ps13 silvia k rebuild

[murray sr22]

hi not many would have seen this car as i havent got the chance to drive it as the engine has blown on me twice and rebuilds arnt cheap so at them moment it is sitting in my shed with no engine. the engine is up in drd motorsport getting rebuild ive gone for a blacktop sr20 but im making it a sr22. ive been gathering bit for this since the engine went 2years ago.

it started out as a standardish silvia with coilovers 16s advans and few other bits and alot of people would no it as i bought it of elite autos and it was sitting in there field for about 2 years before i bought it??

anyways after the first engine went i decided i would change it a good bit as never rely like the standard look of them so i started to sand down the body and painted it in subaru raven black met. also fitted a new origin stremline kit along with a new set of rota grid drifts 8.5 in front and 10s in the back.

spec is as it stands now
exterior
origin kit
rota grids
projector headlights
amber corner lights
silvia grill
roof spoiler (not fitted)
carbon wrapped door pillars

interior
gtr r32 seats (mint)
deep dish steering wheel
hydro (not fitted)
blitz boost gauge
heads up display
cunt of a dvd screen in the dash

running gear
apex preformance sr22 stroker kit
nismo bearings
oem oil pump
oem n1 big ends
full oem gasket set
oem water pump
oem oil spray bars
oem oil pick up
apex adjustable cam pulleys
apex baffled sump
bottom end fully balanced
BC 272 cams
BC valve springs
BC titantium retainers
driftworks rocker arm stoppers
sard 740cc injectors
greddy inlet plenum
sard fuel pressure reg
drilled and grooved disk all round
project mu pads all round
nismo 2 way diff fully rebuilt
solid subframe bushes
exedy paddle clutch
uprated flywheel
rb25 box with conversion plate
short shifter
custom prop
alluminium rad
autobann 88 front mount
hks 2835 top mount turbo kit
tial external wastegate
screamer pipe
custom elbow and downpipe (to be made when engine fitted)
decat
mocol 15 row oil cooler and relocation kit with thermostat
theres probly loads left out as its all up in drd getting built will update spec and pics off all the bits when i get up again?

plans are to get it are to get it running mapped and ran in on dyno and dynod to see what break and torque it makes

buy full japspeed arm kit to make it handle better and set up by wkd

get it through a test

paint and seam seal fully underneath ( half done already)

paint and seam seal boot floor

paint and seam weld engine bay ( going gold met)

fully compund and buff the full car as its gone dusty and faded from sitting up

make all new stainless frount mount pipes

make new air intake

get new gauges for inside (probly defi hopefully)

tidy up interior as was bit rough from lying up (flocked dash and door cards)

get boot plastics as it came with none


any way this is how the car looks now in the shed

[murray sr22]

http://s1143.beta.photobucket.com/user/murraysog/media/silvia002.jpg.html

http://s1143.beta.photobucket.com/user/murraysog/media/silvia002.jpg.html#/user/murraysog/media/silvia003.jpg.html?&_suid=136061023162307457266550562898

http://s1143.beta.photobucket.com/user/murraysog/media/silvia002.jpg.html#/user/murraysog/media/silvia006.jpg.html?&_suid=136061023162307457266550562898


this is how it looks in the shed now

[johnnysil80]

pics not workin?

[murray sr22]

this was it finished 2 years ago

http://s1143.beta.photobucket.com/user/murraysog/media/phone014.jpg.html#/user/murraysog/media/phone014.jpg.html?&_suid=136061124366704668951814006018


http://s1143.beta.photobucket.com/user/murraysog/media/phone014.jpg.html#/user/murraysog/media/phone015.jpg.html?&_suid=136061124366704668951814006018

http://s1143.beta.photobucket.com/user/murraysog/media/phone014.jpg.html#/user/murraysog/media/phone016.jpg.html?&_suid=136061124366704668951814006018

http://s1143.beta.photobucket.com/user/murraysog/media/phone014.jpg.html#/user/murraysog/media/phone018.jpg.html?&_suid=136061124366704668951814006018


this is what it was like when i got the car from elite

http://s1143.beta.photobucket.com/user/murraysog/media/Facebook/cars/58594_141291975911858_8191601_n.jpg.html?sort=3&o=10#/user/murraysog/media/Facebook/cars/58594_141291975911858_8191601_n.jpg.html?sort=3&o=10&_suid=136061175645301995976630119688

