View Full Version : Adam's k's ps13
OK . so where do i start . i was on the look for a ps13 for ages and ages, i viewed a few in Ireland but none were up to spec at all. all of them had very bad body corrosion / rust problems.
i was then contacted one night about a navy un registered ps13 that was in the country 2 days . i honestly thought it was a piss take so i rang the number.it was then i realized it was true and rising sun legends in cork (myles cooper) had one sitting in the docks in Dublin.. he sent me a few pics and the auction sheet and i just had to view it.
knowing the car was 100 % standard ment i could start with a blank canvas and make it mine with a rust free shell.
some of the pics i received of it
http://i733.photobucket.com/albums/ww333/burkey0013/photo_zpsca748d95.jpg (http://s733.photobucket.com/user/burkey0013/media/photo_zpsca748d95.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/1992Kps13frks_zps596cd46a.jpg (http://s733.photobucket.com/user/burkey0013/media/1992Kps13frks_zps596cd46a.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/photo_zps0e3eaada.jpg (http://s733.photobucket.com/user/burkey0013/media/photo_zps0e3eaada.jpg.html)
and so into ireland she came
in the docks and on the way home
http://i733.photobucket.com/albums/ww333/burkey0013/photo_zps629a3367.jpg (http://s733.photobucket.com/user/burkey0013/media/photo_zps629a3367.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/photo_zps009bda7b.jpg (http://s733.photobucket.com/user/burkey0013/media/photo_zps009bda7b.jpg.html)
the car needs some minor body work as there is faded lacquer and minor bits. i was happy with it.
went and bought a bride seat for it with a super low rail and a fmic kit.gave the bride a right good wash and she came up like new
http://i733.photobucket.com/albums/ww333/burkey0013/photo_zps4e1a3b02.jpg (http://s733.photobucket.com/user/burkey0013/media/photo_zps4e1a3b02.jpg.html)
painted the fmic black and tucked her it in behind the bumper
i bought a gtr style grille and got it fitted and painted .also have a set of red and clear lights in the post
http://i733.photobucket.com/albums/ww333/burkey0013/photo_zpse23dbab3.jpg (http://s733.photobucket.com/user/burkey0013/media/photo_zpse23dbab3.jpg.html)
so as a mechanic myself i said id bring it to work and give her a good going over the weekend. the car is mint underneath , and simply is.. i didnt wan the irish roads to take its toll and i wanted a full rust free protecion on the arches and rust prone strut towers on the front, gave it a good underseal
http://i733.photobucket.com/albums/ww333/burkey0013/photo_zps3e5c99b8.jpg (http://s733.photobucket.com/user/burkey0013/media/photo_zps3e5c99b8.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/photo_zps54f5e9a1.jpg (http://s733.photobucket.com/user/burkey0013/media/photo_zps54f5e9a1.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/photo_zps6df52ab9.jpg (http://s733.photobucket.com/user/burkey0013/media/photo_zps6df52ab9.jpg.html)
i was trying to decide what kit/ wheels etc to go with on the car so i decided im going with a 17inch rays te37 in bronze with low offset with all the original aero parts, so firstly i picked up this mint aero bumper from Japanese performance.
http://i733.photobucket.com/albums/ww333/burkey0013/photo_zps3bebdee9.png (http://s733.photobucket.com/user/burkey0013/media/photo_zps3bebdee9.png.html)
while i had it in work i removed aircon,carbon charcoal canister delete, bov removal. cleaned out air filter. lowered the tein coilovers, sprayed the gtr grille.just a few bits aswell and this is how she sits as of today..
http://i733.photobucket.com/albums/ww333/burkey0013/photo_zps11a74d89.jpg (http://s733.photobucket.com/user/burkey0013/media/photo_zps11a74d89.jpg.html)
i have big plans for this car. watch this space :grin:
Smokey Bear
08-10-13, 01:58
Fuckin cool! Can't wait to see what you do with it!
Nice! Underseal job looks tidy!
What underseal did you use? Great to see cars getting imported. Looking forward to how this turns out.
Best of luck with it. Looks mint be prepared to be broke ps13 life is expensive
Heres a pic of mine with the aero kit when I tried on one of the TE37'S
http://i178.photobucket.com/albums/w244/AE86JIMMY/2013-10-08094312_zps5f46d329.png (http://s178.photobucket.com/user/AE86JIMMY/media/2013-10-08094312_zps5f46d329.png.html)
thetangerine
08-10-13, 10:55
Very nice pal nd did it the right way by importing it. Keep her sideways pal
feckin nice! id love to really start with a blank canvas like that!
johnmaloney88
08-10-13, 15:32
lovely car, also u won't have eejits sayin oh i know a lad that used to own it and he dogged it everywhere and wrote it off, etc, etc.
lovely car, also u won't have eejits sayin oh i know a lad that used to own it and he dogged it everywhere and wrote it off, etc, etc.
Just cuz people aren't sayin it doesn't mean it didn't happen. Hopefully this one wasn't abused too much though.
thanks lads i have huge plans for it..
i know jimmy stands me over 7k already..
the te37's for sale?
i just used some tetra schutz undersealer. grand and handy and paint it on , just make sure everything is cleaned first .
You have a good little silvia, for the love of god dont put a kit on it :mad:
So much want!! Very nice car dude. Very hard to come a cross a good clean one these days. Best of luck with it.
the newest purchase
http://i733.photobucket.com/albums/ww333/burkey0013/photo_zpsb47786f5.jpg (http://s733.photobucket.com/user/burkey0013/media/photo_zpsb47786f5.jpg.html)
the newest purchase
http://i733.photobucket.com/albums/ww333/burkey0013/photo_zpsb47786f5.jpg (http://s733.photobucket.com/user/burkey0013/media/photo_zpsb47786f5.jpg.html)
what sizes?
They will look savage on the car...
new rear lights
http://i733.photobucket.com/albums/ww333/burkey0013/photo_zps43509d3c.jpg (http://s733.photobucket.com/user/burkey0013/media/photo_zps43509d3c.jpg.html)
this is gone be a showstopper of a yoke!
Lights are a mad difference,, Any pics of the wheels on the car!! Very nice car dude!!
ps13+te37s=horn
Haha thanks !
Wheels are not fitted as their still on route from Japan :) ..
Shotgun exhaust next and a garret 2871r
i really like where this is going.... cant wait to see the Te's on it
MartyMoore
19-10-13, 17:40
i really like where this is going.... cant wait to see the Te's on it
what this guy said
random shot of the rear , ive since sold the rear lip
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/photo_zps3ba73a59.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/photo_zps3ba73a59.jpg.html)
I had a blow in the exhaust manifold so I remove the turbo to see the gasket had 100% disappeared , im assuming the 4 corners broke off the gasket and it slid out
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/photo_zpsa0af4500.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/photo_zpsa0af4500.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/photo_zps5e50259d.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/photo_zps5e50259d.jpg.html)
I since then bought some new genuine Nissan gaskets and some braided turbo lines..
as nice as the projectors are I said feck off
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/photo_zps6711e2b9.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/photo_zps6711e2b9.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/photo_zps31dcb101.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/photo_zps31dcb101.jpg.html)
bought these puppys
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/photo_zpse13d421c.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/photo_zpse13d421c.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/photo_zps42e9349c.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/photo_zps42e9349c.jpg.html)
also got a 5 stud conversion off a r33 gts-t . got complete front , complete rear with backing plates. and I new I needed something got to do with the handbrake cables so I got all the cables even the handbrake lever ha..
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/photo_zpse6995d61.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/photo_zpse6995d61.jpg.html)
love this car !! cant wait to see the te37's on it
sound bill !
bought a t28 s15 turbo tonight aswell
nice car. you need Z32 hand break cables or 200sx s13 hand break cables.
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/photo_zps410cfea3.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/photo_zps410cfea3.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/photo_zpsefe4f623.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/photo_zpsefe4f623.jpg.html)
Bought a brand new gt2871r and a 3 inch decat
Looking for a hard pipe intake now .. if anyone has one floating around?..
stephen180
08-01-14, 00:27
smashing lookin car bud like the look of t without d kit
the decat . fine lump ha..
