PDA

View Full Version : My 2013 S14.5 Driftfest/Superdrift Seat time car



Stevo
16-01-13, 22:11
Right alot of lads know i have this and for once im doing fuck all buying parts, upgrading bits, then losing interest in a car.
This is as ready as it gets really, the ex MG crash repairs/Paul murphy S14.5 and been honest she's well put together with all the right bits needed..

Due to work commitments i have to work saturdays, so hopefully i can find somebody to fill in so i can do a few rounds this year.

Spec that was listed and bits that have been figured out since.

1998 S14 Silvia shell

ENGINE/Transmission

SR20DET vvt engine

Custom engine loom

Wozner Pistons

New followers

Cosworth Head Gasket

ACL race series bearings

Nismo 550cc Injectors

Brand new 2871R Turbo

Braided turbo lines

Adjustable FPR

Alloy radiator with twin fans

Adjustable actuator

New 100mm Front mount intercooler core with custom pipework

3" Turbo elbow

3" Downpipe

3" Decat

Driftworks shotgun back section

OMEX 600 series ECU mapped to 410HP by TDP.ie

Exedy clutch

Nismo lightened flywheel

SR20 Gearbox (for now)

Welded diff


EXTERIOR

Fiberglass vented bonnet

30mm vented front wings s14.5

50mm Rear quarters

Side skirts

New back bumper ordered

S15 headlight blanks

S15 front bumper

External cut off


INTERIOR

6 Point through dash bolt in cage with welded X door bars

Fire extinguisher

Push button start

Cut off switch

Center panel with wipers, fuel pump ect on switches

Hydro handbrake

OMP Bucket seat on adjustable rail

Schroth harness

OMP Dished suede steering wheel

Drycell battery

Again Custom Brendan stone loom all factory loom and switches removed



SUSPENSION/HANDLING

Driftworks geomaster front hubs

Driftworks rack spacers

Driftworks tie rods and ends

R33 brakes all round with braided lines front and rear

Brembo rear grooved discs

K-Sport Coilovers with adjustable top mounts

Adjustable castor arms

Adjustable Toe arms

Adjustable camber arms

R33 rear subframe with hicas lockout


WHEELS/TYRES

SSR integrals 17x9.5 just powdercoated (now changed for Volks)

VOLK GT7's 17X9 ET+2 all four corners

Maxsport front tyres

25mm Spacers on the rear none on the front




PICS (NOT ME DRIVING)
http://i47.tinypic.com/v5d6pk.jpg

http://i49.tinypic.com/fu01fr.jpg

http://i48.tinypic.com/3537gnb.jpg


Few bits done since i picked it up, Turbo lines changed.
De-stickered
Wheels changed

And to be fair nothing else needs to be done its ready to slide, ill try it with the diff ratio fitted for mondello on the 10th and gauge if i need a shorter ratio diff after that.

Wheels changed
http://i45.tinypic.com/98da1v.jpg

Stickers removed

http://i45.tinypic.com/2qxm63d.jpg

http://i46.tinypic.com/166k51j.jpg

http://i45.tinypic.com/34pe7ww.jpg

http://i47.tinypic.com/110vf54.jpg

http://i45.tinypic.com/wamyz7.jpg

jonnyrb
16-01-13, 22:20
Well wear stevo, Decent spec on her, looks far better without stickers

JDM
16-01-13, 22:20
Sweet yoke stevo and ill set my watch to see how long till I see the for sale/breaking thrend ha best of luck with the car

Deco84
16-01-13, 22:26
Sweet yoke stevo and ill set my watch to see how long till I see the for sale/breaking thrend ha best of luck with the car

Il take a few bits :P

Stevo
16-01-13, 22:51
Well wear stevo, Decent spec on her, looks far better without stickers

Cheers jonny, yeh i really like the look of it now!


Sweet yoke stevo and ill set my watch to see how long till I see the for sale/breaking thrend ha best of luck with the car

Cheers bud, noooo wont be broke ever by me. Ive saved a few yolks from been chopped lately aswell, the 180sx was broke for this :wink:


Il take a few bits :P

Jaysus im not breaking that many cars lol

slithertooth
16-01-13, 23:11
Prices as per rules

Stevo
17-01-13, 12:43
Prices as per rules

Bahahaha get the fuck :D

japman
17-01-13, 14:40
Needs a 4.1

Stevo
17-01-13, 16:21
Needs a 4.1

For mondello id say the 3.7 in it will be hard work, but the rest of the tracks in ireland 3.7 should be grand, maybe 3.9

Famous jh
17-01-13, 16:46
For mondello id say the 3.7 in it will be hard work, but the rest of the tracks in ireland 3.7 should be grand, maybe 3.9

You homo! 400hp an you plan on going everywhere in 2nd gear!

