nismo 2 way lsd,
Apexi boost Gauge,
Full Exhaust System
Downpipe
Decat,
Silicone Rad Hose,
Kei-Office Full adj Coilovers Camber Adj Top Mounts,
ORC Clutch,
Flared Arches,
Full Aero Kit ,
Cusco Front and Rear Strut Braces,
Bride Recliner
Momo Wheel
kouki rear lights
Nismo Shift Knob
Drift Handbrake Button
Greddy Temp Gauge
braided oil line
uprated gearbox mounts
http://i200.photobucket.com/albums/aa79/glanza_v_1998/3040368935a6430881676l.jpg
http://i200.photobucket.com/albums/aa79/glanza_v_1998/3040368935a6430899294l.jpg
http://i200.photobucket.com/albums/aa79/glanza_v_1998/3040368935a6430899239l.jpg
http://i200.photobucket.com/albums/aa79/glanza_v_1998/sylvia.jpg

[mike g]

here a few bits i picked up for it back in the day

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0003-1.jpg
http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0004-1.jpg
http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0006.jpg

engine bay day one

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0015.jpg

[mike g]

got two brides in then!! yes boy

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0019.jpg
http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0018.jpg

heat wrapped my tomei mani and tomei elbow

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0003-3.jpg
heat wrapped it and also heat wrapped my tomei manifold!!
http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0002-2.jpg
http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0001-1.jpg

[mike g]

got a greddy boost controller then :)

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0018-1.jpg


http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0020-1.jpg


http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0001-3.jpg

random pic

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0019-2.jpg

[mike g]

got a sparco deep dish off johnny P then!! woop

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0015-5.jpg


few pics from the magazine shoot

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0006-5.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0009-4.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0008-5.jpg

[Dunnedriftin]

Nics S14 lad!

fair play...

[mike g]

sprayed the calipers

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0013-6.jpg

got z32 afm today

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0014-5.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0015-6.jpg

these arrived aswell

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0016-5.jpg

federal for the back

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0017-4.jpg

and toyo proxes for the front

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0020-6.jpg

and the new baby

TRUST T518Z turbo

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0018-6.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0019-8.jpg

[mike g]

new intercooler

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0007-7.jpg

so i took advantage of the good weather :)

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0008-8.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0009-8.jpg

[mike g]

new front yes boy

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0012-6.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0013-8.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0014-7.jpg

these came 3weeks ago and got them very cheap and brand new

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0007-9.jpg

seeing as i like my diy we said we would attempt to fit it

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0015-8.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0016-7.jpg

had the grinder out and got a good fit on both wings

[mike g]

the front bumper just lined up fast

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0017-7.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0018-8.jpg

side with fenders and front bumper

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0019-10.jpg

next was the bonnet.. got a good fit but need some washers on the bolts to raise it up about 2-3mm

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0020-8.jpg

quick idea with a headlight

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0001-8.jpg

other wing lines up

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0006-8.jpg

[mike g]

next lined up the wings with the front bumper

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0007-8.jpg

and the bonnet and the other wing lined up

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0012-7.jpg

looking good so far

done

http://i200.photobucket.com/albums/aa79/glanza_v_1998/28042009738.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/28042009739.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/28042009742.jpg

me and one of the lads did it in 4 hours!! only few small bits left to do like washers on bonnet and need few on drivers side headlight and bolt on front bumper properly

going for paint in 2weeks!!

[mike g]

small thing here!!
have bonnet pins but not sure if i want to put them on really!!

