PDA

View Full Version : Painters help needed!! silicones problem!!!



nikkisixx69
03-02-14, 18:41
ok so back from the workshop from another wasted painting session, my problem is im having a big problem with silcones (fish eyes) on the New origin overfenders i bought.

so this is what ive done so far and im still having the problem

session 1

-sanded overs
-prep wiped
-primered
-rubbed down
-prep wiped
-painted

nearly instantly doing the first coat (after the light coat) silcones appeared, especially badly on one of the overs

session 2

paint was mixed this time with Silicone stopper

-sanded down the paint to flatten out the silicones , still had paint on most of the overs after
-washed with washing up liquid (supposedly brilliant for stripping any waxes etc)
-prep wiped
-painted

and again it happened instantly, i could actually see the paint bubbling in front of me :/


my question is, what the hell can i do to stop them!! should i just lightly rub down the paint that is on now and just layer on more paint till they are gone altogether?

johnmaloney88
03-02-14, 18:45
are you going direct from the compressor? any filter or anything?
and don't let the panel wipe dry wipe one with one cloth, wipe off straight away with another.

Duck Drift
03-02-14, 20:53
Wet rub only thing that gets rid of reactions or maybe good coat of primer, but once had a spurious spoiler for
A passat that had to skim the hole thing with filler to stop reactions

nikkisixx69
03-02-14, 21:14
are you going direct from the compressor? any filter or anything?
and don't let the panel wipe dry wipe one with one cloth, wipe off straight away with another.

you see, ive painted wings , skirts and a front bumper and have had no problem so i dont think its a compressor issue, i even painted the skirts after the overs on the same day and no issue! thanks for the input tho man


Wet rub only thing that gets rid of reactions or maybe good coat of primer, but once had a spurious spoiler for
A passat that had to skim the hole thing with filler to stop reactions

had a good coat of primer! maybe will need more tho

pole drift
03-02-14, 21:14
There's an anti-silicone you can add to the paint

nikkisixx69
03-02-14, 21:15
There's an anti-silicone you can add to the paint

if you read the OG post dude you will see i used that joe!

johnmaloney88
03-02-14, 21:25
ya if you've painted other parts with no problem then it's the panel. you might consider barcoating it.

pole drift
03-02-14, 21:26
if you read the OG post dude you will see i used that joe!
I cant read

martycturbo
03-02-14, 22:20
fire up a pic to we see,, is your compressor close to where you are painting?? they exhaust a lot of oil vapour,,

nikkisixx69
03-02-14, 22:42
fire up a pic to we see,, is your compressor close to where you are painting?? they exhaust a lot of oil vapour,,

compressor is in another room! ill see if i have a pic! as previously said, ive painted everything else with no issues

martycturbo
03-02-14, 22:48
compressor is in another room! ill see if i have a pic! as previously said, ive painted everything else with no issues
ah well that rules that out<< have you bled it lately and do you have a water trap,,
even with my one fitted at the bodyshop I used to get the odd re-action, more so with white for some reason, fitted a wee filter at the gun also and that stopped all,,
http://i.ebayimg.com/t/Spray-Gun-Air-Line-Mini-Filter-Water-Trap-/08/!Bk!vGU!Bmk~$(KGrHqQH-CIEs7hR1%2Bd1BLV0Z,PR-Q~~_35.JPG

nikkisixx69
03-02-14, 23:04
ah well that rules that out<< have you bled it lately and do you have a water trap,,
even with my one fitted at the bodyshop I used to get the odd re-action, more so with white for some reason, fitted a wee filter at the gun also and that stopped all,,
http://i.ebayimg.com/t/Spray-Gun-Air-Line-Mini-Filter-Water-Trap-/08/!Bk!vGU!Bmk~$(KGrHqQH-CIEs7hR1%2Bd1BLV0Z,PR-Q~~_35.JPG

i know your an excellent painter dude, but im pretty sure it aint the compressor or lines etc. like i painted sideskirts directly after the first reaction on the overfenders, same paint and all, and the skirts came out perfect! it has to be the panel

martycturbo
03-02-14, 23:23
its a pain in the ass,, just trying to rule out the obvious things,, most silicon re-actions I come across are from trim restorers and tyre shines etc on the pannel,, but the washing liquid, wet sanding and panel wipe that you've done normally get rid of it,,
read through what you've done again there with prep,, sounds perfectly ok,,

nikkisixx69
04-02-14, 00:01
its a pain in the ass,, just trying to rule out the obvious things,, most silicon re-actions I come across are from trim restorers and tyre shines etc on the pannel,, but the washing liquid, wet sanding and panel wipe that you've done normally get rid of it,,
read through what you've done again there with prep,, sounds perfectly ok,,

tis a pain in the balls! and i thought the anti-silicone stoppers would do the trick today but nope! does it make any difference that the panels were new?

