Log in

View Full Version : Offset for 180sx Q's



Prodrifter86
27-05-14, 13:26
Hey guys i wanting to pick up a set of wheels for my 180sx (on standard rear quarters) i have Measured the offset on the wheels i have and i think they came out at 17x9.5 et 20..... i see wheels im looking at in et20 but 9j? has anyone have pictures of there own car on a 17x9 et 20? i want the wheels to sit right on the arches and look pretty cool.... any help would be appriecated....

Keith_200SX
27-05-14, 13:49
I'm in the process of playin with offset to,
This is a rear 17x10 et 5

http://i1195.photobucket.com/albums/aa389/keith_haugh/Mobile%20Uploads/B5B53FDB-4BA2-4D84-A828-FFD616CB495E_zpsqyvj5r9n.jpg (http://s1195.photobucket.com/user/keith_haugh/media/Mobile%20Uploads/B5B53FDB-4BA2-4D84-A828-FFD616CB495E_zpsqyvj5r9n.jpg.html)

And this is a front wheel 17x9 et15
Nice tyre stretch and minimal camber it'll be perfect

http://i1195.photobucket.com/albums/aa389/keith_haugh/Mobile%20Uploads/4D844C8B-F965-418C-AD9C-50C1F7F248D0_zpskbpnptpe.jpg (http://s1195.photobucket.com/user/keith_haugh/media/Mobile%20Uploads/4D844C8B-F965-418C-AD9C-50C1F7F248D0_zpskbpnptpe.jpg.html)

subzero
27-05-14, 16:23
std rear hubs and calipers ??

PepperS13
27-05-14, 16:42
Will fit dead on . Roll arches and put 15mm spacer on also :), I had 18x10 et24 with a 225/40 tyre on rear a mine and just rolled the inside lip

thegosson
27-05-14, 18:50
That second picture is of the rear too, is it not?

Keith_200SX
27-05-14, 19:41
std rear hubs and calipers ??

Yep 4 stud!
Second pic is a front wheel,

subzero
28-05-14, 00:58
When i had std 180 hubs and brakes, i ran viennas 9.5 +5 , very stretched tire, just a rolled arch on the rear. Had an 8.5 on front with a plus 24 or so (was still some room for a little more)

Driftma
29-05-14, 00:08
I've had 17x9j et12 with a 25mm bolt on spacer on the front with standard lca's and 17x9j et12 on the rear with a flare with no problems