so got double sided tape and put them up against it

with

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0017-8.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0018-9.jpg

without

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0019-11.jpg

[mike g]

and here the spec as it stands at the min

S15 Spec R engine
TRUST T518Z TURBO(10cm exhaust housing)
respray in pearl grey metallic with gold metalflake
Enkei racing ABC Exclusive front alloys 17x9.5J with new 235/40/17 toyo proxies T1R's
Rays Engineering Pleasure Lictrix rear alloys 18x11J with new 265/35/18 federal 595's
Front Mount Intercooler
apexi induction kit
Koyo Rad
Cusco 2 way lsd
HKS 555cc injectors
Apexi boost Gauge
Full Exhaust System
Downpipe
Decat
Tomei turbo elbow
Tomei manifold
Trust adj actuator
Silicone Rad Hose
Kei-Office Full adj Coilovers Camber Adj Top Mounts
ORC Clutch
Flared Arches
Full VIP Kit made by JC Fibreglass in Japan (very Rare)
Cusco Front and Rear Strut Braces
2 Bride Recliner seats
Sparco deep dish steering wheel
kouki rear lights
Nismo Shift Knob
silvia gear gaitor
Drift Handbrake Button
Greddy Temp Gauge
Greddy turbo timer
braided oil line
cosmo rad cap
uprated gearbox mounts
Walbro Fuel Pump
apexi power fc + commander
greedy profec B- Spec II boost controller
rocker cover resprayed blue
z32 afm
D2 Harness
Back stripped out and sprayed black

[Jay Rockett]

This car is damn hot, makes me more and more jealous everytime i see it!

What power did you get out of that turbo?
Its the next one up from mine but from what i can see it wont fit with my manifold as at the mo my T157 is nearly resting against the engine mount!
any more pics of the mani and turbo in place??

[Barry]

[QUOTE=Jay;955]This car is damn hot
QUOTE]

+1

[mike g]

This car is damn hot, makes me more and more jealous everytime i see it!

What power did you get out of that turbo?
Its the next one up from mine but from what i can see it wont fit with my manifold as at the mo my T157 is nearly resting against the engine mount!
any more pics of the mani and turbo in place??

havent had it dyno's now since the new turbo went in!! will be doing it during the summer but will deffo be 350bhp+ as iv a few other bits going in..

these the only pics i have of it at the min!!

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0001-7.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0002-6.jpg

can take a few if needed

[Jay Rockett]

Hmm, can ya see if your exhaust housing is near your engine mount??
Mine touching! could be the different manifolds..

I'm getting mild cams, increasing boost and a remap soon so hoping to get 350bhp(ish) aswel with loads torque!

Not that i'm copying, haha:D

What boost & power you running at the mo?

[serious tom]

is it me or would that car be soo cool to just drive about in and look pimp :)

its looking well !

[mike g]

Hmm, can ya see if your exhaust housing is near your engine mount??
Mine touching! could be the different manifolds..

I'm getting mild cams, increasing boost and a remap soon so hoping to get 350bhp(ish) aswel with loads torque!

Not that i'm copying, haha:D

What boost & power you running at the mo?


il check when it drys up!! pissing rain

im running .9 - 1bar at the min so power wise its be a guess but 300+ i say!! last dyno was with hks turbo with 308bhp and 368ft/lb of torque

[Jay Rockett]

Jesus thats good torque! are ya gona do a few drift days with it?

Next ones a week away, DO IT!!!

[mike g]

Jesus thats good torque! are ya gona do a few drift days with it?

Next ones a week away, DO IT!!!

i will be doing them lad..

cant make next week as car is going into panel beater on wenesday for spraying and abit of filling so it be in there for 2weeks :(

[mike g]

got my colour picked out and collecting the paint tomorrow :):)

[Administrator]

i will be doing them lad..

cant make next week as car is going into panel beater on wenesday for spraying and abit of filling so it be in there for 2weeks :(

Bring it up to Nutts before you paint it :D

[mike g]

Bring it up to Nutts before you paint it :D

wish i could.. going in now tomorrow evening to be started..

plus iv no tax, wheels off being painted too so no tyres

[mike g]

was in there today to see how it was looking

got the aireal removed so the car would look smoother

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0014-9.jpg

there use to be a spolier on it in japland so that was covered with stickers and they started to peel and u could see the wholes where it used to be so i got that filled over aswell for the smooth look