ELV-iS
04-02-14, 14:59
tis a pain in the balls! and i thought the anti-silicone stoppers would do the trick today but nope! does it make any difference that the panels were new?

there's silicone in the fibreglass mould release agent from what i read on the internets

had the same issue on a mates car a couple months ago with new quarters - sprayed primer - fish eyes - wiped it off with thinner on a rag a few minutes later - panel wiped again - primed again fish eyes again - thinner on a rag again to take the primer off.. we then scotched the whole thing again dipping scotch into panel wipe - panel wiped normally again and it was grand then....

I'm surprised you're getting fish eyes in the paint but you didn't when you primed ?

Something must have come into contact with the primed surface - maybe you were touching the back of the panel with a rag you're wiping the painting surface with and there's silicones on it?

nikkisixx69
05-02-14, 10:17
there's silicone in the fibreglass mould release agent from what i read on the internets

had the same issue on a mates car a couple months ago with new quarters - sprayed primer - fish eyes - wiped it off with thinner on a rag a few minutes later - panel wiped again - primed again fish eyes again - thinner on a rag again to take the primer off.. we then scotched the whole thing again dipping scotch into panel wipe - panel wiped normally again and it was grand then....

I'm surprised you're getting fish eyes in the paint but you didn't when you primed ?

Something must have come into contact with the primed surface - maybe you were touching the back of the panel with a rag you're wiping the painting surface with and there's silicones on it?

It can't be the rag man as im using individual prep wipes, so they only get used once! Im going to prime again, should I just prime over existing surface or should I strip it back to the gel coat?

drift180
31-03-14, 21:56
I had same problem doing my audi. turns out it was the polish and sealer I was using on the car. caused bad fish eyes :( nearly ended up in full respray.

pole drift
31-03-14, 23:46
How are you heating your shed??

LennyS13
01-04-14, 01:50
How are you heating your shed??


this man is onto something already. the likes of a space heater hen first started blows out unburned fuel and the particulets can land on the panel causing problems.

another one I know of is to watch for certain washing liquids as soon have additives to protect skin and stuff like that. I will try find the vid where I found this info :)

LennyS13
01-04-14, 01:53
first few seconds in this video

http://www.youtube.com/watch?v=zoM0bFFDAVg

GTSr32
29-09-14, 16:15
Just my 2 cents ! you dont have hair gel or after shave on while doing it? ( silly i know but iv seen it a few times)

paddyb01
29-09-14, 16:54
Just my 2 cents ! you dont have hair gel or after shave on while doing it? ( silly i know but iv seen it a few times)

Probably spunk it gets everywhere

Taz_20v
17-10-14, 07:11
Any Update on this?
I agree with the Barcode Statement said early it will stop all if not most reactions/problems could be the most silliest of things causing this reaction like particles in the air or the room your spraying etc
Hope you get this sorted

Zomby
28-11-14, 01:52
Just developed a few patches of these on my own car in lots of different spots. Noticed them during last wash, as they weren't there before. 2 years after it was resprayed as well. Any one know what might have caused this?

looks very like the image below except the paint is black/gunmetal.

http://www.chemtrend.com/sites/default/files/fish_eye_defect_in_composites.jpg

lady89
28-11-14, 09:21
maybe some chemical reaction? did you use anything new/unusual in terms of products etc?

johnmaloney88
29-11-14, 10:43
Just developed a few patches of these on my own car in lots of different spots. Noticed them during last wash, as they weren't there before. 2 years after it was resprayed as well. Any one know what might have caused this?

looks very like the image below except the paint is black/gunmetal.

http://www.chemtrend.com/sites/default/files/fish_eye_defect_in_composites.jpg

that looks like micro-blistering. it happens when there's trapped moisture in the undercoat like primer. when they painted it there must have been moisture in the air line or if they wet sanded the primer and didn't let it dry properly, primer is porous so soaks in water.

Zomby
30-11-14, 04:28
that looks like micro-blistering. it happens when there's trapped moisture in the undercoat like primer. when they painted it there must have been moisture in the air line or if they wet sanded the primer and didn't let it dry properly, primer is porous so soaks in water.

Thanks for the info! Is it normal for this to rear it's ugly head even 24 months after painting?

@Lady89: no haven't used any new chemicals, only ever washed with the same shampoo on all cars.

Anything that can be done for them short of a respray?.

Thanks

johnmaloney88
01-12-14, 17:16
Thanks for the info! Is it normal for this to rear it's ugly head even 24 months after painting?

@Lady89: no haven't used any new chemicals, only ever washed with the same shampoo on all cars.

Anything that can be done for them short of a respray?.

Thanks


happened to my carina before, was at least a year or two after it was painted. the weather was cold over the winter and my complete wing and bonnet bubbled up like hell. nothing apart from a respray will cure it.

ryan348
03-12-14, 10:04
think the problem your having man is the meterial your spraying on to as u said the skirts cam out fine it was just the overs wat id do sand it back down while wearing latex gloves there are oils and greases in your fingers then rub down with de greaser then prime it then wet sand the primer smooth then dry and rub down with de greaser and paint also wat type of paint you using like solvent bases water based 2pk??? and last thing dont spray unless the temp in the room is at least 10 degrees