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/photo_zps81b0a483.jpg[/URL]
I also bought myself a z32 airflow meter
and a set of 740cc nismo injectors . once ahain sorted by Japanese performance
Jaysus Dave oHara must love seeing ur name come up on the phone ha. Coming together well now.are you going to drift it or just road use?
Haha yeah i say he does alright :P .. Well put it this way . It'll be on the road but plenty sideways ..
I'm in a spot of bother with my old s15 with caught messing so hopefully ill keep the licence .. Anyway here's tonight's eye candy
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/photo_zpsbaf2f86a.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/photo_zpsbaf2f86a.jpg.html)
The best update! Haha. I need some TE37's for my S14...
So ...
I am in love
..
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/photo_zps928b467c.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/photo_zps928b467c.jpg.html)
so new parts fitted..
s14 lcas
s14 thicker tie rods
s14 track rods
rack spacers
customised s14 hubs ;)
r33 gtst front brake set up
just a lil extra lock
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/photo_zpsf1b5413e.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/photo_zpsf1b5413e.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/photo_zpsc6decf71.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/photo_zpsc6decf71.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/photo_zpsc1e0b460.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/photo_zpsc1e0b460.jpg.html)
small pics of the car
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/photo_zps1e9a8855.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/photo_zps1e9a8855.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/photo_zpsc2bcb637.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/photo_zpsc2bcb637.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/photo_zpsdc87d355.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/photo_zpsdc87d355.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/photo_zpsdbde7f9d.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/photo_zpsdbde7f9d.jpg.html)
Waiting on lots of post from America so it'll be all put together with a bang this week ..
this is 100% going to be fucking amazing!
them wheels :shocked: beautiful nice work on this pal
Ha thanks lads .. Got new japo sticker for Window and new rays wheel stickers today in post ..
looks great man! youl need smaller tyres , what size are they? an the rear arches will need a nice roll !
They are 255 all round . Dropping back to 225 on front with stretch ..
Yeah it's going to jacki Fitz for respray in 3 weeks so he be pulling arches n also front wings ..
Can't wait to get it done ..
Got a buddyclub spec II catback for bit of power n noise . Polished done of it to see will it come up and it definitly will
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps15656804.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps15656804.jpg.html)
Here's how it stands at the moment .. It's goin on too long now .. Arches pulled front and rear .. Also I got a half cage too . That will be going white !!
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps5fe09d47.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps5fe09d47.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps4f91f9dc.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps4f91f9dc.jpg.html)
Tyres were 255 so dropped to 215 with bita strech
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zps9625dcbb.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zps9625dcbb.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zps248bf61d.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zps248bf61d.jpg.html)
Getting rid of the old tyres ha
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zps8cf96c9a.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zps8cf96c9a.jpg.html)
Got sard 850cc
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpseff4ac15.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpseff4ac15.jpg.html)
Got tein tension rods but need to get the rose joint spacers
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpsecb6a4f3.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpsecb6a4f3.jpg.html)
How it looked before heading to respray
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zps124c7c1d.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zps124c7c1d.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zps63e6a89e.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zps63e6a89e.jpg.html)
And now, I love my wings
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zps570f4379.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zps570f4379.jpg.html)
started a tomei fetish and started buying small parts
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zps26e0c2bb.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zps26e0c2bb.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpsd67a3839.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpsd67a3839.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zps3b8c1c55.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zps3b8c1c55.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zps05283482.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zps05283482.jpg.html)
got some nice door carrozzerias
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zps684c9ea6.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zps684c9ea6.jpg.html)
and boom it finally happened. respray done after 7 months in body shop..
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpsb14eacde.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpsb14eacde.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zps11496409.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zps11496409.jpg.html)
the front and rear arch pull
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpsc49e049a.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpsc49e049a.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zps49377aac.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zps49377aac.jpg.html)
obiously needs to be relowered
got a tomei type L fpr with all braided lines, a new z32 fuel filter. z32 afm and 256 in/ex pon cams. aslo got a 87mm tomei 1.2 mm steel headgasket and staying standard bore with a set of arp studs, bring the boost.. and some nice tomei assembly lube for them ha..
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zps0810967f.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zps0810967f.jpg.html)
How did I miss this thread car looks excellent man I tought ya had a white one bought when I was down picking up the dc5 coilovers,great work done to this look forward to seeing it in person at some shows next year :)
michealkirwan
04-11-14, 22:57
jacki is some sprayer, hes gifted! Lovely car lad, well wear.
Very nice car and your making some excellent choices when it comes to mods etc. Keep up the good work.
I went and looked at Spider-mans white one , was a great car just wasn't for me in the end .. So imported this .. .. Can't wait to get it finished .. Thanks
Jacki didn't spray it . I waited 3 months for him but was too busy so my local martin Dwyer done it and what a great job he done . Expensive but you pay for quality ..
Very nice car and your making some excellent choices when it comes to mods etc. Keep up the good work.
Thanks a million . I'm going to be basically using all the tomei engine parts .. And mapped up on nistune hopefully around Xmas ..
Just a few more little bits . Feeding the tomei addiction .. So that's mostly the fueling sorted now . Got a z32 fuel filter too . Just gota mock them up and order the correct amount of -6an fuel line to do them in braided hoses
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpsd67387c9.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpsd67387c9.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpsdd801d6c.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpsdd801d6c.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsdd265c7b.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsdd265c7b.jpg.html)
For those of ye who know tomei bits they don't make a gasket in 86mm bore
Also got a z32
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zps07ec025e.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zps07ec025e.jpg.html)
My tidy sr to denso jumpers thanks to Stevo
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps86acb4b1.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps86acb4b1.jpg.html)
serious car looking forward to seeing more updates
Yet again some more post ...
Got a nice polished tial sport external wastegaye . These are not cheap but quality is most important to me and my build ..
1 bar wastegate spring so that's the lowest it can be ran at .. I'll be running 1.3 bar high boost ..
Got some tomei rocker arm stoppers too
Also got a set of extra long inner tie rod boots for my extra lock off driftworks ..
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zps2fc62ac8.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zps2fc62ac8.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpsbd4dd04b.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpsbd4dd04b.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpsc61917e8.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpsc61917e8.jpg.html)
Small bit of shopping done with jdm distro ..
Got a 4.1 ratio cusco (model unknown) 2 way lsd ..
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps7e7d0445.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps7e7d0445.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsf014a7a7.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsf014a7a7.jpg.html)
And I got myself a nice used but like new twin plated os giken clutch kit , flywheel and release bearing .. It's still in japan but on it's way . Gotta love the rattle of a twin plate ..
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps2e664f9c.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps2e664f9c.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps46d32d36.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps46d32d36.jpg.html)
I'm nearly there . I need it mapped now but my preferred mapper is unreal hard to get on the phone ..
Today's arrival
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpsd4728489.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpsd4728489.jpg.html)
I can confirm to anyone looking for torques for the arp bolts
It's 90flbs in 3 equal stages ..
Can't wait to see these bits on in the flesh. You must take me for a spin ;)
Actually got home to find this was delivered today aswell ..
All I can say is WOW !!
The detail on this is crazy . The welding is porn !
The size of the thing no wonder they are ment to increase spool time and harder pull ..
This ladies and gentlemen is why tomei is the best car part manufacturer in the world ..
You pay for what you get !
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsd6bc5659.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsd6bc5659.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsd7b4b129.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsd7b4b129.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsd594087c.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsd594087c.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps0d46f9b7.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps0d46f9b7.jpg.html)
I have one of those on my ps13. Serious bit of kit
These shall do nicely ...
Tomei poncams . 256* 11.5 mm
I think that's the head finished up now ..
Gonna be busy for a weekend fitting all these bits ..
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps98eb34df.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps98eb34df.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps9826ccfa.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps9826ccfa.jpg.html)
Do you need any other mods to support the cam shafts?? Courius . Like rocker arm stoppers , and all the other bits for the head. I also have the turbo elbow. It's cool as fuck.
