Backyard Speed Shop r32

[hughesad]

So I've had this for about 15 months now, and since its about to under go some big changes I though I may aswell throw a project thread up

After I sold my S14 I went through a disastrous mx5 turbo, a big white forester sti, 2 ae111's and MANY other cars here and there till october 2013 when I picked up the r32

Spec when I bought her was

apexi cold air intake
hdi boost controller
walbro 355 fuel pump brand new
fully rebuilt head new valves and seals
large front mount intercooler
new timing belt pulleys and tensioners
new intake gasket and exhaust mani gaskets
new high flow fuel filter
new rocker cover and gaskets
s/s full exhaust system

interior
omp deep dish steering wheel
rare nismo 260km clocks
sony head unit

drivetrain
nismo short shifter
6 puck clutch
4:1 shimmed diff with castrol lsd oil
solid diff mounts
driftworks hicas lockout system

suspension
hks rear coilovers
tein super streets on front
cusco fully adjustable camber arms

exterior
gtr nur spec front bumper
gtr skirts and spats
gtr rear spoiler
gtr bonnet and grill
18" xxr 521 10s on the rear and 9.5 on the back
arches rolled and shulzed and cavity waxed

http://i1220.photobucket.com/albums/dd453/stevokr32/20130302_133053.jpg

http://i1220.photobucket.com/albums/dd453/stevokr32/20130407_122701.jpg

http://i1220.photobucket.com/albums/dd453/stevokr32/20130430_134849.jpg

http://i1220.photobucket.com/albums/dd453/stevokr32/20130519_170432.jpg

First things first I ditched the deep dish wheel and out a momo out of an old mx5 I had.

Then I got a set of r32 gtr seats and put them in . Massive improvement over standard seats imho.

Daily drove the car and about June 2014, decided to start accumulating goodies :)

Picked up this GReddy rhc6 turbo kit . it includes a manifold adaptor, external wastegate with screamer pipe, oil lines, and elbow as well as the turbo

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2014-10/IMG_20141029_193030_zpsw2uofm5n.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2014-10/IMG_20141029_193030_zpsw2uofm5n.jpg.html)

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2014-10/IMG_20141029_192929_zpsddms0fpi.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2014-10/IMG_20141029_192929_zpsddms0fpi.jpg.html)

The turbo's made my IHI Japan, who make kits for apexi and oem turbos for Subaru etc. Couldnt find much info online about it besides an add on JDM distro's site . They say its good for 400-450:happy) :happy) :D bt:)

To match the turbo i was going to build a forged rb25. I bought some HKS step 2 pistons off a seller on the Skyline owners club , but when they arrived they looked like this....:sick) :sick)
http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2014-08/IMG_20140802_134559_zpszuhwki0l.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2014-08/IMG_20140802_134559_zpszuhwki0l.jpg.html)

Packed as so ..

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2014-08/IMG_20140802_134131_zpsnhzwkpn8.jpg

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2014-08/IMG_20140802_134652_zpsvzr8gjod.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2014-08/IMG_20140802_134652_zpsvzr8gjod.jpg.html)


Got my money back after 1 month of arguing! What an idiot:wallbash)

Picked up an oem nissan radio and an apexi multichecker

http://a0.dmlimg.com/ZjhjZjhlY2EyMjE2NWUxNmU3ODdkYzc1ODY5ZjFiOGGc04Jw5W WXM3a8_DtjIK_VaHR0cDovL21lZGlhLmFkc2ltZy5jb20vODFh YTIyODg1ZWJjYTllODRhYWVmMmJhNGE3ZGU5YWVhMWY3MmY1ND llZTZkZTM1MzZmMWQ5NjJlMzIyNzc4OC5qcGd8fDUyNXx8fHx8 aHR0cDovL3d3dy5hZHZlcnRzLmllL3N0YXRpYy9pL3dhdGVybW Fyay5wbmd8fGh0dHA6Ly93d3cuYWR2ZXJ0cy5pZS9zdGF0aWMv aS9ub25lLWltYWdlLmpwZ3w=.jpg

Picked up some brembos off an evo vii with 330mm drilled disks for a song. Planning to sell the rears. Have ordered adaptors for my hubs of tfworks in the USA



http://cdn2.bigcommerce.com/server2800/43370/products/1041/images/2280/imgx_103__25386.1409742668.1280.1280.jpg?c=2

This is them fitted on an s14 in the states... I plan on painting mine black with oem sticker

Got some braided brake lines from HEL ( not my photo :))

http://www.prospeedracing.com.au/product_images/j/897/hel-braided-clutch-line-kit-helclutchlines-965-5949-lrg__26347_zoom.jpg

A braided clutch line

http://i.ebayimg.com/00/s/NDY3WDUwMA==/z/KLkAAOSwd4tT907X/$_35.JPG


Bought a big ass oil cooler with relocation kit and thermostatic sandwhich plate:nuts)

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-01/IMAG0144_zpseswbaxap.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-01/IMAG0144_zpseswbaxap.jpg.html)

Picked up a full Cusco cage aswell, Waiting on padding atm then painting it black to go with the look I want! No pictures atm though!

Picked up an rb23 of A mate from his r32. It uses bp mx5 pistons and is over bored from 78mm to 83mm each cylinder :happy) :happy)

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-01/IMAG0133_zpsxrhzpcpx.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-01/IMAG0133_zpsxrhzpcpx.jpg.html)

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-01/IMAG0140_zpslny8p15s.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-01/IMAG0140_zpslny8p15s.jpg.html)

Had to get 2 sets of rings as mx5s are 4 cyinder :wallbash) also got a set of acl rod bearings... thank god I work in a motor factors!

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-01/IMAG0143_zpssajfx6hq.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-01/IMAG0143_zpssajfx6hq.jpg.html)

Decided not to go with the rb23 now and will be buying an rb25neo from JDM Distro once my rb20 sells !

Picked up a set of 18x8.5 and 18x9.5 Te37s . GENUINE , not rota !:D

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-01/IMAG0148_zpszlx2hhyo.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-01/IMAG0148_zpszlx2hhyo.jpg.html)

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-01/IMAG0147_zpsu6jvvn8e.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-01/IMAG0147_zpsu6jvvn8e.jpg.html)

wheels will either be going black or dark matt bronze!

Thats all the progress on the car atm!

I have ALOT of stuff on route atm after blowing serious cash on parts since Chrsitmas... Ill post pics when they arrive bt:)

Car will be going into the workshop in 3 weeks time to begin the transformation :happy) :happy)

[seanie R.33]

Sweet 32!!

[lady89]

nice one! looking forward to more updates!

[Andrew200sx]

Serious looking 32 man, seen it in blanchardstown shopping center months ago.

[DSlide93]

Sweet r32 man :) can't wait to see the progress!

[adam 9]

Nice wheels .. Car was pretty class to start off with so should be nice to see done

[slithertooth]

This is going to be great!!
Lovely lovely , Stephen is probably still regretting letting this go

[Spartacus]

What happened the wheels that were on it when you got it? Looked perfect then.

[hughesad]

What happened the wheels that were on it when you got it? Looked perfect then.

Still have them!

Gonna sell them in a few weeks when I have the new wheels painted

[frankmcc]

Sweet skyline wanted it wen it wos for sale but wos laid up after a crash wos raging wen it wos sold haha

[noiseMaker_]

she's a beaut!!! <3 Car looks familiar, think I saw it few times at Euro and JDM. Anyhow look forward to see more of this lil gem! Best of luck with the build :)

[hughesad]

Thanks for all the positive comments guys!

Few bits arrived today ...


Solid steering column bush. This is designed to eliminate play in the column. The cars 22 years old so the poor rubber bush has seen better days at this stage .

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-01/IMAG0159_zpsyozjvikx.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-01/IMAG0159_zpsyozjvikx.jpg.html)

Braided clutch line :D

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-01/IMAG0160_zps0st3mti2.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-01/IMAG0160_zps0st3mti2.jpg.html)

Front polyurethane arb links and steering rack bushes

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-01/IMAG0161_zpswqin9h8t.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-01/IMAG0161_zpswqin9h8t.jpg.html)

An ASI aluminium radiator

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-01/IMAG0164_zpsv0j6evmr.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-01/IMAG0164_zpsv0j6evmr.jpg.html)

Still waiting on some more bits to arrive and ordered even more last night. This is starting to get out of hand:wallbash) :wallbash)

Hoping to get the car up to the workshop once the next batch of goodies arrive later this week !

Seats are next on the cards!

[hughesad]

So picked up some seats on Sautrday night, driving the bluebird to Bunclody , was ...ehm , an adventure! Got blasted in a snow storm on the way back (wtf:

They've 2 marks on one seat , which I'll be getting repaired. FIA approved and still in daybt:) Not that I need them to be in date but the FIA thing was important to me as I don't fancy using fake or non certified seats.

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-01/IMAG0216_zpsx57sv3dg.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-01/IMAG0216_zpsx57sv3dg.jpg.html)

Pictures make the marks look 1000% times worse.

Stickers arrived for my brakes and wheels

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-01/IMAG0212_zpsqev1wjoz.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-01/IMAG0212_zpsqev1wjoz.jpg.html)

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-01/IMAG0213_zpsxsze1jn4.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-01/IMAG0213_zpsxsze1jn4.jpg.html)

These finally showed up too :D :D :D

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-01/IMAG0210_zpsplga1jrn.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-01/IMAG0210_zpsplga1jrn.jpg.html)

Whiteline front and rear adjustable ARB's. with drop links and bushes. 28mm front, 26mm rear. Seen them and absolutely had to have them. With all the other suspension upgrades I should see a drastic improvement in the handling of the car when its back on the roadbt:)

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-01/IMAG0173_zpsbihdok7l.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-01/IMAG0173_zpsbihdok7l.jpg.html)

More goodies.

Front and rear lower control arm poly bushes.

Also ordered some nice bits off YAhoo auctions last night :nuts)

I'm now at a stage where I've only the engine left to purchase, so need to start shifting my own and my old wheels;) ... Oh and fit stuff, gonna start this weekedn :happy) :happy)

[jonnyrb]

Lovely r32, good to see it getting pampered!

[TheHumbleSteed]

Keep the updates coming :D

[hughesad]

Got an oem nissan radio bt:) bt:) I never listen to the radio in sport cars so Itll suit me perfect. Oem , subtle and black .. winning :)

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-02/IMAG0263_zpsr1oucmkt.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-02/IMAG0263_zpsr1oucmkt.jpg.html)

New rays wheel valves

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-02/IMAG0262_zps8mfo9ha9.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-02/IMAG0262_zps8mfo9ha9.jpg.html)

Finally got my brembo brake adaptors. These things are HEAVY and very thick steel, will have no issues trusting these anyway!

I did however get anally penetrated on Duty :(

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-02/IMAG0264_zpsq6id4tq9.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-02/IMAG0264_zpsq6id4tq9.jpg.html)

6 metres of padding for my cage. Don;t want to be banging my head of the cage or my legs

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-02/IMAG0265_zpsreph6sde.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-02/IMAG0265_zpsreph6sde.jpg.html)

Also got some sweet bits from Yahoo Auctions

An old school Apexi RSM

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-02/IMAG0266_zpsgzruik0b.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-02/IMAG0266_zpsgzruik0b.jpg.html)

Hks turbo timer

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-02/IMAG0268_zps7vky1gcr.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-02/IMAG0268_zps7vky1gcr.jpg.html)

HKS oil adn water temp gauges, with all sensors and wiring. I have a HKS boost gauge ATM so these should look well with that

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-02/IMAG0270_zps3o1gv124.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-02/IMAG0270_zps3o1gv124.jpg.html)

Sporty chequered mats , Ive always wanted a set :D

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-02/IMAG0271_zpst8rtkzuc.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-02/IMAG0271_zpst8rtkzuc.jpg.html)

Oh and heres my Apexi multichecker I got aaages ago

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-02/IMAG0272_zpsz13sqjpd.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-02/IMAG0272_zpsz13sqjpd.jpg.html)

Oh and I also got destroyed on customs with this too

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-02/IMAG0273_zps4k21go1w.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-02/IMAG0273_zps4k21go1w.jpg.html)

This arrived aswell

A Top secret style rear diffuer, Should look well with the black car and wheels

http://i1065.photobucket.com/albums/u384/adam_hughes1/Mobile%20Uploads/2015-02/IMAG0274_zpsllvmeazj.jpg (http://s1065.photobucket.com/user/adam_hughes1/media/Mobile%20Uploads/2015-02/IMAG0274_zpsllvmeazj.jpg.html)

[lukeb]

Nice work lad should go well when it's finished

[lady89]

now get all that stuff fitted and make more pics of them :D

[hughesad]

now get all that stuff fitted and make more pics of them :D

Strongly thinking of selling it and shifting on the parts atm :/

[topdog]

Id be interested in the plenum and a few bits if you are!

[derek89]

We're u get the diffuser dude?

[hughesad]

We're u get the diffuser dude?

http://www.epracing.co.uk/Aero-Kit/Nissan/Skyline/R33-GTR/R33-GTR-TS-Style-Diffuser/p-69-78-92-96-1212/