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0015-9.jpg

all cracks in back bumper fixed and primed

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0016-8.jpg

s14.5 fenders primed

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0017-9.jpg


http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0018-10.jpg

s15 bumper done aswell

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0002-7.jpg

[mike g]

sideskirts primed

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0019-12.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0001-9.jpg

bonnet aswell

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0005-9.jpg

got the mirrors painted in the custom pearlesant metallic grey with gold metalflake to see if its what i wanted. pics dont do it any justice as its from a gay camera fone but my god its savage looking

in the booth

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0003-10.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0004-10.jpg

out in the sunlight

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0006-9.jpg

he just wanted the go ahead with the metalflake to see if i liked it and i do so the bodykit being done now and the shell tomorrow or thursday

all i can say is i can wait to have it back

[PeterT]

as i said earlier, hooray for sparkles!

[Simon]

my two brides will set it off man, so please buuuuuuuuuuuuuy them hahahah

[mike g]

my two brides will set it off man, so please buuuuuuuuuuuuuy them hahahah

depends on money lad:)

[Simon]

depends on money lad:)

ill do a deal wit ya on your recliner???

[Eoin R.]

Looks the job mike!:cool:

[Administrator]

Looking good Mike! Paint looks cool! Can't wait to see it finished!

[mike g]

hopefully be done the weekend and its getting magazine featured again so ye will all see it in there aswell and now that it will be done i can go to a few events :)

[Kruizer]

Looking right well fella... Did the car come from powervehicles ?

[BoyRacer_X]

Savage car lad!

Where did u get the s15 front??:)

[serious tom]

its looking good,
gona be class when its finished!

[mike g]

Looking right well fella... Did the car come from powervehicles ?

ya it did!!

also to let ye know!!

ITS DONE:)

[Romo]

how can you post a comment like that without pics!!??!!

[mike g]

to be a tease

[mike g]

il throw up a few pics now in a min

[Administrator]

how can you post a comment like that without pics!!??!!

+1 Do ittt!

[mike g]

here she is

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0012-9.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/edit.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0014-10.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0009-10.jpg

pics are only taken with a camera fone!! will get proper ones soon!! the colour is different than the last time but way way better and sparkler :):)

i love it

[AEf20c]

Looks mint!, love the colour.

[Tekno Twinky]

Looks very profesional matey!

Areyou running spacers on the back? wheels look a bit too wide for your arches ?

This sorted and a little dropping wouldnt go a miss for a jenna jameson porno finish :)

Do you slide it ?

[mike g]

Looks very profesional matey!

Areyou running spacers on the back? wheels look a bit too wide for your arches ?

This sorted and a little dropping wouldnt go a miss for a jenna jameson porno finish :)

Do you slide it ?

no spacers!! there 18x11J on the back!! just got it back yesterday so will sort them all out!!

i do slide but more off a street slider at the min.. going WGH soon and now its done il make a DI event :)

[Administrator]

That looks fucking class Mike! Bet your happy with how it turned out! I wasn't sure about it at all but seeing those pics it was definitely a good move.

[mike g]

im delighted dar and now i can drive it as i havent drove it in like 7weeks so happy days!! :):) im in love with it!! will get some proper pics soon lads!! :)

[Stevo]

Nice one mike. looks like a well tidy job on it!!

[sidewayssr20]

looks mental lad well done

[Frankae86]

The wheel to arch in back looks the nuts!!!

[serious tom]

now thats JDM jizzin material,
ichigo worked out well in the end and now looks super with the JDM sparkle-ness:p
im sure you can dori in style now ;):)

[mike g]

few pics form earlier but will get more soon!!

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ali001.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ali003.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ali006.jpg

[Jay Rockett]

JEEEEEESUS!!!!

That look fooooooooking amazing mike!

[Stevo]

JEEEEEESUS!!!!

That look fooooooooking amazing mike!

What he said fair play man!!

[Rosa]

that looks savage!!fair play

[laney]

wow thats pants jizzin material rite there ... fair play mike shes come a looong way!!

[PeterT]

yum yum yum in my bum bum bum. that looks haaaaaaaawt!

apart from the wheel arch gap in the front :(

[Romo]

FAT wheels, win win :)

that looks amazing mike fair play

so


whats next on the list??

[mike g]

whats next on the list??

wait and see:p

got a "MINT" spare bumper today off johnny P the one that was on his car at ennis..

not bad for €50, sound johnny

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0019-13.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0018-11.jpg

[mike g]

gave it a quick clean now today for the 1st time.. when i finshed the sun went away(cunt)

but will give it a proper going over during the week

http://i200.photobucket.com/albums/aa79/glanza_v_1998/silvia001Small-1.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/silvia002Small.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/silvia005Small.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/silvia004Small.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/silvia003Small.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/silvia006Small.jpg

[thegosson]

oh i really like that. fair play to ya lad. that other bumper isnt really mint tho is it? maybe its just me but is there not a big chunk missing out of it?

[mike g]

ya its far from mint but thats what johnny p calls it!! lol..

its nearly fixed now anyway and its handy to have a spare :)

[Davie]

thats a stunner mike,loving the wheels,how do ya find the staggered wheel sizes?
and whats the t518z putting out

[mike g]

thats a stunner mike,loving the wheels,how do ya find the staggered wheel sizes?
and whats the t518z putting out

cheers!! staggered wheels sizes FTW.. find them like a nice cup of tea:)

dont know what power it putting it yet!!

alot???

lol.. will know soonish

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0010-9.jpg

no holes anymore where the spoiler used to be

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0011-7.jpg

no more aireal

http://i200.photobucket.com/albums/aa79/glanza_v_1998/ABCD0012-10.jpg

all shiney

[Davie]

looks sweet,who's mapping the car?

[mike g]

looks sweet,who's mapping the car?

TDP i say will be doing it!! with a set of mild cams and a small few others i should be running about 370ish

here is a few randoms from today as me was bored!!

http://i200.photobucket.com/albums/aa79/glanza_v_1998/mikespics002.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/mikespics003.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/mikespics004.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/mikespics006.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/mikespics007.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/mikespics008.jpg

[mike g]

http://i200.photobucket.com/albums/aa79/glanza_v_1998/mikespics009.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/mikespics011.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/mikespics012.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/mikespics013.jpg

http://i200.photobucket.com/albums/aa79/glanza_v_1998/mikespics014.jpg

[Administrator]

Looking good man! So when you gonna slide it!?

[Nicky]

Looking very well man.. Health to drive :D

Let me know how TDP get on with mapping your Apexi.

[mike g]

Looking good man! So when you gonna slide it!?

was sliding tonight but gay coilover knocking so ffrenchy better have them ready for me to take tomorrow!!

im doing to trackdays in mondello and il try and match nuts on the 3rd!! have a few bits that i need to sort asap really

[mike g]

just back from my 2nd photoshoot for it!! i will have some savage pics to go up soon i tell ya

[Simon]

just back from my 2nd photoshoot for it!! i will have some savage pics to go up soon i tell ya

who was the photoshoot wit?? pics pics pics pics pics

[mike g]

who was the photoshoot wit?? pics pics pics pics pics

pics as soon as i get them il post a few up!!:p

[PS13!]

man that is a beast of a car!!!!!!

[mike g]

man that is a beast of a car!!!!!!

sure was.. its happy in the sun in Portugal now

[Titan Autoworks Japan]

sure was.. its happy in the sun in Portugal now

...............................

[Prodrifter86]

dam in jealous! lovely car ! actually not lovely! Savage is the word!:D

[PS13!]

sure was.. its happy in the sun in Portugal now

when did u send her away??:(

[mike g]

when did u send her away??:(

1jz was calling me :D

[mike g]

pic the lads that bought it off me sent..

here it is in lisbon

http://i200.photobucket.com/albums/aa79/glanza_v_1998/DSC03069Small.jpg

[drift student]

miss it much????????????

[mike g]

miss it much????????????

at times, miss the look of it the most, as having a 1jz now shows me that sr20's are shite, need to much money to make any decent powar :D:D