View Full Version : Diarmuid's 180sx project :)
Well I'm on this a while now so I said that I probably should get my Thread up over these winter evenings when i dont have the car to work on/enjoy as it's now away for paint.
So from the beginning:
On the 17/03/2014 (yes paddys day) instead of drinking my life away I headed an hour down the road to a man who nearly sounds like more of a culchie than me, Petko (Pepsterx). This was a big moment in my life, first jap car and first rwd. Yes petko you are responsible for coverting me as i was a huge VAG man :p
SPEC: 10/04/2016
EXTERIOR
Pearl purple
Full Works 9 kit
Kouki Tails and Carbon rps13 centre piece
Crystal side repeaters
Crystal bumper lights
25mm vented wings
50mm overfenders
Dmax bonnet vent
East Bear wing mirrors
326 Power roof spoiler
3 piece Origin Labs carbon fibre ducktail spoiler
Genuine Nissans wind deflectors
SUSPENSION & BRAKE'S
TEIN coilovers
Driftworks subframe polybushings
5 stud conversion
Brand new balljoints
Skyline front 4pot calipers and discs
Skyline rear 2pot calipers, discs and handbrake setup
Braided brake lines all round
Front strut brace
Cusco rear strut brace
WHEELS
Mansize Work Equips
Front: 18x10 et12
Rear: 18x12 et12
INTERIOR
HKS Turbo Timer
GReddy Profec S boost controller
Yashio Factory water temp guage/fan controller
Wooden 3 spoke steering wheel
Cusco dash Dodger cage
Bride Brix 1's on genuine bride rails
S15 dash and centre console
ENGINE AND DRIVETRAIN
1JZ-GTE (non vvt)
R154 gearbox
Custom driveshaft
HKS 256 camshafts
Sard 540cc injectors
Sard fpr
GReddy TD06H-20G turbo
Braided turbo lines
Front mount intercooler and custom stainless pipework
GReddy exhaust manifold, external wastegate and screamer pipe
Custom 3 inch downpipe
Apexi 3 inch exhaust system with 4 inch tip & custom shotgun exhaust also
A/C removed
Braided oil breathers
2 way diff (unknown)
Battery relocated to boot
[
slithertooth
29-10-14, 20:08
Haha, great introduction
I converted the spud chucker to them s body's so your in good hands, think he got his first 13,14,32,33 and 34 off me!!!!
Well ware buck
Haha, great introduction
I converted the spud chucker to them s body's so your in good hands, think he got his first 13,14,32,33 and 34 off me!!!!
Well ware buck
Haha Cheers man :)
Right so this is what i did from March 2014 upto now (October 2014) [gonna be picture heavy for this part]
[
So my car is away for painting right now, money came about and i started purchasing bits as you do!
Looks like a great build love the colour will be mad when built
Looks like a great build love the colour will be mad when built
Cheers man :) Can't wait to get it back, my one big regret so far is not taking out the engine and getting the bay done now aswell, but it can be done again sometime.
Lovely 180, wheels and kit are ace together.
Petko some man all the 180s hah
Andrew200sx
29-10-14, 22:43
great start to a thread....will be keeping an eye on this build. that colour is something else.
Lovely 180, wheels and kit are ace together.
Petko some man all the 180s hah
Thanks :) Gonna save for some mega dishy wheels next year. He sure is some man for one man :)!!
Cant wait to see it finished :) will look awesome :) That white 180 in those pics looks well 2. Wonder whos that is?? :P
Cant wait to see it finished :) will look awesome :) That white 180 in those pics looks well 2. Wonder whos that is?? :P
That makes two of us :P Ya it looks the part surely, oh i wonder haha :)
great start to a thread....will be keeping an eye on this build. that colour is something else.
Thanks Andrew, Hopefully its not too in your face and just turns out nice, worth a gamble :)
That makes two of us :P Ya it looks the part surely, oh i wonder haha :)
As far as I no I think it looks even better now ;)
As far as I no I think it looks even better now ;)
It does ya but no thread on that car yet is there? :P
michealkirwan
29-10-14, 23:11
You robbed my colour!!!:D
shhhh :P I haven't time 4 doin it. a girl has other priorities hahaha
You robbed my colour!!!:D
In my defense i have a purple s-body in my head years, picked the colour last july and its only being put into action now Micheal :p lol
michealkirwan
29-10-14, 23:16
lad i will say fair play mines a sunroof too and the pic with it up from the back looks class, might go road legal, definitely getting pics together when theyre done if ever haha
lad i will say fair play mines a sunroof too and the pic with it up from the back looks class, might go road legal, definitely getting pics together when theyre done if ever haha
Ya i like the sunroof :) yea pics will have to be done :D haha
Gona be savage Diarmuid. Can't wait ta see it painted. We'll have some ball of sbodies around next year!!