No Rico cams are drop in . No springs . No retainers . Cam gears are optional for precision tuning but I didn't bother
They are a great cam . Depending on boost pressures and turbo size you can free up about 20bhp with a tune ..
Yeah the turbo elbow is amazing haha .. You don't realise how big it is till it's in your hand ..
Rocker arm stoppers are a safety/reliability mid for the torture I'm going to give it
Was just courius to know, was on the tomei web page and thinking of just buying everything !!����
So bita Xmas work done
Ripped off the head on the ps13 and installed my arp studs
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps6aaf8912.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps6aaf8912.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps8c569152.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps8c569152.jpg.html)
Got the head skimmed by Martin treacys . Westward engineering . Wouldn't really trust much else
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsf7415a02.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsf7415a02.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps9b9d241f.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps9b9d241f.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps8e8dcd8f.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps8e8dcd8f.jpg.html)
Started fitting my tomei poncams and using my tomei assembly lube too
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps181cf7d1.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps181cf7d1.jpg.html)
Got it all timed up and fitted with the rocker arm stoppers
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps1b8ba241.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps1b8ba241.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsbf6a098e.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsbf6a098e.jpg.html)
Here's the start to the manifold . Waiting on nice burr bits for the Dremmel to arrive so I can go at it properly . That was the first dart with the plasma . Gonna remove the walls completly inside to make it single scroll
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps81a0d9e8.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps81a0d9e8.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsc1220b8c.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsc1220b8c.jpg.html)
Also got myself a non hicas rear subframe so I'm gonna get it powder coated and fit it with all kaber performance arms ..
Just a reflection photo . Still needs wet sand I think . But I'm picky
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsbd0ed0f1.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsbd0ed0f1.jpg.html)
When removing my turbo to do the head the manifold nuts were slightly loose . Now I remembering bulling them on , guess there lost their out of round lock but effect . So got all new ones with some gaskets and also got two oil filters . Genuine filters only will be fitted !
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps7b3d8d0e.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps7b3d8d0e.jpg.html)
Fitted the z32 fuel filter . Luckily enough . My old one was blocked solid .. Can't stress it enough lads change your filters . These cars are 23 years old . We'll mine is .. My fuel rank is slightly rusty . Might buy a new one as there 400 euro . Which isn't too bad considering I'll get another 20 years out if it ..
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps749e33e5.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps749e33e5.jpg.html)
Fitted solid steering bush
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps60714aaf.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps60714aaf.jpg.html)
How it sits now waiting for my inlet manifold and thermal gasket to arrive
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps21d47e01.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps21d47e01.jpg.html)
I'm sure I'll get there soon . Plan is finished for japfest 2015
I also stuck on tyres in work . Stretching is dangerous with hairspray and fire ha
9.5 j with 215
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps35795be6.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps35795be6.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps21ce3c52.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps21ce3c52.jpg.html)http://i733.photobucket.com/albums/ww333/burkey0013/image_zpscf895619.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpscf895619.jpg.html)
So today's delivery was a Freddy inlet (greddy copy) . A thermal intake manifold gasket and a 3 inch z32 filter adapter so I can pick my my own air filter without bolting it onto the mad ..
I knew the manifolds were shite quality but this one is terrible haha .. It's brutal , how they let them leave the factory like this is beyond me . But I knew this do I have dremmeled heads on the way aswell so I can fix it ..
Where can you go wrong for 90 euro delivered
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsd8bef4ed.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsd8bef4ed.jpg.html)
decobyrne106
09-01-15, 19:47
love this car!
Whats bad about the manifolds? The inside of them bad quality for flow etc? Just i'd like to know always wanted too :)
Thanks .. Which manifold do you mean ? Both intake and exhaust need work ..
If you say which one I'll tell you what's up with them ..
Picked up myself a little rare mines k and n filter . Just a nice jdm touch
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps09acf38d.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps09acf38d.jpg.html)
Picked this up today .. Just get the oil pressure.temp and water temp and controll unit now . It's the link series
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsca69559f.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsca69559f.jpg.html)
So mapping in 3 weeks time . Got to put it back together and get it running . I dropped the full tank to try sort the rust ..
Got my earls fuel lines fittings today ..
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpswlljxsij.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpswlljxsij.jpg.html)
I guess there's no going back now
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpslmgpohdx.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpslmgpohdx.jpg.html)
Excuse my ignorance . But why weldup the flap on the turbo?
External wastegate ��..
Controlling boost externally
Mods can lock this I'm not going to bother with it anymore
Mods can lock this I'm not going to bother with it anymore
why not? I like this thread :(
Ah it's just like me updating it . Putting up pics . Going into done detail of what's happening with it and everything .
And then there's never any reply etc . That's why it's ment to be a thread .. Not a story told by me yano .. I just think it's a waste if time by the time I have photobucket loading and everything else
Build threads are not really designed for the person who updates them to get a positive kick back . I thought they were for other people to read ,enjoy and give some inspiration. ? Maybe I'm wrong
Keep updating man, lads dont reply but do look at them. Also you cant go wrong with a detailed build thread if it ever came to selling!
johnmaloney88
21-02-15, 14:23
I'm not great at replying to threads but do love reading them. and i wouldn't feel bad about it, nobody ever replies to my threads haha, maybe they're just shit though.
We'll hopefully it never leaves my hands Stevo .. Ha ..
Yeah I guess your right jimmy . There's often a time I'd read through loads of big threads . Including your ps one . And I would enjoy it but I would always just leave a comment or something saying what's good and a change in a certain area or whatever as a suggestion . It's nice sometimes to hear a bit of feedback . That's all really
And I guess another thing is the site isn't as active as it was once .. Ah we'll
Fuel tank is wrapped up and heading for brownlow radiators in Armagh to get "re-nu'd" .. They split the ranks . Shot blast . Sealer . Weld the rank back together . 148 gbp sounds reasonable for the process and I've a rank not to worry about ..
Can't wait to get this thing mapped ..
That seems a waste of money? Lol last tank I cleaned out with some rust remover petrol an 804 gravel ,Power washed after and it was mint :cool:
Lol Your a rough man Jimmy
Lololololol , pissed in the tank then at the drift day for extra horse powerzzz. Anyway back to this build thread. Stop moaning get on with it lol
Ah keep updating it Adam! I love reading build threads of cool cars such as urs! I don't comment on them really as I don't want to come across as bein a fella who comments on every thread sayin "nice build" etc! Keep updating this! Car is a credit to ya!
I'm the same, always read the updates looking for tips/ideas but dont really comment. Anyways NICE BUILD, GREAT WORK, KEEP ME UPDATED etc...
I'm just commenting so I can get the 100 to sell shit :cool: In all things serious though it would be a shame to let the thread go with all the quality work and parts that have gone into the car
drift student
21-02-15, 20:40
Nice car lad :-P
Stick with it. There's comments are proof that people read the updates.
Got myself one of the coolest boost controllers on the market .
The new greddy profec ebc
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpspdsdytgo.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpspdsdytgo.jpg.html)
Thats really cool!! Were did you pick it up?
Much monies?
Glad to see you decided on keeping the build thread updated. Some money and top quality work going into it. Enjoying watching the progress!
Ye keep them comin man. And I've been eyeing up 1 of this controllers for weeks now ha
Andrew200sx
11-03-15, 12:26
ohhh i want that boost controler.....is it expensive??
I bought one of those recently! a brilliant piece of kit. can be mounted either way aswel. I got mine from RHD Japan lads
Yep that's it lads rhd japan are doing a great deal on them I got mine for 272 euro delivered .. Great value
Ah there won't be a end to this thread just a huge update in one months time .. Watch this space :)
I think it's a nicely designed boost controller, other than the mount... looks like a complete afterthought.
Such a nice boost controller. Did it take long for delivery?
So my fuel tank was a bit rusty . Just from sitting up with no fuel in it . Came in from japan like this ..
So I said right I need a tank but I didn't want to buy a used one . Nissan want 530 euro + vat for a new one and I wasn't planning on spending that kind of money
Found a crowd up north called brown low radiators that re-nu fuel tanks . Sent it away . 3 weeks later and 300 euro less in my pocket I get it back and delighted with it
Now to fill it with octane 😉 ..