[rps13Carlow]

Really clean machine, some finish on the body

[seanyboy s14]

That was a fine looking machine .don't see to many ps13's anymore would love one myself

[derek89]

Jesus man that will have some spec on it wen finished....is it staying a road car?

[pole drift]

Copy the IMG code dude

[seanie R.33]

Thats a lovely ps some spec,needs some nice dish tho!

[subzero]

jesus it turned out well fair play !!

http://i1143.photobucket.com/albums/n622/murraysog/phone014.jpg

[murray sr22]

Yes staying a road car there only 4 stud hubs on it so in future I'm going to go 5 stud and a set on Meisters under it probly stay with 10s in the back I'm going to get the back arches rolled so I can go more low

[murray sr22]

rite so got awhile this morning at this and got all the seam all cleaned rust treated and acid etch primed then seam sealed and brush a thick layer of high buid primer over them so i can sand a pile off to make the seams look tidy as i hate the messy way they come from factory?


http://i1143.photobucket.com/albums/n622/murraysog/silvia001.jpg


http://i1143.photobucket.com/albums/n622/murraysog/silvia002-1.jpg


http://i1143.photobucket.com/albums/n622/murraysog/silvia003-1.jpg

that all i got done will hope to have all done and primed tomorrow?

[gpparts]

Clean car..

[murray sr22]

so I havnt updated this in a long time as I dint want small updates so heres 1 big 1

I stripped the full car down as I wanted to paint the bay and seam seal and stonechip all the inner arches and underneath. while I was stripping it all out I wanted to paint the subframe and I got a bit carried away and painted every thing underneath I could except all the arms as there not going to stay in it once I save up il be getting a full japspeed or driftworks arm kit for it.
anyways heres the pics
bay stripped
http://i1143.photobucket.com/albums/n622/murraysog/Facebook/silvia%20rebuild%20part%203/1084101_577981685576216_1258842848_o.jpg (http://s1143.photobucket.com/user/murraysog/media/Facebook/silvia%20rebuild%20part%203/1084101_577981685576216_1258842848_o.jpg.html)

front arch primed
http://i1143.photobucket.com/albums/n622/murraysog/Facebook/silvia%20rebuild%20part%203/1091721_577984918909226_1259094720_o.jpg (http://s1143.photobucket.com/user/murraysog/media/Facebook/silvia%20rebuild%20part%203/1091721_577984918909226_1259094720_o.jpg.html)

http://i1143.photobucket.com/albums/n622/murraysog/Facebook/silvia%20rebuild%20part%203/1020101_577985008909217_1281173958_o.jpg (http://s1143.photobucket.com/user/murraysog/media/Facebook/silvia%20rebuild%20part%203/1020101_577985008909217_1281173958_o.jpg.html)

front arch painted
http://i1143.photobucket.com/albums/n622/murraysog/Facebook/silvia%20rebuild%20part%203/1091540_577985475575837_819549375_o.jpg (http://s1143.photobucket.com/user/murraysog/media/Facebook/silvia%20rebuild%20part%203/1091540_577985475575837_819549375_o.jpg.html)

http://i1143.photobucket.com/albums/n622/murraysog/Facebook/silvia%20rebuild%20part%203/1090598_577985368909181_452439804_o.jpg (http://s1143.photobucket.com/user/murraysog/media/Facebook/silvia%20rebuild%20part%203/1090598_577985368909181_452439804_o.jpg.html)

