PDA

View Full Version : First time slider



shtones
30-03-13, 22:01
http://cars.donedeal.ie/for-sale/cars/4715713

After a lot of cars with blown headgaskets and dodgy clutches we finally found our first drift car :) if any one has any recomendations on what to do etc would be appreciated as want to get her track ready as soon as possible :)

Darren
30-03-13, 22:27
strip it out to lighten that fucker up

shtones
30-03-13, 22:30
Haha shel be stripped fully out including dash soundproof etc, welded diff, bucket seat, hole in boot floor, hydraulic handbrake, thats about all i can think of :)anything else that you could remove to lessen weight?

thehatchet
30-03-13, 23:18
Haha shel be stripped fully out including dash soundproof etc, welded diff, bucket seat, hole in boot floor, hydraulic handbrake, thats about all i can think of :)anything else that you could remove to lessen weight?

Cut the door change the windows. Good luck with her

shtones
31-03-13, 10:58
Cut the door change the windows. Good luck with her

How do you mean cut the door? Thanks lad :)

thehatchet
31-03-13, 12:48
How do you mean cut the door? Thanks lad :)

Take off the door card and cut any unwanted metal you can see. The window motor weigh a ton. Ill throw up a pick later if you want?

shtones
31-03-13, 13:54
Take off the door card and cut any unwanted metal you can see. The window motor weigh a ton. Ill throw up a pick later if you want?

That would be brilliant thanks, im going to start today before work taking out fromt and back seats, i hope not too difficult :D

Eoin k
31-03-13, 18:56
Make sure you get rid of all the sound deadening. Weights a ton!

shtones
31-03-13, 23:31
Make sure you get rid of all the sound deadening. Weights a ton!

I will do eoin thanks lad, should i take out aircon system. and i read someplace that i should wire up a new fan to a switch,?

D.Daly
01-04-13, 02:07
Manifold and flywheel makes some difference to the 23 2.5.best of luck with her man:)

paulshox
01-04-13, 08:26
i had a 520i before...ur best bet is to have plenty of grinder disks ready and get everything cut out ha,even the likes of the sunroof,take it all out

shtones
01-04-13, 18:54
Just wondering if anybody knows the best and cheap way to get extra lock? Thanks

shtones
08-04-13, 11:36
.....

ford 2
08-04-13, 13:05
Plenty a lock there..you'd wanna learn first before you need extra lock and mods like that..coils, welder and seat time

DaveM-sport
08-04-13, 13:36
E39s have reasonably good lock out of the box. I you wanted to, add some wheel spacers and cut back the lockstops abit and it'll give you abit more.

An M5 steering box will help too as its quicker.

The front suspension setup on them is abit tricky to get loads of lock without ending up with a stupid amount of postive camber on the leading wheel so easiest thing to do for a start is fit some camber adjustable top-mounts or camber plates.


Good stiff coilovers are the most important thing you'll do to a 5 series to make it a good slider though as they are very soft to begin with!
A shorter diff would probably be the next in line after that like any BM

shtones
11-04-13, 05:48
finally managed how to upload pictures :D So picked up this beemer 523 with tax and test still on it. Got it home and then began the fun part :) First of all I put it up on blocks to make work easier underneath (not most safety conscious person!)

http://i1322.photobucket.com/albums/u576/Diarmuid000/image_zps3204dc5f.jpg

I began by removing the front and rear crash barriers which weighed a fair bit!

http://i1322.photobucket.com/albums/u576/Diarmuid000/image_zpsbcecd242.jpg

I then set upon tackling the inside of the car due to bad weather! Removed seats, sound deadening, windows motors and door cards and anything that added weight really :D

http://i1322.photobucket.com/albums/u576/Diarmuid000/image_zps11f57868.jpg
http://i1322.photobucket.com/albums/u576/Diarmuid000/image_zps26ac8a6d.jpg
http://i1322.photobucket.com/albums/u576/Diarmuid000/image_zps5a001ce1.jpg

