Breaking** R32 Skyline RB25 - full road car - loads of goodies

[AndrewR32]

**CAR IS NOW BEING BROKEN**

Tested 1992 KH2 R32 Skyline, Irish Reg, all the usual standard interior parts, etc

Exterior/Panels:
Type M Skirts - SOLD
Type M Skirts (few cracks) - SOLD
Type M Spats - SOLD
Rear Bumper - SOLD
Genuine GTR Front Bumper & Splitter - SOLD
Genuine GTR Front Grille - SOLD
Genuine GTR Aluminium Front Wings - SOLD
Genuine GTR Indicators - SOLD
Genuine GTR Spoiler - SOLD
GTR Carbon Bonnet with lockable aero catch - SOLD
GTST Bonnet Cut to GTR Style - €50
Variety of GTST wings, some slightly damaged - from €30
GTST Drivers amber indicators (x2) - €60 each
GTST Passenger amber indicator (x1) - DEPOSIT TAKEN
Reverse Lights (Pair) - €50
Reverse Light (LH) - €25
Rear Lights (no covers) - €75
Rear Lights (with Covers) - €100
Driver & Passenger Windows - €50 each
Rear Passenger Side Window - €30
Pair of doors (stripped) - €40 each
Genuine GTR Orange Front Fog Lamps - €200
GTR Projector Headlamps with HID bulb holders - SOLD
Enkei Altia N1 Alloys 8 & 9J (super rare) - €500

Interior:
Evo 2 Recaros (drivers bolster worn) - SOLD
R/S Body Drivers Recaro Rail - €150
R/S Body Passenger Recaro Rail - SOLD
Pillar Twin Gauge Pod - SOLD
Dash Tripple Gauge Pod - SOLD
Centre Dash Vent (slight crack) - €40
Centre Dash Vent (mint) - €75
Passenger Vent (mint) - €80
Dash (no vents) few holes from gauges - €50
Greddy (PAIR) Pillar Pods 52mm - €90
Impul 300km GTR/GTST Dash Clocks (18,800km) - SOLD
Deep Dish Steering Wheel & boss - SOLD
Most interior panels available now
C-Pillar Surrounds - SOLD
Radio/Gear Surround - SOLD

Electrical:
Silver Apexi AVCR - SOLD
Blitz Turbo Timer with r32 harness - €70
60mm HKS Boost guage - SOLD
50mm HKS Oil Temp guage - SOLD
60mm HKS Oil Pressure guage - SOLD
50mm HKS Water Temp Gauge - SOLD
greddy sandwich plate - SOLD
Z32 Nissan 300zx Z32 AFM Wiring Loom (OEM) - €40
12in Fans - €20
12in Fans (new) - €30 each

Engine/Drivetrain:
RB25DET Spec 2 - SOLD
RB25DET Gearbox - SOLD
RB25DET Gearbox Slave - SOLD
RB25DET Spec 2 loom for r32 skyline (properly wired) - SOLD
RB25DET R32 Custom Prop - SOLD
RB25DET Gearbox loom for r32 skyline - SOLD
RB25 Gearbox R32 custom Mount - €80
RB20DET Engine Mount (new) - SOLD
RB20DET Engine Mount (used) - €50
Japspeed short shifter - SOLD
300zx ecu mapped with nistune by stiv - SOLD
Exedy Stage 3 Clutch - SOLD
Nismo 4.3 LSD (2way i think) Diff - SOLD
5 bolt Shafts for above diff - €100
Apexi Cone Filter - SOLD
Large Front Mount Intercooler with pipework - SOLD
50mm alloy rad - SOLD
HKS Street Legan 3in Cat back exhaust - €250
5Zegin 3in decat - €100
3in elbox/downpipe - SOLD
GTR Fuel Pump - €120
Braided Fuel Lines throughout - SOLD
Sytec Fuel pressure regulator - SOLD
Tomei Fuel Pressure Gauge - SOLD
Sytec Billet Fuel Filter - €60
Apexi Exhaust Control Valve - SOLD
Budget Oil Catch Tank - €40
HKS SSQV - €120