[murray sr22]

boot floor primed
http://i1143.photobucket.com/albums/n622/murraysog/Facebook/silvia%20rebuild%20part%203/1092717_586662168041501_36857544_o.jpg (http://s1143.photobucket.com/user/murraysog/media/Facebook/silvia%20rebuild%20part%203/1092717_586662168041501_36857544_o.jpg.html)

rear arches painted
http://i1143.photobucket.com/albums/n622/murraysog/Facebook/silvia%20rebuild%20part%203/989289_586656464708738_2006626635_o.jpg (http://s1143.photobucket.com/user/murraysog/media/Facebook/silvia%20rebuild%20part%203/989289_586656464708738_2006626635_o.jpg.html)

cross member painted
http://i1143.photobucket.com/albums/n622/murraysog/Facebook/silvia%20rebuild%20part%203/1352683_592462230794828_726710428_o.jpg (http://s1143.photobucket.com/user/murraysog/media/Facebook/silvia%20rebuild%20part%203/1352683_592462230794828_726710428_o.jpg.html)

subframe primed
http://i1143.photobucket.com/albums/n622/murraysog/Facebook/silvia%20rebuild%20part%203/711204_592464660794585_500235951_o.jpg (http://s1143.photobucket.com/user/murraysog/media/Facebook/silvia%20rebuild%20part%203/711204_592464660794585_500235951_o.jpg.html)

boot floor painted
http://i1143.photobucket.com/albums/n622/murraysog/Facebook/silvia%20rebuild%20part%203/1070146_592464817461236_663456368_o.jpg (http://s1143.photobucket.com/user/murraysog/media/Facebook/silvia%20rebuild%20part%203/1070146_592464817461236_663456368_o.jpg.html)

bay primed and struts resealed
http://i1143.photobucket.com/albums/n622/murraysog/Facebook/silvia%20rebuild%20part%203/1290978_594063930634658_340362487_o.jpg (http://s1143.photobucket.com/user/murraysog/media/Facebook/silvia%20rebuild%20part%203/1290978_594063930634658_340362487_o.jpg.html)

bay painted Cadbury purple
http://i1143.photobucket.com/albums/n622/murraysog/Facebook/silvia%20rebuild%20part%203/1353281_594121610628890_290079087_o.jpg (http://s1143.photobucket.com/user/murraysog/media/Facebook/silvia%20rebuild%20part%203/1353281_594121610628890_290079087_o.jpg.html)

loom and bits back in
http://i1143.photobucket.com/albums/n622/murraysog/Facebook/silvia%20rebuild%20part%203/1353086_595254460515605_252733136_o.jpg (http://s1143.photobucket.com/user/murraysog/media/Facebook/silvia%20rebuild%20part%203/1353086_595254460515605_252733136_o.jpg.html)

how she sits now waiting to get time to fit the intercooler and make all new stainless pipes
http://i1143.photobucket.com/albums/n622/murraysog/Facebook/silvia%20rebuild%20part%203/1230209_596696253704759_775883121_o.jpg (http://s1143.photobucket.com/user/murraysog/media/Facebook/silvia%20rebuild%20part%203/1230209_596696253704759_775883121_o.jpg.html)

[JohnRaff]

Just get 9.5 or 10s on the front and she be perfect! looks real tidy in those pics, good to see you putting it back together :)

[murray sr22]

finally the main 1 ive got my engine back from drd motorsport in galway and the work is just top class now its not fully finished yt still good few bits to fit and he wants to skim the head a small bit more for compression he has pics of the full build. I will upload when I get them all off him. I will be painting a rocker cover for it before I fit it
my sr22 engine
http://i1143.photobucket.com/albums/n622/murraysog/Facebook/iOS%20Photos/969760_573671792673872_1509060056_n.jpg (http://s1143.photobucket.com/user/murraysog/media/Facebook/iOS%20Photos/969760_573671792673872_1509060056_n.jpg.html)

will update again soon when I get all the pipes and collect my rb conversion box of shane in elite autos and she goes back up to drd

[DaveO59]

That purple bay looks bleedin' savage! Would love to do somethin similar to my yoke , It'll be some machine when you've it all back together.