G. Sweeney
03-12-13, 21:20
Putting this up to gauge interest.
Selling my Nissan Sil80 Drift Car.
If i don't get what i want for the car i will just break the bits i don't want.
This car is ready to just sit in and drive and is very competitive!!
Spec List:
Engine and Transmission:
Engine built and set up by Mike @ DeaneMSport, car has never missed a beat or caused a problem at a drift event.
2.1 Sr20 Engine running 360hp @ 1.1 bar boost
HKS GTSS Turbo, HKS Adjustable actuator, Japspeed manifold + Braided Turbo Lines
550cc Sard Injectors
50mm Alloy Rad
Front Mount Intercooler with all metal piping
Z32 Air Flow Meter
Power FC and Hand Commander
350z Gearbox with mount and balanced shaft
4:3 diff
Exedy Triple Plate Clutch
Fuel Pressure Regulator
Walbro Fuel Pump
Japspeed Oil Catch Tank
3’’ Exhaust (Straight all way back from manifold No Bends)
Interior:
IDC Spec Fully Welded Roll Cage
Tunnel done
X2 Sparco Bucket Seats
OMP Steering Wheel
Battery located in car in Stainless Battery Box
Hydraulic Handbrake with all braided lines
Button Start
Exterior:
Uras Rear Bumper
Uras Side Skirts
50mm Rear Quarters
30mm Front Wings
PS13 Vented Fibreglass Bonnet
Japspeed BGW
Have no front bumper but will include a Uras one if wanted
Tubbed at the front (have no issues with lock)
Tubed at the front and brackets for the headlights made up
Suspension/ Steering/ Brakes:
HSD MonoPro Coilover
Driftworks Traction Rods
Driftworks Tension Rods
Driftworks Toe Rods
Driftworks Camber Arms
Driftworks slotted subframe locking collars
Driftworks Off Rack Spacers
Driftworks Hubs
Tein Tie Rods and Ends
(All above suspension bought new last year)
S14 lengthened
5 Stud Hubs
Skyline Front Brakes
Skyline Rear Brakes
Skyline Discs
Wheels:
X2 Rota Torques 17 x 9’’
X4 Rota Torques 17 x 9.5’’
30mm Front Spacers
50mm Rear Spacers
The only bad it is i have no headlights for it and also the right rear quarter had a tip just needs a tidy up and the car is mint other than that!
I have spent over 20K on the car in the last 2 years.
So I'm looking for €8950ono for it complete.
To build a car to this spec would cost well over 20K.
Please only contact me id SERIOUSLY interested!
0876509384
http://i1221.photobucket.com/albums/dd471/garrysr20/904223_357219627732470_1809598484_o_zpse0d3f46a.jp g (http://s1221.photobucket.com/user/garrysr20/media/904223_357219627732470_1809598484_o_zpse0d3f46a.jp g.html)
http://i1221.photobucket.com/albums/dd471/garrysr20/428493_536098139762634_1918964965_n_zpseeaa0756.jp g (http://s1221.photobucket.com/user/garrysr20/media/428493_536098139762634_1918964965_n_zpseeaa0756.jp g.html)
http://i1221.photobucket.com/albums/dd471/garrysr20/856679_571884879503491_1192875441_o_zpsb55d31fa.jp g (http://s1221.photobucket.com/user/garrysr20/media/856679_571884879503491_1192875441_o_zpsb55d31fa.jp g.html)
http://i1221.photobucket.com/albums/dd471/garrysr20/428550_412822285492002_1893958450_n_zpsf4c83f7b.jp g (http://s1221.photobucket.com/user/garrysr20/media/428550_412822285492002_1893958450_n_zpsf4c83f7b.jp g.html)
Selling my Nissan Sil80 Drift Car.
If i don't get what i want for the car i will just break the bits i don't want.
This car is ready to just sit in and drive and is very competitive!!
Spec List:
Engine and Transmission:
Engine built and set up by Mike @ DeaneMSport, car has never missed a beat or caused a problem at a drift event.
2.1 Sr20 Engine running 360hp @ 1.1 bar boost
HKS GTSS Turbo, HKS Adjustable actuator, Japspeed manifold + Braided Turbo Lines
550cc Sard Injectors
50mm Alloy Rad
Front Mount Intercooler with all metal piping
Z32 Air Flow Meter
Power FC and Hand Commander
350z Gearbox with mount and balanced shaft
4:3 diff
Exedy Triple Plate Clutch
Fuel Pressure Regulator
Walbro Fuel Pump
Japspeed Oil Catch Tank
3’’ Exhaust (Straight all way back from manifold No Bends)
Interior:
IDC Spec Fully Welded Roll Cage
Tunnel done
X2 Sparco Bucket Seats
OMP Steering Wheel
Battery located in car in Stainless Battery Box
Hydraulic Handbrake with all braided lines
Button Start
Exterior:
Uras Rear Bumper
Uras Side Skirts
50mm Rear Quarters
30mm Front Wings
PS13 Vented Fibreglass Bonnet
Japspeed BGW
Have no front bumper but will include a Uras one if wanted
Tubbed at the front (have no issues with lock)
Tubed at the front and brackets for the headlights made up
Suspension/ Steering/ Brakes:
HSD MonoPro Coilover
Driftworks Traction Rods
Driftworks Tension Rods
Driftworks Toe Rods
Driftworks Camber Arms
Driftworks slotted subframe locking collars
Driftworks Off Rack Spacers
Driftworks Hubs
Tein Tie Rods and Ends
(All above suspension bought new last year)
S14 lengthened
5 Stud Hubs
Skyline Front Brakes
Skyline Rear Brakes
Skyline Discs
Wheels:
X2 Rota Torques 17 x 9’’
X4 Rota Torques 17 x 9.5’’
30mm Front Spacers
50mm Rear Spacers
The only bad it is i have no headlights for it and also the right rear quarter had a tip just needs a tidy up and the car is mint other than that!
I have spent over 20K on the car in the last 2 years.
So I'm looking for €8950ono for it complete.
To build a car to this spec would cost well over 20K.
Please only contact me id SERIOUSLY interested!
0876509384
http://i1221.photobucket.com/albums/dd471/garrysr20/904223_357219627732470_1809598484_o_zpse0d3f46a.jp g (http://s1221.photobucket.com/user/garrysr20/media/904223_357219627732470_1809598484_o_zpse0d3f46a.jp g.html)
http://i1221.photobucket.com/albums/dd471/garrysr20/428493_536098139762634_1918964965_n_zpseeaa0756.jp g (http://s1221.photobucket.com/user/garrysr20/media/428493_536098139762634_1918964965_n_zpseeaa0756.jp g.html)
http://i1221.photobucket.com/albums/dd471/garrysr20/856679_571884879503491_1192875441_o_zpsb55d31fa.jp g (http://s1221.photobucket.com/user/garrysr20/media/856679_571884879503491_1192875441_o_zpsb55d31fa.jp g.html)
http://i1221.photobucket.com/albums/dd471/garrysr20/428550_412822285492002_1893958450_n_zpsf4c83f7b.jp g (http://s1221.photobucket.com/user/garrysr20/media/428550_412822285492002_1893958450_n_zpsf4c83f7b.jp g.html)