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpswjjimmw3.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpswjjimmw3.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpsoraa1n10.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpsoraa1n10.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpsx81etgqw.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpsx81etgqw.jpg.html)
That's the job. I love detail like this.
So I fitted my new profec this was a pic before I fully wired it and the the defi ..
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsan3dfwee.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsan3dfwee.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpstr4s6zy2.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpstr4s6zy2.jpg.html)
So stuck on the carbon roof spoiler and wind deflectors back on and have it it's first wash ..
It's stick not sitting right and tyres are not same sizes
Getting there though
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpscudqgalt.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpscudqgalt.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsiazuwblp.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsiazuwblp.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpslaodxt8t.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpslaodxt8t.jpg.html)
looks brilliant. cant wait to see it sitting right
looks savage fair play ted
slithertooth
20-03-15, 15:24
That last picture- wowsa
Ah it's getting there alright . Mapping in 3 weeks time . 370ish bhp is what I want ,
The coilovers and adjustable arms .. Then vrt . Have the thing nearly two years and not vrt'd .. Gonna get rode
There is a daily penalty for non payment of vrt adam :eek:
Looks the job though
Yeah it's 0.01% so let's say if it's 790 euro . Daily penalty is 7.9cent a day .. So they told me ..
Hopefully not more ha ..
Thanks a lot . I'm not happy with it at all yet . I have a vision in my head and I'm not there yet ..
if you have pictures to show your car wasn't roadworthy....show pictures of the fuel tank out etc you shouldn't have to pay the penalty! I seen this online when I was vrting my own that had been off the road for 4 years!
The boost controller is a serious bit of kit. As i said before i have one and also have defi gauges and the boost controller reads the boost more accurately. After the turbo comes on boost it records the reading and displays it for a few seconds.
Yeah it's 0.01% so let's say if it's 790 euro . Daily penalty is 7.9cent a day .. So they told me ..
Hopefully not more ha ..
Thanks a lot . I'm not happy with it at all yet . I have a vision in my head and I'm not there yet ..
Penalty is 1% daily. I was getting caught with my R34 until I sold it to London. And ross on here with the r32 got caught too his was 3 days or something and they charged him 54e or something if I remember right.
Serious ps13 man. Wheels and kit are ace. That boost controller is the job. Want one myself for the supra
Thanks a lot .. I'm hoping to get it vrt'd in the next few weeks ..
So with the setup in going with I'm really trying to sneeze hp out of it ..
Measured up my mines ait filter and ordered up a velocity stack for it with a 3 inch adapter for the z32
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpsbiivi4tx.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpsbiivi4tx.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpseyokhfjc.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpseyokhfjc.jpg.html)
A quick snap today
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpsxy9rb5my.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpsxy9rb5my.jpg.html)
Just a comparison of 2 years and 20k
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpsn95cjpq3.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpsn95cjpq3.jpg.html)
Just a comparison of 2 years and 20k
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpsn95cjpq3.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpsn95cjpq3.jpg.html)
Yep i'd well believe it... You wouldn't be long dumping buckets of cash into them to get them the way you want them.
So with mapping next week I'm in a panic to get it going again .. I'm a mechanic by trade and I work a lot in the evenings for myself so it does be very hard to find the time to get near it ..
Fitted my extra lock drift work steering boots . Fit really we'll and not even under stretch and I have a good lock set up ..
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpstzd7l4xl.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpstzd7l4xl.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps8zkcp8md.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps8zkcp8md.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps8mzz0rst.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps8mzz0rst.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsys6hxv25.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsys6hxv25.jpg.html)
Since my car was hicas from factory I set upon removing all of it and while keeping the standard hicas power steering pump I disassembled it to remove the veins from the rear of the pump to stop it creating pressure . Gonna mig weld up the pipe fitting in work tomorrow
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpszfcbfcof.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpszfcbfcof.jpg.html)
After hours upon hours of work I'm finally finished my exhaust manifold . It's now single scroll too . One of my mates is going to get it tig welded up for me at his work so I'll have it back at the weekend
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsnxqgeldp.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsnxqgeldp.jpg.html)
Fitted my tomei fuel pressure regulator. My z32 Nissan fuel filter and made up a few braided line with all the earls an6 bits
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsxildzrf9.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsxildzrf9.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpssrh5t2ll.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpssrh5t2ll.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsiptarsdj.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsiptarsdj.jpg.html)
Also went braided from the fuel pump to the hardline and fitted the fully reconditioned tank I got done .. Bridges the fuel pump relay and set the static pressure on the regulator to 37psi . 36psi is the standard recommendation I think
http://i733.photobucket.com/albums/ww333/burkey0013/image_zps5sk0n7xw.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zps5sk0n7xw.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsinzwy4ux.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsinzwy4ux.jpg.html)
That's pretty much all for the moment . I'm waiting on post from frsport with a throttle body gasket and a idle air controll valve gasket . And a sr s14 throttle body pulley . All Genuine Nissan too . Them I can bolt on the inlet . It's only sitting there at the moment ..
The water lines to the iacv and the two water lines to the throttle body I've also made in braided line just waiting on some more an6 line finishers for them . Expensive but fuck it no price on reliability .. The hardship of a 23 year old water pipe leaking would Rot me ...
Trying to mock up the new intercooler pipe work . I really need to get new pipes made
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsj1pjucbt.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsj1pjucbt.jpg.html)
Also done some coil over adjustment
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsszhmoi6c.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsszhmoi6c.jpg.html)
Got my manifold back tig welded up so I can finally put it all back together now ..
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsj6wholnp.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsj6wholnp.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsakqos635.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsakqos635.jpg.html)
Also got a new iacv gasket , throttle body gasket , s14 throttle body pulley to work the Freddy manifold . Oh and a bit and washer for the rocker cover ha
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsj3exlkew.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsj3exlkew.jpg.html)
It's alive
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpscdld9hgu.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpscdld9hgu.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsdiowx8q3.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsdiowx8q3.jpg.html)
Yes Wednesday with stiv.... Gonna go for 1.4 bar and see how she holds up ..
Good work Adam. has Stiv a rolling road now?
Yep he does only has it a month or so.. Can't wait to get it done now .. 1 more day ha
D-turbo-lad
14-04-15, 16:47
did you ever get your vrt shit sorted out dude ??
Not yet vrt has to be done . Mapping tonight and vrt is next ..
So 1.3 bar
393hp
328flbs torque
I guess I'll take that and be very happy . This is the update ye have all been waiting for
Top class tuning by Stiv @mdtuning
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpswxeqgrco.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpswxeqgrco.jpg.html)
sweet, bet its lively to drive.
Seen it at stivs a few weeks back. The car is a credit to ya. Great figures too.
yomamagoes/sideways
09-05-15, 03:41
20k for new wheels :p Lol only messin man its what you cant see that makes the difference ;)
It's very fast . Lots of power . Fuck all lag . Great torque and normal drive ability ..
Thanks a lot . Good a few good comments from the guys at stivs, it looks kinda good in person just takes a bad photo ..
I bought it 100% standard . And I bought the most expensive parts that I need for best quality . Not one second hand parts really is in the car .. That's where the money adds up
yomamagoes/sideways
09-05-15, 12:45
It's very fast . Lots of power . Fuck all lag . Great torque and normal drive ability ..
Thanks a lot . Good a few good comments from the guys at stivs, it looks kinda good in person just takes a bad photo ..
I bought it 100% standard . And I bought the most expensive parts that I need for best quality . Not one second hand parts really is in the car .. That's where the money adds up
Thats it man genuine parts alone an you will see the dollars roll up in no time.
Savige car it will stand to ya in the long run
:)
So this week I got myself some solid rear subframe bushings
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zps97wadwec.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zps97wadwec.jpg.html)
I also got 4 litres of redline shock proof oil for the gearbox and LSD .
Seems to be very got stuff . I flows like a 75-90 gear oil buy has viscosity of a 75-140 oil but has a coefficient of friction similar to a 30w engine oil .. Best of everything ..
