r32 4 door drift project

[cobcorsa]

hows it going guys said id make a thread about my 32 , i had this car about 2 years and before the superdrift day had literally drove it about 3 times. about a year ago i resprayed it but due to only being able to spray at home i had to use cellulose paint which is utter shit so it will be getting a proper respray in 2 pack soon, it was going to be used as a road car but never got around to putting it on the road . being sick of looking at it go to waste i decided to get into drifting on track , entered into superdrift last week and i was doing shit for the first half of the day but after 4ish i really started getting back into the grove after 2 years away from any form of rwd after 5 i was getting all the corners linked and really enjoying it, so the car is going to be 100% drift car never to see road again

bits done so far
-6 bran new coilpacks
-new plugs
-all oils
-removed manual boost controller
-fitted hydro
-disabled alarm

to be done for tynagh
-respray ( proper one this time )
-disable hicas , have s body subframe here just need arms
-new back pads
-more lock
-gut the interior
-perspex windows
-2 fixed back seats
-spray inside artic white or something
-fab up a bumper bar
-set up the suspension as best i can
-bgw
-petrol :)

i probably wont get half this stuff done before tynagh but ill do my best

and a pic from just after the respray before the paint reacted

[cobcorsa]

.........

[Darenm]

Chris just please please dont ruin it other than that glad to see ya getn use out of it
get on to driftescort on here if u want mega lock billy has insane lock in his 32

[slithertooth]

Well done man, gutsy drift car... Andrewr32 is looking for a rear screen if your taking it out give hima shout

[pinny]

Thats one of the nicest 32's ive seen !

[driftescort]

Cool car, shame to see a nice 4 door R32 being pulled apart for the track though.

[Cooldrft]

You were flying in wgh from what i saw.
Car looked savage on track :cool:
I have the following parts.
Adjustable rear toe arms + new polybushes to replace the hicas ball joint in the hubs.
Practically new set of yellow stuff pads for rear brakes.
Alloy bushes to tilt the subframe for more grip.
P.m for extra lock options.

[Simon]

looks cool man, pity its been taken off the road but sure could be worse. good job..

[tweek]

Is this Shane's old car?if so I was wondering where it went
Also don't put in Perspex windows they will fade and crack with age and sun light use polycarbonate or lexan as everyone else calls it

[nikkisixx69]

that is awesome!!!

[seanie R.33]

Thats very tasty!!

[grange]

noooo dont wreck it by trackn it =[ thats hot as fuck

[grange]

p.s be careful if your takin the front window out. i will buy it. :P

[alan moy]

Looking cool Chris best of luck with it

[cobcorsa]

thanks guys iv been over it in my head a million times wether to track it or not but i figure if i sold it id just end up getting a m3 for track with the money and there is plenty of them about and i want something that gets noticed out there,

@grange- i wont be selling any of the glass sorry especailly not the windscreen my biggest fear is cracking that as i know they are near impossible to get :(

[cobcorsa]

You were flying in wgh from what i saw.
Car looked savage on track :cool:
I have the following parts.
Adjustable rear toe arms + new polybushes to replace the hicas ball joint in the hubs.
Practically new set of yellow stuff pads for rear brakes.
Alloy bushes to tilt the subframe for more grip.
P.m for extra lock options.

thanks man ill pm u in a week or so

[cobcorsa]

Is this Shane's old car?if so I was wondering where it went
Also don't put in Perspex windows they will fade and crack with age and sun light use polycarbonate or lexan as everyone else calls it

yeah its shanes old one , thanks for the advice on the windows :)

[Danny O' Sullivan]

I sold u them wheels of my 180..they fit well anyway haha..car looks well man

[grange]

dalm it. worth a try :D

[AndrewR32]

best of luck with the project. bought a shit load for mine yesterday, so will be getting the ball rolling this week!

[cobcorsa]

Yeah danny thats them im selling then on this week tho. No real updates on this yet in currently busy trying to get my workshop spraybooth place up and running . Got a new devilbiss gun on order too . Hope to start prep work on her friday

[mayo s14]

thats a cool fuckin 32 .. dont track it thou ..get sumthin else nd make it stand out from the rest .. be such a shame ta destroy this !! :(

[Shane_s]

Looking Awesome dude! Glad to see it finally being put to good use! sitting on my drive for far too long so it was!!

[stevokr32]

Red is a savage colour in a r32 ,will make a nice driftmachine

[KenR32]

sucha cool car, shame to see it tracked!

[cobcorsa]

Ok so this car is going down a completely different route. Kit gone big wheels gone being resprayed and road going . So far iv got the wheels sorted 16's . Car is currently being sanded to bare metal for a shit hot respray in true black

[cobcorsa]

.......

[Dave]

Glad to head its going to be road going! Looking forward to seeing it finished! Are you going with a gtr front?

[cobcorsa]

Iv been looking for a gtr front for 3 months now and cant find one so its gonna have to be standard :(

[grange]

Aw yes the track idea made me cry. what size are your wheels and offset

[cobcorsa]

They be 10.5 wide . Cant remember the offset but its negitave . And also has 25mm adaptors on so much arch work is being done lol

[grange]

They do take a good sized wheel though in fairness. I'm going to have fun fitting my 9j -40s on the back. Keep us updated

[jdmjimmy]

Why cant I see any pics in this thread~?

[thetangerine]

Glad to hear its goin back on the road not enought 32's on the road anymore never mind 4 doors good luck wit the build pal

[cobcorsa]

Well I finally got a gtr bumper after months of looking . Iv put my name down for the new years drift day in wgh. So I have one month to finish the bare metal respray . Recon the gearbox . 180sx rear subframe. Get some more skid wheels. Get my hsd coilovers and fit them and buy and fit bucket seat and harness but iv to respray the girlfriends mx5 first (nearly finished) then roll on the best new years ever :)

[DannyRB25]

dude if your stripping interior, can i have plastic trim on drivers pillar where gauges are normally mounted mine cracked :(

[cobcorsa]

Sorry bud its still going on road im just giving her one last track day. If I write it off ill get in touch lol