I then got a notion to spray the wheels luminous orange and green and yellow and add the first sticker :D

http://i1322.photobucket.com/albums/u576/Diarmuid000/image_zps42c6d1f5.jpg
http://i1322.photobucket.com/albums/u576/Diarmuid000/image_zps9fa2294c.jpg

Thats about it for now due to working nights for the next while, picking up a hydro, bucket seats, harnesses and a deepdish steering wheel friday and i'll change break pads and give it a service for luck :D

shtones
13-04-13, 09:40
Gt a bit of time yesturday so i first of all fitted the welded diff!

http://i1322.photobucket.com/albums/u576/Diarmuid000/image_zps90a08cd2.jpg (http://s1322.photobucket.com/user/Diarmuid000/media/image_zps90a08cd2.jpg.html)

I then fitted new break pads. As. The others ones were near metal :D

http://i1322.photobucket.com/albums/u576/Diarmuid000/image_zpscc5b9cad.jpg (http://s1322.photobucket.com/user/Diarmuid000/media/image_zpscc5b9cad.jpg.html)

I then cut out the boot floor whhere the spare wheel was!

http://i1322.photobucket.com/albums/u576/Diarmuid000/image_zps2af3f899.jpg (http://s1322.photobucket.com/user/Diarmuid000/media/image_zps2af3f899.jpg.html)

I also picked up two 4 point harneses and a hydro :)

http://i1322.photobucket.com/albums/u576/Diarmuid000/image_zps8454e0c7.jpg (http://s1322.photobucket.com/user/Diarmuid000/media/image_zps8454e0c7.jpg.html)

http://i1322.photobucket.com/albums/u576/Diarmuid000/image_zps17403e3a.jpg (http://s1322.photobucket.com/user/Diarmuid000/media/image_zps17403e3a.jpg.html)

Nexht i need to plum up hydro, fit properly the harneses, get more wheels!, wire up the extra fan, remove thermostat, get bucket seats, put on a straight-through exhaust service it, and get some track time :D

DaveM-sport
13-04-13, 13:13
No need to remove the thermostat if there's nothing wrong with the the cooling system.

shtones
13-04-13, 14:56
No asfaik now problems hopefully anywyas, :D but would it be not better to take it out dave?

abceire
13-04-13, 16:20
Maybe look into some skinny tires , small wheels too, easier to keep spinning, do a track day, it will show you what else you need , I love strut braces, might be grid to gave a rear one one you have cut the floor out.
Also might not be good to have full straight thru. Exhaust, you might need some back pressure, my old omega 3000 didn't like when I took the cats and middle boxes out. Also places you bring it like model lo might have noise restrictions.

DaveM-sport
13-04-13, 19:02
No asfaik now problems hopefully anywyas, :D but would it be not better to take it out dave?

If its staying cool and at a good temperature while drifting so far, I see no need to remove it. Running without it can sometimes do more harm than good.

shtones
14-04-13, 04:50
If its staying cool and at a good temperature while drifting so far, I see no need to remove it. Running without it can sometimes do more harm than good.

It hasnt being drifted yet lad haha, i know what you mean, someone mentioned drilling ten holes in the thermastat and then leaving it in has worked wonders?

Eoin k
14-04-13, 09:12
That's what I've done to mine. The temperature never went over normal the last day out. Takes longer to get the car up to temperature though. Maybe just try 6 holes first.

shtones
14-04-13, 17:50
Thats perfect ill try that eoin thanks :)

shtones
22-04-13, 15:42
Picked up this bucket seat and a deepdish steering wheel yesturday getting there slowly but surely :D

http://i1322.photobucket.com/albums/u576/Diarmuid000/Facebook/Mobile%20Uploads/931381_562410813779480_994131364_n.jpg (http://s1322.photobucket.com/user/Diarmuid000/media/Facebook/Mobile%20Uploads/931381_562410813779480_994131364_n.jpg.html)

Eoin k
22-04-13, 21:53
Have the same wheel and boss kit in mine. Boss seems cheap but does the job fine. Fair play man-stick at it.

shtones
22-04-13, 23:03
thanks lad ya was only like 20e haha, few bits now to do before tynagh on the 19th time is flying. need to find 17s badly for the front :D

shtones
20-05-13, 12:33
Small bit of an update!