Looks exactly like poppa smurfs blood transfusion
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zps8pqtsvm2.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zps8pqtsvm2.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpsg6sjj9wm.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpsg6sjj9wm.jpg.html)
I also fitted my os giken twin plate spring clutch and flywheel . And I fitted my 2 way cusco LSD ..
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zps0l5yhwa7.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zps0l5yhwa7.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpsalir0jxs.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpsalir0jxs.jpg.html)
I had a r33 hub conversion and brakes done a long time now and I only got round to fitting the handbrake cable this week . Making a mounting plate for the cables as there different length and adjusted up my shoes properly . I'm no engineer but I'm proud of the way I done it ..
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpsdt9swsew.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpsdt9swsew.jpg.html)
So basically I know have a nice big clutch . LSD and a beast if a handbrake done this week . What else does a drift car want .. Haha
And how she sits waiting patiently for road..
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpsrh9ghpg6.jpg (http://s733.photobucket.com/user/burkey0013/media/image_zpsrh9ghpg6.jpg.html)
I just love this car so much. You just keep hittin them home runs with it, so many levels of perfect
Haha I don't think it's that perfect .. But i like to think I'm giving it nice parts and trying to set it up well ..
I just brought it for a quick spin up the road .. I can't definitely say with a skyline shoe inside disc rear brake setup . When correctly adjusted .. You will not need a hydro I love how it locks
Favourite ps13 in the country. Exactly how one should look
fair play credit where it's due
Really liking EVERYTHING about this!!!! credit to your work!
So I have a spare subframe I began working on . Fitting some solid bushings . After I had that done I started messing with colour .. I guess this could work ?
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zps56jkpk9z.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zps56jkpk9z.jpg.html)
So 6 months since the last update . A entertaining one ha
I paid 3,000 for stupid vrt and got it registered and in the road . Car was a dream on the road
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zps7mylczev.jpeg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zps7mylczev.jpeg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpsdedtg0bp.jpeg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpsdedtg0bp.jpeg.html)
So that went well . For 3 days and then bang
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpsyewwbpxx.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpsyewwbpxx.png.html)
So I decided I was going to go all out and build a sr22vet . Sourcing a ve head was proving to be difficult so in the end I bought a full vzr broke the car and got the head.
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpstrwrrie3.jpeg (http://s733.photobucket.com/user/burkey0013/media/image_zpstrwrrie3.jpeg.html)
I then changed my mind once more and I sold that head on and I finally went proper and got a new stove for my baby once and for all
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/image_zpsrjgqabuh.jpeg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/image_zpsrjgqabuh.jpeg.html)
A nice 1jz vvti .. My plans are to run 500 hp / 500flbs through it .
At the moment I'm thinking 6boost manifold
Precision 5858 ball bearing turbo
Downpipe and catback just custom
Sard 550cc
I still have to buy my transmission but I will be using a 350z z33 cd009 6speed box . Very closely ratio to the supra box
And I will be using a Collins adapter plate and clutch
Ecu wise I'm not sure yet prob haltech or something
At the moment I'm changing timing belt . Water pump . Can deals . Rocket gaskets and crank seals . I'm also toying with getting a 2jz oil pump . There just slightly bigger and flow a touch more ..
http://i733.photobucket.com/albums/ww333/burkey0013/image_zpslfxkjkwi.jpeg (http://s733.photobucket.com/user/burkey0013/media/image_zpslfxkjkwi.jpeg.html)
At the moment I won't be spending to much money on it as I've a little boy arriving due February but I do have a lot of money saved up to spend it on it but I'd say I won't concentrate on it till Jan 2017 . I'm sure I'll get it into the ps13 with the gearbox and have it running standard turbo but it won't see road till I've my own mods complete and I'm happy power etc ..
Serious amount of dedication going into this man. I abandoned my 2jz swap idea simply because of the money and time it needed compared to the end reward that i'd get out of it. I daily my cars and although i have access to my wife's car, I take the s-bodies 9 out of 10 times, rain, hail or snow. I had forgotten how much fun a simple sr20det with almost standard power was.
I'm gutted about what happened to your sr setup. All that blood and sweat only to get a few more tears :( This is shaping up to be one of the best PS13s i've ever seen though, so can't wait to see what happens next.
Fuck 3k for vrt! Your heart must be broke for it to have blown the engine then! Was that for all the late fines accrued? You might be able to appeal it showing pictures that you were restoring it and that it was unroadworthy. I don't know how true that was but I've heard of people doing it with success on backroads.ie forum. Might be worth looking into.
Best of luck with the 1jz build and congrats on the baby!
I have followed this thread all along and absolutely love everything about this car. I have a sil80 that i have built from the ground up also, but is no where near the standard of this. I have been bitten by the JZ bug as well and have recently bought a 1j from a friend and have been looking at gearbox ideas. I am going to sell my engine and box as its running perfect at the minute. I have not found a lot of information regarding the cd009 box in a s-body for things like the shifter location etc, any recommendations/findings? One last thing that i am curious about, why have you opted for the vvti over the non-vvti? some people maintain that they are very very difficult to get running in a s-body road car.
Are you going making your own mounts?
So I had a baby in January 2016 and I put this thing on hold for a while .. now that it's 2017 we're ready to go again
I sold the 1jz in favour for a sr20 set up to get it back running. I never bought the sr and went and got another 1jz vvti
I got a set of bc coilovers and dropped it a little and bought a a-5 dash and began to start getting it fitted
I also put a deposit on a cd009 350z box so I'll get that soon
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0148_zps5cyt1x6d.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0148_zps5cyt1x6d.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0147_zpswewxl6c8.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0147_zpswewxl6c8.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_9361_zpsohce8kky.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_9361_zpsohce8kky.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_9337_zpsn4uyofck.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_9337_zpsn4uyofck.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0158_zps8vovhfpf.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0158_zps8vovhfpf.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0157_zps8jvt9ztm.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0157_zps8jvt9ztm.jpg.html)
I also soureced a oem grille for it which I feels suits alot better and split the headlights and sprayed the fog buckets
Funnyonion
21-01-17, 21:59
Looks awesome man!!!
Took delivery of the box today .. few more trick parts in the post too
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0421_zpsegpwfpn2.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0421_zpsegpwfpn2.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0422_zpskm65c7gp.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0422_zpskm65c7gp.jpg.html)
How many engines have you bought for it??🙈 serious dedication sticking at it Adam. Gona be one the best when it's finished
it looks like loads but it was a sr16ve head and 2x 1jz vvti ha
ok so pulling the finger out of my hole the last few weeks
just a shot of the good stuff with a magnetic greddy sump lug
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0514_zpsgsam9yvi.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0514_zpsgsam9yvi.jpg.html)
chopped the traction control off the throttle body ive got a aluminium 90 degree bend in the post ill weld it on the tb instead, and decided to completely by pass coolant away from the throttle body .