Gona be savage Diarmuid. Can't wait ta see it painted. We'll have some ball of sbodies around next year!!
Thanks Noel :) yep a big photoshoot will surely have to be done next year!! :)
D-turbo-lad
30-10-14, 00:06
cant wait to see it painted and put togeather . was a great little car to start with !!!
cant wait to see it painted and put togeather . was a great little car to start with !!!
Thanks Gav :) Will be calling to Petko's with it and lucozade when i have it back lol :p
noiseMaker_
30-10-14, 00:27
Nice to see another class project going. Fair play for all the work ya have done so far, looks great! Looking forward to see pics of it painted, it's going to look UNREAL ! <3
D-turbo-lad
30-10-14, 00:39
Thanks Gav :) Will be calling to Petko's with it and lucozade when i have it back lol :p
no the boss man is off the jungle juice for a while bring fizzy water tho lol
Nice to see another class project going. Fair play for all the work ya have done so far, looks great! Looking forward to see pics of it painted, it's going to look UNREAL ! <3
Thanks bud :) will update as soon as it's together :)
no the boss man is off the jungle juice for a while bring fizzy water tho lol
Oh i'll not ask questions lol that'll do :)
Saw the car at Tynagh, it will be savage once the bodywork is all done, well ware...
Saw the car at Tynagh, it will be savage once the bodywork is all done, well ware...
Cheers man :)
Well ware, Will be some car when finished..
Some amount of sbodies in the west at the moment!!
Well ware, Will be some car when finished..
Some amount of sbodies in the west at the moment!!
Thanks Billy! Ya they are popping up all over the place :)
michealkirwan
30-10-14, 10:12
Wheras in kilkenny ive 4 friends with celica gt4s another friend with a 400 brake evo 4 and me the only one with a nissan!
Wheras in kilkenny ive 4 friends with celica gt4s another friend with a 400 brake evo 4 and me the only one with a nissan!
And sence! :P haha
michealkirwan
30-10-14, 15:20
so true billy so true!
yomamagoes/sideways
30-10-14, 15:30
nice car man likin wha ur doin with it
Such a henhouse :p should look the business when it's done man
nice car man likin wha ur doin with it
Thanks :) many more plans once funds allow
Such a henhouse :p should look the business when it's done man
Haha cheers buddy :)
Pic's from Tynagh
https://scontent-b-lhr.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/p480x480/10533253_489807467820460_5417599381836415833_n.jpg ?oh=0bf57f3ec5dfefe60e657e92e593dd81&oe=54F7000D
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/p480x480/10500541_489807461153794_683913032775793371_n.jpg? oh=906d608335fb55ceb9068aad4346abc8&oe=54E9ED49&__gda__=1425152827_1a33df7aeeb227830ef3c04abaf4c7f 2
Pic's from Tynagh
https://scontent-b-lhr.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/p480x480/10533253_489807467820460_5417599381836415833_n.jpg ?oh=0bf57f3ec5dfefe60e657e92e593dd81&oe=54F7000D
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-
9/p480x480/10500541_489807461153794_683913032775793371_n.jpg? oh=906d608335fb55ceb9068aad4346abc8&oe=54E9ED49&__gda__=1425152827_1a33df7aeeb227830ef3c04abaf4c7f 2
Nice one thanks :)
So i went on friday to have a look at the progress on the bodywork...The waves are nearly gone out of the fiberglas now :)
Jesus that looks like a lot of filler! Think some of the best lads use Dolphin Glaze on fibreglass panels to take ripples out.
Car looks good though pre disassembly, nice to see road cars getting the treatment.
T
Jesus that looks like a lot of filler! Think some of the best lads use Dolphin Glaze on fibreglass panels to take ripples out.
Car looks good though pre disassembly, nice to see road cars getting the treatment.