Suspension:
Tein Drift Master Coilovers - SOLD
Adjustable front tension arms - SOLD
Kaber front tension arms (brand new) - €125
Adjustable front camber arms - SOLD
Adjustable japspeed steering arms & ends - €100
Adjustable rear camber arms - SOLD
Adjustable rear traction arms (shorter ones) - €70
Adjustable rear toe arms (long ones) (for use with s13 subframe) - €80 (new)
Conceptua Hicas Lockout kit - €100
Driftworks Hicas lockout kit with new bushes - €130
5 stud hubs, front and back - €300
Front knuckles/carrier with brand new kingpins just done - €150
Front Strut brace - €80
Rear Cusco Strut Brace - SOLD
Rear Generic Strut Brace - €50
Ultralite 25mm spacers - SOLD
Front lower arms with brand new ball joints fitted - €70 each


Braking:
R33 GTST Brakes front and rear - €450
Rear handbrake shoes, clips, etc - €100
Braided lines front and back - SOLD
Cusco brake stopper - SOLD

Shell - DEPOSIT TAKEN

[niall s14a]

Any photos of the gauges Andrew?

[AndrewR32]

can get tomorrow

[ste]

Front Camber arms suit r34?

[scottr89]

You have pm!

[AndrewR32]

https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/12295405_10156174796070408_1340657684878430091_n.j pg?oh=c91f889f1f31b03cf36509bcdcb80ca6&oe=56EEE71C
oil & water temp - 50mm
oil pressure & boost - 60mm

[murray sr22]

Il take nistune off Ya and is the clutch old or recently fitted and the elbow and down pipe after market

[AndrewR32]

Il take nistune off Ya and is the clutch old or recently fitted and the elbow and down pipe after market
clutch has done around 15,000 road km (easy driving). never tracked. bought from Drift2 Motorsport for around the 400 mark

elbow/downpipe is japspeed i think. its an all-in-1 unit

[murray sr22]

Well lad il take nistune and will let u no about the clutch and down pipe tomorrow where are you from

[thetangerine]

PM sent for the Gtr wings

[AndrewR32]

not turns out not a gtr diff.

[AndrewR32]

Well lad il take nistune and will let u no about the clutch and down pipe tomorrow where are you from

ennis, co. clare

[ste]

Front camber arms suit r34?

[AndrewR32]

not too sure to be honest

[AndrewR32]

list updated, parts added, prices adjusted where over/underpriced

[Andrew200sx]

il take the passengers recaro rail and japspeed shortshifter. do u kno if any of the rear arms u have will fit r33? txt me on 0862458232

[AndrewR32]

il take the passengers recaro rail and japspeed shortshifter. do u kno if any of the rear arms u have will fit r33? txt me on 0862458232
traction (short) arms will fit r33
driftworks and conceptua lockout kits will fit too

i'll keep you posted on all parts

[AndrewR32]

bump. car now being broken

[jay2412]

What brand intercooler. Condition??

[AndrewR32]

What brand intercooler. Condition??

not sure what brand until i get it removed. i'll let you know over next few days

[slithertooth]

How much for shell.

[AndrewR32]

How much for shell.

not for sale just yet, but pm me what you're after (bare, non rolling, partial suspension, etc)

[tomdh]

how much for the slave cylinder?

[AndrewR32]

how much for the slave cylinder?

going with the gearbox

[AndrewR32]

list updated, parts added

[Andrew200sx]

is the greddy sandwich plate genuine? and will it fit my spec 1 engine? what fittings has it got on it?

[Hachi]

What are the door seals like?

[AndrewR32]

is the greddy sandwich plate genuine? and will it fit my spec 1 engine? what fittings has it got on it?

genuine greddy yes, and yes, wil fit RB 20/25 and presume 26. it has both large and small threaded holes for different size connections

[AndrewR32]

What are the door seals like?

they're staying with the shell for now until i know what route im taking with it

[AndrewR32]

updated...

[AndrewR32]

list updated once again

[tomdh]

Pm'd you man

[dermo88]

Can u pm me a price for the shell? Either bare or with interior?

[tomdh]

Payment sent lad

[AndrewR32]

bump!

[AndrewR32]

updated

[AndrewR32]

updated

[AndrewR32]

deposit taken on shell. all interior parts now for sale

[AndrewR32]

bump. list updated and interior parts now available