Got the car finally ready for driftfest in tynagh

http://i1322.photobucket.com/albums/u576/Diarmuid000/Facebook/Mobile%20Uploads/944333_572493359437892_1970500355_n.jpg (http://s1322.photobucket.com/user/Diarmuid000/media/Facebook/Mobile%20Uploads/944333_572493359437892_1970500355_n.jpg.html)

had an absolute ball of a time for my first time drifting. No problems all day until the end when it landed on its roof haha, bit of work to do like puling and belting but good news is car runs perfect will run a dignostic check just incase, bad pictures but here how she sits now!

http://i1322.photobucket.com/albums/u576/Diarmuid000/Facebook/Mobile%20Uploads/943481_572835702736991_296199281_n.jpg (http://s1322.photobucket.com/user/Diarmuid000/media/Facebook/Mobile%20Uploads/943481_572835702736991_296199281_n.jpg.html)

sideways-theonlyway
20-05-13, 12:51
Ah shit lad, but sur thats drifting! :afro:

You hit grass rut and flip or what? Hopefully no major harm done and everyone's alright.

shtones
20-05-13, 12:54
Was just drifting into the corner and hit the edge of the track and flipped, ya all is okay. One big mistake was that we didnt lower the dar so was our own fault, looking foward to superdrift in june now :)

sideways-theonlyway
20-05-13, 13:01
Unlucky, she'd be fairly wavy alright without been lowered, at least you have your first rollover over and done with!

shtones
20-05-13, 13:15
Ya it was grand at the start as was only getting used to drifting but once we got the hang of it and started to go faster thats when it started to get rocky, its all a learning curve :)

Eoin k
20-05-13, 14:59
didnt realise that was you that flipped the car. sit her down for june and slide away again.

shtones
20-05-13, 15:35
Well it was the lad that sat in with me lad :D I left it running yesterday for 30mins and temperature was sitting in the centre as usual so im hoping everything and underneath is grand. I have to find someone to take out a windscreen off another 523 and fit it for me as i havent the correct tools.

Stevo
20-05-13, 15:41
Ya were flying yesterday (no pun intended)

shtones
20-05-13, 15:55
Haha only got the hydro fitted the night before so was nervous pulling it first time but tried our best, knuckle down down and get it ready for june now :)

shtones
22-05-13, 00:26
began working on the car straight away today for superdrift in june :) we first of all relocated the hydro as i wasnt to happy on its location. We then set about tackling the windscreen and the dents :D

Before
http://i1322.photobucket.com/albums/u576/Diarmuid000/Facebook/Mobile%20Uploads/image_zpsd171edc7.jpg (http://s1322.photobucket.com/user/Diarmuid000/media/Facebook/Mobile%20Uploads/image_zpsd171edc7.jpg.html)

After
http://i1322.photobucket.com/albums/u576/Diarmuid000/Facebook/Mobile%20Uploads/m_zps9de4f20e.jpg (http://s1322.photobucket.com/user/Diarmuid000/media/Facebook/Mobile%20Uploads/m_zps9de4f20e.jpg.html)

really happy with how it turned out just a quick lick of paint now be grand. plans for the week are lower the car to prevent flipping it again, new shocks in front, more tyres, build a trailer and possibly fit a roll cage but might hold off on that till driftfest again :)

shtones
22-05-13, 08:02
http://i1322.photobucket.com/albums/u576/Diarmuid000/image_zpsc989e558.jpg (http://s1322.photobucket.com/user/Diarmuid000/media/image_zpsc989e558.jpg.html)