Ya i heard that before, must tell the panel beater that part though. Thanks for the feeeback :)
noiseMaker_
03-11-14, 13:29
Its getting there, slowly but surely :) Bet ya getting all impatient there as all of us on here ha
Its getting there, slowly but surely :) Bet ya getting all impatient there as all of us on here ha
The wait is a killer :(!
The deadline was japfest this year but i guess it'll hopefully be there next year :) haha!
So I picked up the mirrors from Tom (Tomdotcom) last week, sound lad :)!
Got a mate to tint my quarter windows tonight, will do boot/hatch window when car is back from paint :)
Car is ready for primer so hopefully there will be more updates in a few weeks as long as my painter doesnt get busy it'll be back to me asap :D
Nice work lad
Cheers Luke :)
Received my Dmax roof spoiler from Drift Bits yesterday , great service!! Thanks Stevo :D
[
Good man Diarmuid. Looking Well!
Good man Diarmuid. Looking Well!
Cheers Tom and nice one for the mirrors :)
I went and got a wee Dmax roof spoiler off Stevo at Drift Bits last week, more updates soon :)
So the car is now in primer and I'm hoping for it to be in paint this coming week :)
Brendanfd3s
03-01-15, 00:16
should look mint dude love the colour
Andrew200sx
03-01-15, 00:23
will be coming along in no time now....any other updates on the paint. wana see what it turns out like. the car should look nice on the lowenharts :D.
should look mint dude love the colour
Hopefully man :) thanks for the feedback
will be coming along in no time now....any other updates on the paint. wana see what it turns out like. the car should look nice on the lowenharts :D.
No man thats as far as it is now, should be back in my garage by the time the wheels arrive hopefully :)! This waiting game is a killer and i am praying the colour and wheels compliment eachother :D
Colour looks serious . Gonna look great WHEN its painted haha
Jaysus lad he has the car long enough for it to be painted by now! A piss take that fella
Jaysus lad he has the car long enough for it to be painted by now! A piss take that fella
Ya getting fairly anxious now to be honest man :(! No panic for her seeing road until april anyways but ive plenty i can be doing with her when she's back.
Ino what ya mean if that was me I'd want it back lol
Soon be done??
Ya man hoping and looking at havin it home this week :)
That's the job man mine shouldnt be much further behind ya
That's the job man mine shouldnt be much further behind ya
Sweet is it painted? Or what stage is it at? :)
The amount of freshly painted sbodies in the west this summer is unreal!!
Mine should be done soon too!! :D
Can't wait billy. Photo shoots gona be on overdrive. Preped for paint, starting next week I think. Should have it back in about 2 ta 3 weeks
Going to be absolutely nuts!!
Cant wait aswell, be class!!
Yeh the wild west is full of them :) a mate of mine from claremorris bought that brown one that was in dublin for sale a few weeks ago :) photo shoots galore lads!!
Ya so we may all gather and start lining up dates and pray for good weather for pics :)
Let's get the cars back on d road first lol.
D-turbo-lad
14-04-15, 16:48
very good plan ! is it painted yet ??
very good plan ! is it painted yet ?? ��
Lookin at havin it back this week gav :)
Thanks man :)
Quick update, car is coming home next weekend from body shop regardless of whether it's painted or not. He has fucked me around for the past 10 months with false hope, constant lies and just complete bullshit so now it's my turn to do it to him :D
No way man? He has plenty of time for bike runs tho the tosser lol
No way man? He has plenty of time for bike runs tho the tosser lol
Ya man he can paint diggers, tractors, cars, ride his bike and paint everything else the past 10 months bar my car!
About time you've taken this attitude man. Ya shoulda been like this 6months ago!
About time you've taken this attitude man. Ya shoulda been like this 6months ago!
Yea I know buddy :). You learn from your mistakes though noel :)
Dillon.g.428
05-05-15, 22:16
Ya man he can paint diggers, tractors, cars, ride his bike and paint everything else the past 10 months bar my car!
Every man loves a nice lookn Tractor with a digger on the back :p.. Good thing take time :) hope its done tho all the same had a nice wait haa
delsolcrx1
07-05-15, 14:07
How much did you pay for them and where did you get them from out of interest?
How much did you pay for them and where did you get them from out of interest?
Sourced them from up garage japan
seats look mint :)
Thanks larz :) one of them are pretty much new duno if it was ever in a car its that clean and the other needs a quick valet but nothing major. No rips, tears or any sort of wear on either of the two.
