View Full Version : rb25det ecu pinout
well lads just looking for a little info here need to kno which pin is 12v live to power the ecu and any info that any1 wants to give me..
iv googled a little on it but iv found so many sites and this one says this and another says somthing different so hopefully help will be found here :):)
cheers
Sir Diffsalot
01-05-13, 22:05
Ya should find the info ya need on this link
http://www.apexi-usa.com/manuals/electronics/neo_diagram.pdf
Ill have a look at mine in morning have them all labeled
Ill have a look at mine in morning have them all labeled
cheers for the help guys need to get this thing up and running :)
is it spec1 or spec2?
Spec 1 r33 cheers for the help
Have e full pin out here but its balls to type the whole lot, to power the ecu up you need to:
feed power to pins:
58(battery power feed)
49&59 (ign power feed)
to ground pins:
50&60
hope that helps
Have e full pin out here but its balls to type the whole lot, to power the ecu up you need to:
feed power to pins:
58(battery power feed)
49&59 (ign power feed)
to ground pins:
50&60
hope that helps
thats perfect lets hope iv noise to moro thanks again for the help :)
if you need full pin out just give me your nr and ill text you the pic of the diagram im on 085 7796399
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.