View Full Version : JZX90 Mark II
Well I'm always on here so I said I would threw up a bit of info and a few pics.
I'm sure ye all know the car as I got it off a member here on the site and the previous owner was also a member on here.
Anyways heres the spec it hasn't changed much but I'm just going to save up and then go at the engine! The weather is Shit but I will get up more pics when I get it all waxed up when it clears up!
-Apexi Hybrid Fmic
-HKS air filter
-Apexi N1 Cat back and decat
-Apexi rad cap
-JZX100 dash cluster
-HKS coilovers
-Grooved discs
-Project Mu pads
-L.S.D of some sort
-Solid diff mounts
-Vertex front lip
-Vertex skirts
-A/m rear bumper (dont know make?)
-Roof spoiler
-Rolled/Flared rear arches
-Sparco wheel with boss kit
-18 wheels not certain on the make? (9.5j rear) (8.5j front)
-Metal plates with flip brackets
http://i14.servimg.com/u/f14/17/14/91/32/32102410.jpg
It went threw nct there the other day and just failed on the cat but I got one sorted and retest is on monday so all going well! :D I picked up a few parts for it some highly illegal plates (guards going to love em), picked up a very very fresh Bride Brix II just waiting on new low rails to come in from Japan now! I have new wheels bought also I have to wait another 3 months for them to arrive over from Japan, but there man sizes so they will be mega wide! :) Also treated her to a full service, new bearings, few bushes and fresh tyres! Kit had to come off for test! It was a wee bit too low! http://i70.servimg.com/u/f70/17/14/91/32/46672_10.jpg
http://i70.servimg.com/u/f70/17/14/91/32/54000910.jpghttp://i70.servimg.com/u/f70/17/14/91/32/48155210.jpghttp://i70.servimg.com/u/f70/17/14/91/32/37450110.jpg
That's a fair cool looking bus. How long have you owned it??
wheels should look awesome on it.. get some better pics up
niall s14a
06-03-13, 17:14
Are you gonna get over fenders for it or flare the arches? Either way them wheels are gonna sit out by a mile! Fair play for goin that wide, should look awesome when it's finished
Taught u wud never put pics up ha, wheels will look mental when there on :) there a night mare of a car to fit big wheels, i wuda had to do major work on that car to fit the work emitiz the time, anyway best of luck with her and illl look forward to keeping an eye on this thread and see what you do :)
Not really sure about the front splitter but i reackon the wheels will really transform it and should look the tits
That's a fair cool looking bus. How long have you owned it??
About 6-7 weeks now I say! Just getting bits sorted now and get it right!
wheels should look awesome on it.. get some better pics up
Yeah when I get test I wish clean it up fully and get full pics
Are you gonna get over fenders for it or flare the arches? Either way them wheels are gonna sit out by a mile! Fair play for goin that wide, should look awesome when it's finished
The archs are already flared nicely on it and going to get fibreglass front wings if the wheels have too much poke! Yeah you have to go wide as possible and stretch the tyres out!
Taught u wud never put pics up ha, wheels will look mental when there on :) there a night mare of a car to fit big wheels, i wuda had to do major work on that car to fit the work emitiz the time, anyway best of luck with her and illl look forward to keeping an eye on this thread and see what you do :)
Yeah was bit late getting them up man! Yeah I will have a pain fitting them 11j on the back will test me! Ha yeah keep an eye man I'm excited about this myself!
Not really sure about the front splitter but i reackon the wheels will really transform it and should look the tits
Well if I keep it until next year I will go get a new kit make it look my own ya know
copeyhagen
06-03-13, 18:26
my 100 chaser had a serious amount of archwork on the rears and the 11j -5 weds were out by a good inch!!
http://img440.imageshack.us/img440/6053/chaser6.jpg
http://img541.imageshack.us/img541/8678/chaser4.jpg
nice car though, lookin forward to seein the wheels fitted :)
Look's well James, Best of luck with it.
Your a man after my heart putting them wheels on you car :) it looks the job
mattybyrne2008
06-03-13, 19:18
Nice wheels man very nice.. Johnny was saying the cat might be bit different if it is let me know I have one at home you could try
Nice wheels man very nice.. Johnny was saying the cat might be bit different if it is let me know I have one at home you could try
Yeah I have the lift free tomorrow so I will know then. Yeah I might need it! I'm getting seeing if healys hks one out of the 180 will do the job either
my 100 chaser had a serious amount of archwork on the rears and the 11j -5 weds were out by a good inch!!
http://img440.imageshack.us/img440/6053/chaser6.jpg
http://img541.imageshack.us/img541/8678/chaser4.jpg
nice car though, lookin forward to seein the wheels fitted :)
-5?? :eek: thats serious, thats a lot arch work done too! Looks amazing though
very nice car you have dude!
ive always liked those wheels, it should look great with them under it!
celicacrasher
07-03-13, 15:34
looks good love big cars.where did u get the plates made
looks good love big cars.where did u get the plates made
Eire plates! There called Jap Specials or something?
Looks good wheels will make a big difference i have been lookin for them sort of plates myself.. I have a cat there if you want to try it drop me a pm
Wheels are goin ta look mental on it .. Your goin ta have few late nites ta get them rears ta fit .. Best a look fella with it savage car
Ive always had a sweet spot for 4 doors, looks good now, just need the wheels.
Would love one of these, fair play :)
Once your 9.5j aren't in the negative offset you fit no problem, stretch tyre and some negative camber and it will be sweet
Anyways 3 days after I got it threw NCT and put fresh tax on it, I heard the unmistakeable ''knock knock'' I hoped for the best but no the oil pump starved itself and it was the big ends! It was only the 5th crank that was scored but still hardship. So after a long time and thought and research I decided I would go with the newer 1jz which has single turbo standard and vvti which is always better for less lag and much easier to upgrade the turbo when I get my hands on more money! :D
I was looking high and low for a good clean 1jz but none could be got without getting one imported in from japan! :( So I got onto Dave at japanese performance and he sourced me an immaculate vvti 1jz with a fresh timing belt and water pump! :D
http://i82.servimg.com/u/f82/17/14/91/32/59931811.jpg
Picked up a new lightweight DriftCulture flywheel and clutch kit for it also from sc86!
http://i82.servimg.com/u/f82/17/14/91/32/32412_10.jpg
Also got a 6 point takata harness from WANGAN-JZX, will set the bride off nicely!
http://i82.servimg.com/u/f82/17/14/91/32/93126110.jpg
Sick to hear about the engine lad , Great to see the work goin into it I had great plans for it but had my mind set on a 100 even before I bought that one so had to get one.
Yeah its rough enough but its fixable! Yeah I was just after a 4 door would have loved a 100 but I'm after falling in love with this now!
Right lads so here are the wheels landed and test fitted! Need more rolling and that but its just a sample! Excuse the picture quality and the dirt of the car and it is missing the skirts. But here we go.
http://i70.servimg.com/u/f70/17/14/91/32/11755810.jpghttp://i70.servimg.com/u/f70/17/14/91/32/12366710.jpghttp://i70.servimg.com/u/f70/17/14/91/32/12346610.jpghttp://i70.servimg.com/u/f70/17/14/91/32/12366410.jpg
http://i70.servimg.com/u/f70/17/14/91/32/11510510.jpg
Fiarly sit out well anyway. I had 10.5's et24 on there with 255 if that's any use for you to gauge. Did you get it running yet?
Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.