Every man loves a nice lookn Tractor with a digger on the back :p.. Good thing take time :) hope its done tho all the same had a nice wait haa
Haha ya dillon trust you to be sneering me lol! Hopefully now, Saturday is d-day and will tell a tale :D
Seats look well dude :) should look well in da car :) well wear
Spec on 1st page updated as of how the car stands now
saw this all over Facebook sorry to hear lad , at least it will look well when finished
saw this all over Facebook sorry to hear lad , at least it will look well when finished
Thanks man, debating on whether to wait a while to finish it or just bite the bullet and get it done now.
I heard a lot of story's about him man and not made up ones! It will all come to an end very soon for him anyways! Just couldn't be sayin much on FB as it wasn't my place lol
Thanks man, debating on whether to wait a while to finish it or just bite the bullet and get it done now.
I'd bite the bullet and get it done man. At least then you can forget the past. Otherwise it'd be very easy lose interest.
I heard a lot of story's about him man and not made up ones! It will all come to an end very soon for him anyways! Just couldn't be sayin much on FB as it wasn't my place lol
Ya luke i know what yeah mean. Sure what goes around comes around as they say.
I'd bite the bullet and get it done man. At least then you can forget the past. Otherwise it'd be very easy lose interest.
You could be right Eoin just have to see if i can sell a few bits to let funds allow for it.
murray sr22
11-05-15, 21:32
same to see lad i had the same hassle with the paint job on my twincam lad was a disaster ended up taking it back and having to get some1 else to do it its a awful kick to the stones that ya cant just trust a man to do a job like
sure might swell go all out, pull engine fix the bay paint it up tuck wiring etc etc make it worthwhile :)
same to see lad i had the same hassle with the paint job on my twincam lad was a disaster ended up taking it back and having to get some1 else to do it its a awful kick to the stones that ya cant just trust a man to do a job like
You know my pain so , yeah a horrid kick in the stones surely and this went on for ten months
sure might swell go all out, pull engine fix the bay paint it up tuck wiring etc etc make it worthwhile :)
Ah i dunno, i was thinkin of doin the engine bay afterwards when i go doing engine mods next winter :)
Andrew200sx
04-06-15, 22:08
nice to see its back on track and with a panel beater u can trust, and didnt end up for sale or broken down for parts. its all a bit too common to see people stuff get destroyed by so called pannel beaters. i will be keeping an eye on the build man.
nice to see its back on track and with a panel beater u can trust, and didnt end up for sale or broken down for parts. its all a bit too common to see people stuff get destroyed by so called pannel beaters. i will be keeping an eye on the build man.
Thanks man appreciate it :)! Yeah so so common nowadays and it's sad to see all these lovely cars bein broke for parts I couldn't do it I don't think.
Another progress report 😊
Bay is sprayed and will be getting another coat today before engine goes in to her tomorrow
http://i1378.photobucket.com/albums/ah90/diarmuid_omalley/Mobile%20Uploads/43756874-AD37-496E-B3D2-ABDE14307653_zpsbrftohcn.png (http://s1378.photobucket.com/user/diarmuid_omalley/media/Mobile%20Uploads/43756874-AD37-496E-B3D2-ABDE14307653_zpsbrftohcn.png.html)
Finally progress :)
Yeah man happy days
michealkirwan
21-06-15, 00:53
over the moon for ya lad!
over the moon for ya lad!
Cheers man it only took 11 months lol
Andrew200sx
09-07-15, 11:32
good to see that u have a great panel beater with a good passion to work, sending you snapchats of the work that hes going on the car. on another note, that color purple is something else. cant wait to get see pics of it fully painted.
good to see that u have a great panel beater with a good passion to work, sending you snapchats of the work that hes going on the car. on another note, that color purple is something else. cant wait to get see pics of it fully painted.
Thanks man :) yeah he's happy at his work which is always a bonus and it means he can take pride in his work too. Second time lucky i guess with the panel beater side of things :)! Yeah I'm so excited to see the finished result and can't wait to get her home to my shed so i can finish her off. Well when i say finish I don't mean completely because let's be honest they're never finished lol :)
Andrew200sx
21-07-15, 22:10
i actually like the mat finish on it at the minute.
i actually like the mat finish on it at the minute.