Ah Stevo :afro:

Stevo
17-01-13, 17:01
You homo! 400hp an you plan on going everywhere in 2nd gear!

Ah Stevo :afro:

Well fuck you no more boost http://www.driftireland.com/forum/showthread.php?t=34577

Happy now :p

Its the SR box im more worried about, till i can get a bigger one in it!

derek89
17-01-13, 17:24
Looking well stevo...wen u taking her out.?

slithertooth
17-01-13, 17:28
Bahahaha get the fuck :D

:D Enjoy man........ wanted away from the nissan but I want something like that badly. If that can't bring a smile to your face its time to jump in the coffin. Good luck with er

bart
17-01-13, 19:20
4:1 and 3rd..
Who needs 2nd
I did mondello in 3rd with 4:1 no bothers lad..

But lol at jh..
Sig worthy

Stevo
17-01-13, 20:23
Looking well stevo...wen u taking her out.?

Cheers derek, 10th feb


:D Enjoy man........ wanted away from the nissan but I want something like that badly. If that can't bring a smile to your face its time to jump in the coffin. Good luck with er

Lol true enough rory


4:1 and 3rd..
Who needs 2nd
I did mondello in 3rd with 4:1 no bothers lad..

But lol at jh..
Sig worthy

Ya may learn to do it 4th sideways now :wink:

aka pete
17-01-13, 20:40
Nice one Stevo, with that power u'll not be needin a shitty 4.3 lol, if ur offloadin, keep me on mind..
Besta luck with her lad, looks the biz.. nice spec!

mini180sx
17-01-13, 22:43
Best of luck with her... all going well we will have the 2 cars out for mondello on the 10th

Chuck_g
17-01-13, 22:54
Nice job lad....great car that :) I may be out on the 10th myself, might see you above.

LarZ
17-01-13, 23:08
Well wear man. This car has proven itself many times :) Looking forward to seeing you out on track on the 10th of Feb :)

Stevo
17-01-13, 23:12
Nice one Stevo, with that power u'll not be needin a shitty 4.3 lol, if ur offloadin, keep me on mind..
Besta luck with her lad, looks the biz.. nice spec!

I will need it if im going RB box pete :(


Best of luck with her... all going well we will have the 2 cars out for mondello on the 10th

Both cars WILL be out mini :cool:


Nice job lad....great car that :) I may be out on the 10th myself, might see you above.

Cheers chuck, love it just hope i can drive it :p Do mondello hunny!

mini180sx
17-01-13, 23:16
See if this old 180sx of yours is any good ha

Stevo
17-01-13, 23:30
See if this old 180sx of yours is any good ha

You selling if its not :D

mini180sx
18-01-13, 00:05
Ah I might do ya looking to buy

Stevo
18-01-13, 00:22
Ah I might do ya looking to buy

Always looking to buy, love that 180!

coakley
18-01-13, 00:55
i pulled 4th in the wet in mondello wit that 4.1 and almost half the power :P shel be well able for it

the dancer
20-01-13, 22:53
best of luck with er stevo ,i loved every minute of driving it ,as 4 2nd gear 3;7 just works mint in it 4 smaller tracks ,i did a day in mondello and badly needed a 4:1 thats what i ran in mondello with that engine in yellow car ,u will fill mondello with shmoke on the 10th if its dry , c u their ill try get in ur door :]

Stevo
20-01-13, 23:33
best of luck with er stevo ,i loved every minute of driving it ,as 4 2nd gear 3;7 just works mint in it 4 smaller tracks ,i did a day in mondello and badly needed a 4:1 thats what i ran in mondello with that engine in yellow car ,u will fill mondello with shmoke on the 10th if its dry , c u their ill try get in ur door :]

Cheers paul!!! Yeh ive a 4.1 sorted off one of chucks mates so hopefully i get it before mondello, jaysus dont get in my door be a shame to put a mark on the pink panther :D

Stevo
31-01-13, 00:02
i pulled 4th in the wet in mondello wit that 4.1 and almost half the power :P shel be well able for it