as you can see I just made a an6 loop from the front water feed to the back
also got the rail an fittings
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0516_zpsmlayykbb.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0516_zpsmlayykbb.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0515_zpsupqfkwla.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0515_zpsupqfkwla.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0518_zpstvkbhwyk.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0518_zpstvkbhwyk.jpg.html)
just going to let it sit along here and as I am going to rework the standard loom , usually its a big piece of plastic here
im also deleting the iacv so I have a nice billet block off plate coming for that too
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0520_zpsyimbmk4x.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0520_zpsyimbmk4x.jpg.html)
just trying to mock up the fuel pipes and see what I can use from the sr20 setup I had, ill most likely buy all new an6 hose and do the whole lot fresh
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0522_zpsedxcv89f.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0522_zpsedxcv89f.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0519_zpsyjpp9bbl.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0519_zpsyjpp9bbl.jpg.html)
pulled it out of the shed and gave the bay a power wash , was destroyed from a hicas leak I had when I bought it
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0753_zpsle6xncsc.png (http://s733.photobucket.com/user/burkey0013/media/IMG_0753_zpsle6xncsc.png.html)
started removing the master cylinders and all the in bay steel brake pipes as ill be changing to an3 Teflon chase bays stuff, also took off the power steering hard lines there also going to be custom braided, im in two minds to get the bay sprayed while its stripped. also removed all the loom so im now going to start into splicing and making my own loom for starter solenoid etc for the jz
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0735_zpszyxysukb.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0735_zpszyxysukb.jpg.html)
my Collins adapter kit arrived after, savage machining on it , just went to local place and got some Allen bolts, ordered the line up dowels for the box off Nissan as it doesn't have any and I don't want all the stress on the box and I want it 100% centred
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0661_zpsarjybvnz.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0661_zpsarjybvnz.jpg.html)
got my chase bays s13 1jz to cd009 braided clutch line
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0674_zpsquwlnwfy.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0674_zpsquwlnwfy.jpg.html)
just waiting patiently now
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0737_zpsfhziy1df.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0737_zpsfhziy1df.jpg.html)
took into the loom
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0770_zps0djyql5f.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0770_zps0djyql5f.jpg.html)
so far ive deleted the traction control, fuel evap solenoid, boost solenoid few more I cant think of but basically reducing the loom drastically
all the interior powers from the fuse box etc. im only halfway there with it
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0783_zpssxkgpz1m.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0783_zpssxkgpz1m.jpg.html)
so far
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0782_zpszkspdd6h.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0782_zpszkspdd6h.jpg.html)
its crying to be fixed, its has 215/50 rear tyres and 215/40 front im going to buy 4x 215/45 westlakes hopefully rises the front bumper but fills arch gap a little
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0736_zps1h87psv8.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0736_zps1h87psv8.jpg.html)
at the minute im just waiting on my xcessive engine mount brackets, solid rubber mounts, and other little bits like rays wheel nuts.
im guessing maybe 10-12 weeks should have it done.
I have the front pulled off it now waiting to fit the engine and I can mock up intercooler pipes etc
The bay already looks great! did you have much hassle getting the engine out without taking off the whole front?
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1071_zpsufjcibb0.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1071_zpsufjcibb0.jpg.html)
Got my mounts today . Really high quality and good thick steel . Huge adjustment in them so looking forward to fitting them . Xcessive manufacturing s13 kit
Just got a iacv block of plate to it's just a billet plate with a o ring .
A 3 inch 90 degree bend that I will weld into the throttle body , as they end up very close to the radiator and it's best to have a solid peice rather than a silicone joiner .
And then just a oem Toyota oil filter but it's the larger type as there is too .
Looking forward to fitting it now I've ordered all of my relays and fuse blocks etc to make up my powers to the Ecu and fuel pump etc ..
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1075_zpsyz5zjcqo.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1075_zpsyz5zjcqo.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1074_zpsk99j3iei.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1074_zpsk99j3iei.jpg.html)
Got the engine fitted last night was a tight squeeze
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1109_zpsipajge7u.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1109_zpsipajge7u.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1110_zpsllxyngvt.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1110_zpsllxyngvt.jpg.html)
Also got a compression test done 170psi across all 6
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1101_zpsf56dan6b.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1101_zpsf56dan6b.jpg.html)
Also the billet block off plate for the iacv
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1097_zps6e9aesea.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1097_zps6e9aesea.jpg.html)
Trc deleted from the throttle body and 3 inch 90 welded on for space near the radiator . And 90 degree silicone joiners can weaken and fatigue ..
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1136_zpswts5rnp0.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1136_zpswts5rnp0.jpg.html)
The intercooler pipe off the turbo I cut and shortened it to remove the fitting for the standard bov. Just makes life easier than capping off pipes
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1135_zps0wyvahuk.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1135_zps0wyvahuk.jpg.html)
That's the throttle body sorted
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1137_zpstskqxo6c.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1137_zpstskqxo6c.jpg.html)
I got a japspeed universal 100mm rad too . I find that if I fla little extra with the cooling on this Silvia as regards water and oil I will have no real problems and it will be reliable . I just have the get the rad pipe parts moved to where I want the . If this won't help cool it I dunno what will
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1227_zpsjx2gg53l.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1227_zpsjx2gg53l.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1220_zpspkn4nwrd.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1220_zpspkn4nwrd.jpg.html)
Mounted up my fpr on the opposite side
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1139_zpshhpuklut.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1139_zpshhpuklut.jpg.html)
Engine mounts arrived
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1160_zpsjhzp8ics.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1160_zpsjhzp8ics.jpg.html)
Decided to buy some stainless and try to begin making up the exhaust . I bought 4metres and 4 90s
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1191_zps7d4lsr74.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1191_zps7d4lsr74.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1192_zpsyq9y7pbw.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1192_zpsyq9y7pbw.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1194_zpskobduttg.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1194_zpskobduttg.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1215_zpsptckkuvi.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1215_zpsptckkuvi.jpg.html)
The welds are shit but the important part is I made it myself and it will be strong
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1217_zps5g019ush.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1217_zps5g019ush.jpg.html)
I did a bit of heat anodising for the tips just to trick it up a bit and not let it just be another shotgun
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1229_zpsxvglmgk8.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1229_zpsxvglmgk8.jpg.html)
And just squashing the pipe in the vice to make a oval centre section for clearance . I need to buy 2 3inch v bands now to finish it , I also got a high quality flexi for the down pipe
The http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1218_zps5rztae2x.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1218_zps5rztae2x.jpg.html)
Aslong as the exhaust has no blows , clears the ground . And tips look good I'm happy . Not looking to win any welding competitions ha
I have also ordered a lot of parts to finish the car watch this space
OK so a update due.
will be a bit unorganized but anyway
i went about using a oem loom with everything deleted i didnt need, was turning out pretty well
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0782_zpszkspdd6h.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0782_zpszkspdd6h.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_0770_zps0djyql5f.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_0770_zps0djyql5f.jpg.html)
then i decided to scrap it and go standalone ecu
act extreme duty 6 puck
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1416_zpsk11cfxj4.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1416_zpsk11cfxj4.jpg.html)
The engine control unit of my choice was a ecu masters black . with 7ft harness which i had planned Paul twomey to build. mac boost solenoid. bosch lus 4.9 wideband . bosch iat and use the in built map to delete the oem air flow meter
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1326_zpsmncbqata.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1326_zpsmncbqata.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1328_zpsny6h2fhi.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1328_zpsny6h2fhi.jpg.html)
also using honda integra dc5 k20 type r coil on plug set up
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1366_zpsiqyic3tn.png (http://s733.photobucket.com/user/burkey0013/media/IMG_1366_zpsiqyic3tn.png.html)
fiveomotorsport custom bosch ev14 550cc injectors
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1355_zpsc5ntjent.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1355_zpsc5ntjent.jpg.html)
collins adapters cd009 gearbox mount
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1262_zpsqmyzsq0c.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1262_zpsqmyzsq0c.jpg.html)
the tunnel massaging haha
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1373_zpshjgdtkcx.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1373_zpshjgdtkcx.jpg.html)
picked up a set of rays nuts to go with the wheels
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1445_zps6vsbbwsw.jpg (http://s733.photobucket.com/user/burkey0013/media/IMG_1445_zps6vsbbwsw.jpg.html)
from there i decided to try add power on the turbo side.
i wanted to finish the car soon and not put much money into it as it killed me having it off the road. so i picked up a gtx3071r compressor wheel and steel 55/58mm steel turbine wheel and shaft . got them machined and fitted to the oem turbo looked good actually
compared to oem
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1520_zpshsl9e7sx.png (http://s733.photobucket.com/user/burkey0013/media/IMG_1520_zpshsl9e7sx.png.html)
http://i733.photobucket.com/albums/ww333/burkey0013/IMG_1519_zpspqo9hcmg.png (http://s733.photobucket.com/user/burkey0013/media/IMG_1519_zpspqo9hcmg.png.html)
So so so happy to see this build coming back to life. Such a great car and a great build thread for anyone who's looking for a comprehensive history of a great irish car.