Yeah it was different Andrew :) was chatting painter earlier and he was worried at the start as every time he looked at it, it was a different shade but it was the way it was drying lol
I'm liking it dude, be able to spot the car a mile away now ha
I'm liking it dude, be able to spot the car a mile away now ha
Thanks man :) haha yeah it'll be hard missed alright ha
Can't wait t see her all finished up hoss - she guna look saweeeeet :)
Colour is unreal. Be something that will definitely stand out.
Can't wait t see her all finished up hoss - she guna look saweeeeet :)
Yeah man I'm buzzin to get it home! Hopefully next few days :)
Colour is unreal. Be something that will definitely stand out.
Thanks bud, be easy seen surely ha ha :)
Hot dang! Good progress dude
Hot dang! Good progress dude
Thanks Noely :) getting there now, hopefully only hours/days away from collecting it
Fair dues man, its a credit to you. Glad you persevered with it. Have you centre caps for the wheels? Any more plans?
Fair dues man, its a credit to you. Glad you persevered with it. Have you centre caps for the wheels? Any more plans?
Cheers dude! Yeah it's been a long year of torture but it made it through. Yeah centre caps are there just slipped my mind to put them on after a long weekend of building up the car. Ah nct is next but that should be no problem. Apart from that i just wanna enjoy her now and maybe look at power mods later on when funds build up again
Looking well man!
Cheers man :) not finished yet ha
That colour is unreal. Its looking very well now
That's savage dude, I miss my purple sil80 now ha
The more I look at it the more I love it man. You just raised the bar
That colour is unreal. Its looking very well now
Cheers for the feedback man :)
That's savage dude, I miss my purple sil80 now ha
Thanks bud, some tidying to be done on her but she'll get there.
The more I look at it the more I love it man. You just raised the bar
Same as that Noeleen thanks needs flattened and buffed up again to really bring out the colour but all in all i just fell in love with her properly this time lol. Don't know if I'm raising bars, but thanks all the same buddy :)
So i had the car up for a sale for a while and had a few viewers all who were disappointed with the paint work and I don't blame them because what was supposed to be a top notch job turned into another nightmare!! Reactions, blisters, runs, orange peel, you name it the car has it, none of which shows up in pictures so the man thinks he's done a great job altogether and doesn't want anything to do with the car now and won't listen to the fact the job was completely shite!
But anyways respray no.3 is coming next year all going well, but first i wanna get some more power out if the car and enjoy it a little bit.
So the plan is...
Cosworth steel headgasket
Brian Crower Valve springs
Tomei poncams
Tomei rocker arm stoppers
Get some head work done in an engine rebuild shop
Then onto the bolts on's which will include...
Walboro 255 fuel pump
Sard 550cc injectors
Z32 afm with HPI filter and alloy intake/suction pipe
Nistune or power fc (looking like it's gonna be a nistune)
Turbo is looking like either a hks gt-ss or a Garrett gt2860r... Opinions welcome on turbo selection? :)
I'm also replacing the top and rear gearbox seals
Fitting an alloy rad and electric fans setup
Fitting a greddy profec s boost controller
Changing fluids also.
Alot of this work is taking place at Petkos (Pepsterx) as I'm away in Canada/America on a work trip.
martycturbo
15-11-15, 21:12
Good to see you are getting the paint sorted,, like the whole look of this car and colour,, finish was letting it down just,,
Are you going with the same colour? ? I'd say ur not a happy man with the painters. U have a nice list to get through as well. Keep it up dude
Good to see you are getting the paint sorted,, like the whole look of this car and colour,, finish was letting it down just,,
Yeah I'll be sorting it after I do the power upgrades and get it mapped. Thinking about a full bn blister kit and then re paint whole car too obviously :)
Are you going with the same colour? ? I'd say ur not a happy man with the painters. U have a nice list to get through as well. Keep it up dude
Don't know what colour to go with yet, it'll be well into next year when i start thinking about painting and colours :) all i know for sure now is the power upgrades are being done and i have most of the parts got already. Just need advice on a turbo if anyone can help..
Didn't realise it's this hard to get a good painter and what are the chances of getting messed around twice :/
Lovely looking car, pity you got messed around with the painting though! But your plan sounds good, get those power mods in and enjoy it!
In relation to turbo, there was a Garrett gt2860r in my 180 and id highly recommend it, it made 276bhp on wcp's dyno and it wasnt mapped at that stage running 0.9 bar boost. I had injectors, pfc, z32 afm and all there ready to go in but i sold the car before getting around to it. Would love to have finished it off and mapped it :(
Lovely looking car, pity you got messed around with the painting though! But your plan sounds good, get those power mods in and enjoy it!
In relation to turbo, there was a Garrett gt2860r in my 180 and id highly recommend it, it made 276bhp on wcp's dyno and it wasnt mapped at that stage running 0.9 bar boost. I had injectors, pfc, z32 afm and all there ready to go in but i sold the car before getting around to it. Would love to have finished it off and mapped it :(
Cheers man :)
Yeah what are the chances of being let down twice lol has cost me a small fortune at this stage. So yeah I'm gonna get the power mods done and enjoy it for a while and sort paint out later on.
Did the turbo spool up extremely quickly with zero lag? :) sounds impressive alright. I'd be hoping for 360-370 with all those mods but we'll see what happens i guess.
Cheers man :)
Yeah what are the chances of being let down twice lol has cost me a small fortune at this stage. So yeah I'm gonna get the power mods done and enjoy it for a while and sort paint out later on.
Did the turbo spool up extremely quickly with zero lag? :) sounds impressive alright. I'd be hoping for 360-370 with all those mods but we'll see what happens i guess.
Yeah man zero lag! It was sick!! :D So much fun to drive in comparison to the standard turbo/boost settings. Its a great road car setup, the boost comes on so fast, you'll enjoy every second of it! I dont know what the max rating for the gt2860r is though so maybe check that out first.
Id say a boost controller isn't entirely necessary, would be nice to have one but i just had a hks adjustable actuator and once the boost was set at 0.9 we left it as is.
Alloy rad and electric fans are a great choice too, coupled with decent gauges inside to keep an eye on temps, the money saved from the boost controller id put towards a thermostatic oil cooler.
Have you added a fuel pressure regulator to your list too? :D
Yeah man zero lag! It was sick!! :D So much fun to drive in comparison to the standard turbo/boost settings. Its a great road car setup, the boost comes on so fast, you'll enjoy every second of it! I dont know what the max rating for the gt2860r is though so maybe check that out first.
Id say a boost controller isn't entirely necessary, would be nice to have one but i just had a hks adjustable actuator and once the boost was set at 0.9 we left it as is.
Alloy rad and electric fans are a great choice too, coupled with decent gauges inside to keep an eye on temps, the money saved from the boost controller id put towards a thermostatic oil cooler.
Have you added a fuel pressure regulator to your list too? :D
Ehh so i have most of the parts on my list bar an ecu and turbo. And I didn't know if I'd need a pressure reg or not? :)
Turbo sounds good to me, i must look up what it maxes out at though you're right!
Yeah i just bought a GReddy profec s last week lol so boost controller sorted :)
After all this i need to source some nice old style GReddy gauges :) already have a GReddy boost gauge, so oil temp and pressure and water temp to match would be nice :)
If ya looking for a good sprayer I'll bring ya up as far a stephen who done my car.
The job speaks for itself!!
I have 180sx with a HKS GTRS with a .64 housing, 555cc Nismo Injectors, z32 afm, FMIC, Walboro, full exhaust and all the usual bits and bobs. The car made 306.9 bhp & 257.3 Ftlb @ 1.0 bar & 355.6 bhp & 341.9 Ftlb Torque @ 1.2bar. It reaches full whack at 4300 rpm. It is fun to drive and i dont really take much notice of the lag. It was mapped on a Nistune by AP-Performance.
I can PM you the print out if you want.
Would ya not get John mcgettric to paint it man?
Ehh so i have most of the parts on my list bar an ecu and turbo. And I didn't know if I'd need a pressure reg or not? :)
Turbo sounds good to me, i must look up what it maxes out at though you're right!
Yeah i just bought a GReddy profec s last week lol so boost controller sorted :)
After all this i need to source some nice old style GReddy gauges :) already have a GReddy boost gauge, so oil temp and pressure and water temp to match would be nice :)
Ah cool you already have the boost controller! Your shopping list is pretty close to being sorted so :)
I think the fpr is a good idea as its not too expensive, maybe not entirely necessary but for the sake of €150. Best speak with who your getting to map it to see what spec the recommend going with to suit the ecu/turbo setup.
