alan opel
01-07-13, 22:43
well lads ! said id throw up a project thread for this !! bought it off dave on here after selling my r33! car has decent spec but the engine was down compression on one cylinder! sorry about pic quality my digital camera pooped itself!
got her home anyway
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn2/6182_10200835420620940_553721960_n.jpg
after a comp test showed 9.5 bar in 1,2,4 and 6 in cyl 3 so threw a little bit of oil down cyl 3 , comp tested it again an had 9 bar, so i sed ill pull it apart before buying another sr20! an hour or two later!
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/994141_10200836301202954_911118743_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/998194_10200900516728302_1396977273_n.jpg
so pulled it apart, usual crakced ring land in cyl 3, bore is perfect so gona rebuild this engine ! all stripped now waiting on parts
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn1/996804_10200900513928232_948191195_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash4/10186_10200900514368243_1682672458_n.jpg
ordered head set head gasket and new big ends, the ones that came out were ok but had a bit of wear on them, so might aswell do them while i have it split!!
the next dilema was the wheeels, the ones on it are 5zigen 17x10 et22, but one of them has an offset of near 40 and looks totaly different :( which is really bugging me :( so i bought these today !!! :)
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/1044188_10200899569384619_154997585_n.jpg
all 17x10 et 28 i think !
so until the rebuild parts come through she is sitting sory for her self like this !
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/1002248_10200881007120574_1098124797_n.jpg
thats it for now :)
got her home anyway
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn2/6182_10200835420620940_553721960_n.jpg
after a comp test showed 9.5 bar in 1,2,4 and 6 in cyl 3 so threw a little bit of oil down cyl 3 , comp tested it again an had 9 bar, so i sed ill pull it apart before buying another sr20! an hour or two later!
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/994141_10200836301202954_911118743_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/998194_10200900516728302_1396977273_n.jpg
so pulled it apart, usual crakced ring land in cyl 3, bore is perfect so gona rebuild this engine ! all stripped now waiting on parts
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn1/996804_10200900513928232_948191195_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash4/10186_10200900514368243_1682672458_n.jpg
ordered head set head gasket and new big ends, the ones that came out were ok but had a bit of wear on them, so might aswell do them while i have it split!!
the next dilema was the wheeels, the ones on it are 5zigen 17x10 et22, but one of them has an offset of near 40 and looks totaly different :( which is really bugging me :( so i bought these today !!! :)
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/1044188_10200899569384619_154997585_n.jpg
all 17x10 et 28 i think !
so until the rebuild parts come through she is sitting sory for her self like this !
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/1002248_10200881007120574_1098124797_n.jpg
thats it for now :)