comp housing bored and uprated journal bearing and thrust pad fitted
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/IMG_20170808_005601_906_zpsnmn3cbaa.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/IMG_20170808_005601_906_zpsnmn3cbaa.jpg.html)
got some samco bits then to make the heater matrix fully functioning as its important on a road car
also made up some hard rads pipes
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20170630-144019_zpsnfsqlbly.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20170630-144019_zpsnfsqlbly.png.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/IMG_20170701_003348_494_zpsqf8rczkg.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/IMG_20170701_003348_494_zpsqf8rczkg.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20170630_174953_zpszv2rbcfi.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20170630_174953_zpszv2rbcfi.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/IMG_20170625_001130_686_zpsdqqwqlwb.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/IMG_20170625_001130_686_zpsdqqwqlwb.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/IMG_20170625_000607_145_zpskctq5mqk.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/IMG_20170625_000607_145_zpskctq5mqk.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20170621_175912_zpscaewms8i.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20170621_175912_zpscaewms8i.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20170626_172313_zps6ad1oq5e.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20170626_172313_zps6ad1oq5e.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20170611_212811_zps7oalvhnc.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20170611_212811_zps7oalvhnc.jpg.html)
got the intercooler pipes and intake fabbed up i used v bands also to complete the exhaust and the lsu and iat sesnor fitted
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20170711_185031_zpsrcv29oah.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20170711_185031_zpsrcv29oah.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20170711_185038_zpsrpmdemm3.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20170711_185038_zpsrpmdemm3.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20170706_212127_zpsbvujfyeq.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20170706_212127_zpsbvujfyeq.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20170708_173925_001_zpslsaeyete.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20170708_173925_001_zpslsaeyete.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20170813_204054_zpsm8qg2on4.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20170813_204054_zpsm8qg2on4.jpg.html)
at this stage i was beginning to get happy with the car and i could see where things were going
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/IMG_20170630_005123_413_zpsnezvx4r4.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/IMG_20170630_005123_413_zpsnezvx4r4.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20170813_221329_zps6p5mhgwm.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20170813_221329_zps6p5mhgwm.jpg.html)
loaded it up and sent it off to cork to be wired by paul twomey
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20170828_172341_zps0sv4gfgt.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20170828_172341_zps0sv4gfgt.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20171025_202942_zps5vf70mqt.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20171025_202942_zps5vf70mqt.png.html)
when it was gone shit hit the fan changed my mind again about the turbo and i decided to do it right. sold the hybrid gtx3071r and bought this set up
pte jornal bearing 5858
sinco manifold
tial 44mm
all vband no gaskets
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/IMG_20170924_000935_734_zpsckcrednf.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/IMG_20170924_000935_734_zpsckcrednf.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/IMG_20170924_000935_730_zpsbtalo3xh.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/IMG_20170924_000935_730_zpsbtalo3xh.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20171127_194720_zpsxumixqmn.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20171127_194720_zpsxumixqmn.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20171127_194729_zps5gofxxrx.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20171127_194729_zps5gofxxrx.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20171127_195643_zps9nsgsjwr.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20171127_195643_zps9nsgsjwr.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20171127_195942_zpshljzfj5t.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20171127_195942_zpshljzfj5t.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20171118_185555_zpsay6sunkb.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20171118_185555_zpsay6sunkb.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20171128_125456_zpsomj0fpnq.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20171128_125456_zpsomj0fpnq.jpg.html)
got some 60mm advance guages for the s15 dash and a new nardi deep corn
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Snapchat-777701874_zpsxbhshqsb.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Snapchat-777701874_zpsxbhshqsb.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Snapchat-769774_zpsg4wmdezu.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Snapchat-769774_zpsg4wmdezu.jpg.html)
I cant see any pictures, is it just me or does photobucket look like they dont let you see photos anymore?
how she sat for a bit
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180109_143554_zpse5dsdyoc.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180109_143554_zpse5dsdyoc.png.html)
from here paul just made this into a real car . hes a sound lad, real easy to deal with no bullshit and straight . good quality work and you pay for what you get
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20180118-195204_zpssutmm9ts.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20180118-195204_zpssutmm9ts.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/20180305_121124_zpsaqpe5owg.png (http://s733.photobucket.com/user/burkey0013/media/20180305_121124_zpsaqpe5owg.png.html)
http://i733.photobucket.com/albums/ww333/burkey0013/20180305_121140_zpss5lvytkq.png (http://s733.photobucket.com/user/burkey0013/media/20180305_121140_zpss5lvytkq.png.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20180118-190754_zpstajscgjh.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20180118-190754_zpstajscgjh.png.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20180118-195121_zpsephdhoyg.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20180118-195121_zpsephdhoyg.png.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20180119-201121_zpsdnqulo4p.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20180119-201121_zpsdnqulo4p.png.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20180119-154340_zpse2hr5etd.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20180119-154340_zpse2hr5etd.png.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20180201-192901_zpsdp60tlmo.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20180201-192901_zpsdp60tlmo.png.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20180201-192910_zpssym4lpqh.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20180201-192910_zpssym4lpqh.png.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20180201-192908_zpsmkbjgrxl.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20180201-192908_zpsmkbjgrxl.png.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20180201-192905_zpssjkpvqqm.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20180201-192905_zpssjkpvqqm.png.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20180202-112444_zpsbp0rttby.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20180202-112444_zpsbp0rttby.png.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20180201-223919_zpsyv4a80pw.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20180201-223919_zpsyv4a80pw.png.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20180119-203908_zpswlkpos9t.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20180119-203908_zpswlkpos9t.png.html)
and i think my favorite photo of the car through the build
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180120_125141_zpspwomfqpv.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180120_125141_zpspwomfqpv.png.html)
from here i just couldnt wait for the car to come home i just drove to cork to fit up the sinco and 5858 for the photos haha
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180203_104709_zps3az0cdkf.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180203_104709_zps3az0cdkf.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180203_104726_zps2qcnni4n.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180203_104726_zps2qcnni4n.jpg.html)
also fitted up some r34 gtr brembos
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20171115_164449_zps97mvc7sm.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20171115_164449_zps97mvc7sm.jpg.html)
picked up a fiveomotorsport 340lph avenger pump and a oem oil cooler delete block
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20171204_171338_zpsbdqkxwru.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20171204_171338_zpsbdqkxwru.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20171213_165604_zpsrucumznj.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20171213_165604_zpsrucumznj.jpg.html)
picked up some oem spats
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20171028-195147_zpsktebmn76.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20171028-195147_zpsktebmn76.png.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20171028-195143_zpsuirybiw3.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20171028-195143_zpsuirybiw3.png.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20171028-195136_zpso5lznimi.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20171028-195136_zpso5lznimi.png.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20171028-195133_zpsnc0ohhxw.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20171028-195133_zpsnc0ohhxw.png.html)
had some crazy hardship with buying a lip and not been posted so i ended up buying two of these rocking horse shit rare bomex lips, so this one is still in transit . hopefully it comes
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20171023-234702_zpsdepps14c.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20171023-234702_zpsdepps14c.png.html)
s15 dash conversion nearly buttoned up all cluster working
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20180205-180713_zpsp9decx4v.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20180205-180713_zpsp9decx4v.png.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20180205-180708_zpslckdo2hu.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20180205-180708_zpslckdo2hu.png.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20180205-170711_zpsco1rxlgq.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20180205-170711_zpsco1rxlgq.png.html)
odysey pc680 battery relocated to under the pass seat
collected the car from cork got it home and straight into the downpipe, screamer pipe and also intercooler pipes fabbed up to suit the new turbo set up
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Snapchat-1325460043_zpsn9w3jkwe.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Snapchat-1325460043_zpsn9w3jkwe.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180207_164714_zpsmb57fiy7.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180207_164714_zpsmb57fiy7.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180204_163204_zps3zi816p5.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180204_163204_zps3zi816p5.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Snapchat-1472214042_zps0tga2l3a.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Snapchat-1472214042_zps0tga2l3a.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180211_155418_zpsgjvlhtzn.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180211_155418_zpsgjvlhtzn.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180211_155422_zpslsmjai9v.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180211_155422_zpslsmjai9v.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180211_1554250_zps0vqezr6r.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180211_1554250_zps0vqezr6r.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180211_155435_zpswzelmc4c.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180211_155435_zpswzelmc4c.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180211_155501_zps3otsgie2.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180211_155501_zps3otsgie2.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Snapchat-66895505_zpsiwiy1vax.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Snapchat-66895505_zpsiwiy1vax.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180212_154903_zpsqtxinm3r.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180212_154903_zpsqtxinm3r.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180214_122354_zpsaypeeh3c.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180214_122354_zpsaypeeh3c.jpg.html)
heatwrapped down pipe and screamer pipe, also fitted a ti turbo jacket
to be honest i dont have all the photos off all the stuff but i have some time and money invested into the things you do and dont see like all the fuel lines with the bosch motorsport fuel filter, all the torques an lines and fitting. billet servo assist check valve . turbo feed and return lines. etc. i didnt cut any corners at all
the car is wired for its standalone fuel pressure sesnor as seen in the fuel reg on bulkhead. wired for its standlone oil pressure sensor for the ecu and these can be set up in the ecu for engine protection so anything decides to try creep up as a problem the car will shut off before i even notice it. maybe it overkill but it is pretty much a all out drift car on the road.
also picked up a bride zeta 2 and i bought a brand new bride rail
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180210_215518_zpsadnflapn.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180210_215518_zpsadnflapn.jpg.html)
the serial999 shifter is a work of art can be seen in the photos above for the s15 dash photos
just mounting up the mac boost solenoid and running vacuums. ive fitted heatsleeving to all vacuum pipes, turbo oil feed and return.
im terrified of a fire with it
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180223_002103_zps23h28zzw.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180223_002103_zps23h28zzw.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180221_182717_zps42hryaiq.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180221_182717_zps42hryaiq.jpg.html)
got a mate to weld on 2x -an10 fittings for the rocker breather for pcv. deleted oem pcv. anlso deleted the little bridge that goes between cam covers, was annoying me as it was foiling one of the coils
also i fitted the fuel lines up tidier mounted alot of stuff properly
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180304_181733_zpsutikjhya.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180304_181733_zpsutikjhya.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180223_002109_zpsoxuobply.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180223_002109_zpsoxuobply.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180223_002055_zpsmc7hip00.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180223_002055_zpsmc7hip00.jpg.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180304_185317_zpskov4mgxs.jpg (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180304_185317_zpskov4mgxs.jpg.html)
very fast made up a throttle cable bracket just to see i will make a heavy duty tidy one from stainless now i have measurements good
oh yeah the cool switches too ha
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20180207-202938_zpsrbmtdrzp.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20180207-202938_zpsrbmtdrzp.png.html)
i have to mount my 2x spal rad fans next and im doing something very fancy as regards the pcv breather system so watch this space.
hopefully this little thing holds up
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/Screenshot_20180305-124209_zpstqjzuyq8.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/Screenshot_20180305-124209_zpstqjzuyq8.png.html)
also an brake lines from chase bays . chase bays braided power steering lines and reservoir and coolant overflow bottle
pretty much brings it all to date so heres how my baby sits waiting for mapping april 2nd
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180221_102251_zpsejgo1axa.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180221_102251_zpsejgo1axa.png.html)
http://i733.photobucket.com/albums/ww333/burkey0013/Mobile%20Uploads/20180221_102306_zpsy7wgcgas.png (http://s733.photobucket.com/user/burkey0013/media/Mobile%20Uploads/20180221_102306_zpsy7wgcgas.png.html)
ill keep this updated as we go ;)
so what you got to do is update chrome add on to see them . laurence has a thread on the link to do it
Brand new bride rail . Not something you see everyday
I also fitted oil temp sensor into the sump .
Water temp sensor in top rad pipe
Fitted my bride zeta 2 and picked up a r32 gtr passenger seat
I also sprayed the cam covers midnight blue and fitted 2x an10 fittings
Fitted some driftworks rear camber arms and zero'd out the rear camber arms .
Also had to raise the car up a bit to get it in and out of the shed.
Its not at a show car height but it is a drift car so i dont mindhttps://uploads.tapatalk-cdn.com/20180319/702a542e6ae1ad0415e717d260db9525.jpghttps://uploads.tapatalk-cdn.com/20180319/d65030826b1cf0f3a9c05c0e25900910.jpghttps://uploads.tapatalk-cdn.com/20180319/5b339c52a26a4f45ef578d74d5b9ab14.jpghttps://uploads.tapatalk-cdn.com/20180319/e4733bfac788a018a8f0478c70dfd4fa.jpghttps://uploads.tapatalk-cdn.com/20180319/65de3121a9e45d52e0efd9d2bd6872b3.jpghttps://uploads.tapatalk-cdn.com/20180319/02d736f6691082b35d78ea66656cbecd.jpghttps://uploads.tapatalk-cdn.com/20180319/1cd233128b352f28b97d005fb1b23f54.jpghttps://uploads.tapatalk-cdn.com/20180319/790bc43d28831c1180b71ae0c4d7ce3e.jpghttps://uploads.tapatalk-cdn.com/20180319/795b0e5acfa35e4b3580c9054829205c.jpghttps://uploads.tapatalk-cdn.com/20180319/fe8ea361a6850d5e3925c0646a02c500.jpghttps://uploads.tapatalk-cdn.com/20180319/d8ae786fe5f4bc0aa7e11ef80991ff40.jpg
Sent from my SM-G930F using Tapatalk
I love this car as if it were my own :) And i've never even seen it in the flesh. The level of detail and effort and the expense you've gone to is unreal. If i had to find fault though, I'd bin that red seat, as cool as it is, it doesn't look right to me. Everything else on the car looks like it's meant to be :) Even a black zeta would just look a little more subtle.
ronan_nash
21-03-18, 18:03
Ignore Laurence and keep the red seat [emoji108][emoji23] lovely pop of colour that they need inside [emoji108]
Sent from my HTC 10 using Tapatalk
Ignore Laurence
Generally sound advice to be fair...
ronan_nash
23-03-18, 08:38
Generally sound advice to be fair...[emoji23][emoji23]
Sent from my HTC 10 using Tapatalk
I personally love the red bride . If it fitted a black zeta it would look bad against the navy gtr seat
Be like wearing black trousers and a navy t shirt and socks [emoji28]
Sent from my SM-G930F using Tapatalk
So not much has gone on lately.
I made a plate to house the k20 coil packs
Remote mounted the defi oil pressure sensor and the oem dash oil light
Car went for tuning and thermostat stuck closed so bought a 68c mishimoto one
Stuck on my 2x spal rad fans .
One is a pusher and one is a puller each side of the rad
Picked up 2 rpf1 skids wheels and the regamasters are just a new thing
Also fitted some heat sleeving to the matrix coolant hoses beside the downpipe.
Fitted a mechanical fuel pressure guage back on.
https://uploads.tapatalk-cdn.com/20180508/fd49ff1765d53cc4f7d6cac785cdb4b0.jpghttps://uploads.tapatalk-cdn.com/20180508/2404f334cd64f8c67a03021092f566e1.jpghttps://uploads.tapatalk-cdn.com/20180508/ee56df97c443bba3871931668129e563.jpghttps://uploads.tapatalk-cdn.com/20180508/4c2655997858a3a95c0a46d35f2f9508.jpghttps://uploads.tapatalk-cdn.com/20180508/a6dba91233dca276afb770ab25d7b4c2.jpghttps://uploads.tapatalk-cdn.com/20180508/6af188082ce7615737555b22e8540fdd.jpghttps://uploads.tapatalk-cdn.com/20180508/fe032cc382d8327b1ccacb3358a6d97e.jpghttps://uploads.tapatalk-cdn.com/20180508/5d265d5785a78c9ba5b249c79cb181e3.jpg
Sent from my SM-G930F using Tapatalk
Also fitting arrived for my crankcase breathers https://uploads.tapatalk-cdn.com/20180508/39b91c566e1a3f8fd7db41eb1d31d6b1.jpghttps://uploads.tapatalk-cdn.com/20180508/86313a2756f6f148bbe233e5392536a5.jpghttps://uploads.tapatalk-cdn.com/20180508/6abc2416fdbabae69d09831baa02cb0b.jpg
Sent from my SM-G930F using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.