Also just for reference, heres the dyno graph i had from wcp
http://33.media.tumblr.com/tumblr_m6cdflSCb41r92zkk.jpg
I have 180sx with a HKS GTRS with a .64 housing, 555cc Nismo Injectors, z32 afm, FMIC, Walboro, full exhaust and all the usual bits and bobs. The car made 306.9 bhp & 257.3 Ftlb @ 1.0 bar & 355.6 bhp & 341.9 Ftlb Torque @ 1.2bar. It reaches full whack at 4300 rpm. It is fun to drive and i dont really take much notice of the lag. It was mapped on a Nistune by AP-Performance.
I can PM you the print out if you want.
Sounds good man, was chatting Stiv at MDT who will be mapping it and he has recommended a Garrett GT28060r :) he said with all the other supporting mods it should make 360/370bhp no problems at all. :)
Waiting until 4300 for full whack I couldn't deal with after mapping and spending money on it, but thats my opinion.
Would ya not get John mcgettric to paint it man?
Yeah Luke I should have gone to him August last year but love and learn I guess! I'd say I'll be visiting him next year with the car :)
Ah cool you already have the boost controller! Your shopping list is pretty close to being sorted so :)
I think the fpr is a good idea as its not too expensive, maybe not entirely necessary but for the sake of €150. Best speak with who your getting to map it to see what spec the recommend going with to suit the ecu/turbo setup.
Also just for reference, heres the dyno graph i had from wcp
http://33.media.tumblr.com/tumblr_m6cdflSCb41r92zkk.jpg
Sweet man, nice climb with just a turbo and actuator upgrade :)
Yeah so after further talks with Stiv at MDT who will be mapping the car and supplying the nistune ecu, he has recommended a Garrett GT2860r turbo to go with my mods and said an fpr isn't necessary:)
Sounds good man, was chatting Stiv at MDT who will be mapping it and he has recommended a Garrett GT28060r :) he said with all the other supporting mods it should make 360/370bhp no problems at all. :)
Waiting until 4300 for full whack I couldn't deal with after mapping and spending money on it, but thats my opinion.
http://i737.photobucket.com/albums/xx13/grealisraymond/10460817_1059566960736824_379791827807029162_n_zps w44msow9.jpg (http://s737.photobucket.com/user/grealisraymond/media/10460817_1059566960736824_379791827807029162_n_zps w44msow9.jpg.html)
Thats the print out for mine anyway, thinkin of adding cams over christmas to get a bit more at the top end. What boost are you going to be running?
http://i737.photobucket.com/albums/xx13/grealisraymond/10460817_1059566960736824_379791827807029162_n_zps w44msow9.jpg (http://s737.photobucket.com/user/grealisraymond/media/10460817_1059566960736824_379791827807029162_n_zps w44msow9.jpg.html)
Thats the print out for mine anyway, thinkin of adding cams over christmas to get a bit more at the top end. What boost are you going to be running?
Probably 1.2/1.3bar, not too sure to be honest man
I'd say excitement is an understatement now. Some nice goodies alright
I'd say excitement is an understatement now. Some nice goodies alright
Yeah looking forward to getting it all done now :)
Nice one man!
Cheers pal :)
Tis coming along nicely man! :)
Tis coming along nicely man! :)
Getting there now, looking forward to having it back and getting it mapped :)
Your a bad man ha ha. Thing is going to be mental. What turbo is on it??
Your a bad man ha ha. Thing is going to be mental. What turbo is on it??
Hahaha bad as in good? lol
Its a GReddy TD06 20g with external wastegate and screamer pipe :)
Definitely a good bad ha ha. External wastegate and screamer pipe will sound unreal dude.
Definitely a good bad ha ha. External wastegate and screamer pipe will sound unreal dude.
Haha fair enough! Yeah they should sound mental man haha! Can't wait to get cracking on it now :)
just seen these updates now, nice engine choice for the conversion! haha. ;)
just seen these updates now, nice engine choice for the conversion! haha. ;)
Yeah should be fun when it's finally done man :)
just seen these updates now, nice engine choice for the conversion! haha. ;)
Yeah should be fun when it's finally done man :)
Spec list as of today updated on page 1 :)
Spec list as of today updated on page 1 :)
I love seeing spec on the first page! a small thing but it gives a good feel for the time and effort gone in
I love seeing spec on the first page! a small thing but it gives a good feel for the time and effort gone in
Yeah for sure Larz :) shows the time and effort and might make people read on through the thread also lol :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.