Surprised the diff did'nt break the weld, steve wonder with the same stick welder would have done it better, took a qualified welder over an hour to fix that diff :mad:

Anywho, Mondello booked, diff fixed as best it could have been fingers crossed it holds out, refitted along with rear locking collars, and harnesses.. Tyres on the skid rims and good to go i hope haha. Needless to say i aint running any kit in mondello :D

japman
31-01-13, 00:09
Me n Paul were in 3rd all d way round mondello wit 3.7 diff in d wet

Stevo
31-01-13, 00:15
Me n Paul were in 3rd all d way round mondello wit 3.7 diff in d wet

Yeh but unless its wet it would be fairly hard on the clutch and standard sr box if its dry! 3.7 on nearly every other track bar mondello practice days is what ill be running

Stevo
03-03-13, 22:43
Well first day out done in mondello on the last drift day there, car has plenty of power :D Although the amount of grip it has will take some getting used too, loving the front driftworks setup aswell.

Also driftfest logged now first year in comps, gonna be an experience anyway haha

http://i48.tinypic.com/358chtc.jpg

http://i46.tinypic.com/2z3sawx.jpg

http://i49.tinypic.com/20qaomf.jpg


Also been busy buying bits and pieces for it.

Origin skirts
Origin rear bumper
Rocket bunny rear spoiler
New rear quarters
RB25 gearbox

Picked up spare intercooler and rear lights aswell

Dunno which roof spoiler to go for, thinking dmax??

Really cant make up my mind if i should keep it the Audi rs4 blue or just go plain 2pak black for sheer easy of fixing it after tapping/breaking kits and the likes :confused::confused:

Darenm
03-03-13, 22:56
Good job stevo cant wait to see it with the new bits all kitted up should look sweet

Stevo
03-03-13, 23:10
Good job stevo cant wait to see it with the new bits all kitted up should look sweet

Cheers bud :)

Also picked up minty HKS coilovers, oil catch can, and some works vs aswell.. FML money pit haha

Stevo
07-03-13, 20:20
Im a broke man :eek:

Big thank you to Wes @ WKD Imports for hooking me up with the RB-SR adapter plate and some lovely new CS2 Coliovers :cool:

Stevo
20-03-13, 00:22
Coilover are in, just slight height adjustment before it goes for a new suspension set up for rd 1..

http://i47.tinypic.com/2z7mrdf.jpg

Adapter plate on the way also RB box should last bit longer than 400hp through the sr box :)

Stevo
26-03-13, 14:38
She's gonna be rough haha

http://i48.tinypic.com/r7rknn.jpg

PeterT
26-03-13, 23:06
jaysus thats rougher than something id have :P have ya no fiberglass to throw on her/

Stevo
26-03-13, 23:13
jaysus thats rougher than something id have :P have ya no fiberglass to throw on her/

Origin skirts

Uras rear bumper

Driftkits S15 front bumper

All different colours hahaha :D

Rocket bunny boot spoiler, and waiting on dave to tell me when the Dmax roof spoilers come in have it ordered 2 weeks now :huh:

Had no choice but change the drivers door as it stopped opening from the outside, cant get into it when its on a trailer :)

Stevo
08-04-13, 21:39
Right so the whole crew worked flat out at the car all week for fermoy, got her tracked up and finished. Massive thank you to shane bradley for doing the bumper bar and fire wall before round 1. Lads if you want a proper custom made bumper bar let me know and ill pass numbers for shane. Cannot stress how it saved the car from a reshell :cool:

Drove like a tit all morning on saturday, took alot of getting used too the car and where too initiate on the first corner in fermoy, but bound to happen in first season driving new tracks..

Got slightly better after lunch on saturday and managed to finish up 6th ama qualifying, was well chuffed.

Few pics before i stacked it :D

http://i47.tinypic.com/r7lpw1.jpg

http://i50.tinypic.com/wbxp34.jpg

http://i46.tinypic.com/2ihuse8.jpg


And the beginning of it all going wrong in Ama twin battles

http://i45.tinypic.com/2w5kh0w.jpg

http://i48.tinypic.com/fmoxvp.jpg

Only minor damage which is a whooper bonus as i was flat in 2nd running 3.7 diff, bumper bar really did its job and saved the car!!!

Big thanks too all for the help and tips over the weekend, and loan of tow wagons ect, roll on round 2 in citywest :afro: