View Full Version : Extending 180sx lower arms?
Foxyfenlon
23-03-13, 15:10
I'm thinking of extending the front lower arms on my 180 instead of buying s14 ones..
So my question is how much longer should i make them if i don't want to exceed 4 degrees camber with the top mounts adjusted nearly fully to the outside?
Or has anyone done this if so did it work ok??
Just buy s14 ones job done
Foxyfenlon
23-03-13, 15:36
I'm a farmer (tight as fuck) and i work in steel fabrication now do you see why :p
Smokey Bear
23-03-13, 15:37
Make them adjustable?
20mm about but remember ul need longer track rods then too
Foxyfenlon
23-03-13, 16:07
Make them adjustable?
That's not a bad idea lad i'll definitly look into it,
anybody have any idea where i'd get a suitable rose joint to make them adjustable?
Foxyfenlon
23-03-13, 16:12
20mm about but remember ul need longer track rods then too
Cheers yeah i wasn't sure if they'd be long enough allrite,
That won't be a major issue anyway..
jasus ya finally admitted that ur tight as fuck:p:kiss:
Foxyfenlon
23-03-13, 16:54
jasus ya finally admitted that ur tight as fuck:p:kiss:
I never denied either though did i ha :p
Just drill new holes in the subframe.I've mine moved out 25mm and im running 5 degrees with s14 bottom arms on a 180
Foxyfenlon
23-03-13, 22:30
Just drill new holes in the subframe.I've mine moved out 25mm and im running 5 degrees with s14 bottom arms on a 180
Are the anti-roll bar links and the tension rod not at a bit of a stretch then?
Or do they still bolt up ok?
haydomiata
23-03-13, 22:58
you can get the rose joints in ferns eng afaik get onto ryan lad hel tell ya
Foxyfenlon
23-03-13, 23:18
you can get the rose joints in ferns eng afaik get onto ryan lad hel tell ya
Sound i'll be up there next week nd i'll see what they have or make..
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.