PDA

View Full Version : 2013 IDC Rules & Regulations


Cooldrft
14-12-12, 01:26
2013 IDC Rules & Regulations, Are now available for download.
http://www.archweb.ie/kieran/IDC-regs-2013.html
http://sphotos-c.ak.fbcdn.net/hphotos-ak-prn1/543093_619182808095378_1388105167_n.jpg
Facebook page ,Like and share :wink:
http://www.facebook.com/pages/Irish-Drift-Championship/286599238125812?ref=ts&fref=ts
barman
14-12-12, 09:47
good to see wont be entering idc this year but now i know at least what is needed for idc and i can start preping the car lol
what monies allow lol
Quealy
14-12-12, 15:02
Hope they don't go too mad with the roll cage rules, says main hoop needs to be 45x2.5, id say more than half the cars in Ireland have the full cage made of 43mil OD pipe cus its all that's available in local hardwares.
aka pete
14-12-12, 17:04
any dates/venues yet apart from mondello in april?
S14a johno
14-12-12, 19:05
in the terms of fixed seat, is that include a slideing rails ?
DaveM-sport
14-12-12, 19:25
Hope they don't go too mad with the roll cage rules, says main hoop needs to be 45x2.5, id say more than half the cars in Ireland have the full cage made of 43mil OD pipe cus its all that's available in local hardwares.

Get some 44.6mm stuff and a good coat of primer and paint and it'll be mint :D


Front legs that bend around the dash (dash dodgers) are not permitted.

Looks like there's going to be more drama if dash-dodgers are permitted again?


All main hoops regardless of material should be constructed from 45x2.5mm or 50x2mm tube minimum.A-pillar bars, door bars, rear stay bars and all additional diagonal and brace bars must be constructed of 38x2.5mm or 42x2mm.

I'm guessing it should have "at least" for the measurements of the main hoop and all other bar sizes?



Nice to see the rules out reasonably early anyway :)
JStone
16-12-12, 21:18
Hope they don't go too mad with the roll cage rules, says main hoop needs to be 45x2.5, id say more than half the cars in Ireland have the full cage made of 43mil OD pipe cus its all that's available in local hardwares.

It also says the material must be seamless CDS or T45, all DIY rollcages will need proof of purchase for cage tubing to be logged.
JStone
16-12-12, 21:23
I'm guessing it should have "at least" for the measurements of the main hoop and all other bar sizes?



Nice to see the rules out reasonably early anyway :)


Using tube that exceeds minimum specs is not a problem.
Chuck_g
18-12-12, 00:10
It also says the material must be seamless CDS or T45, all DIY rollcages will need proof of purchase for cage tubing to be logged.

Mine is in the car since day one, receipts long gone in the bin if they ever even got one?? Has also passed 3 years scrutiny..........is this acceptable?
alan180sx
18-12-12, 15:14
My cage also in my car wit few years no receipts or anything for the piping in it

Passed prodrift scrutiny this year...

If I got go changing my cage I won't b takin part in IDC
JStone
19-12-12, 09:00
Any cars that passed last years logging should be fine for 2013, the new cage and bulkhead rules are in a full year now so no excusses for building new cars outside the current specs!

If your car has its engine moved back it will need to be moved forward to meet the bulkhead rule introduced at the start of last year.
sideways_madness
19-12-12, 11:00
i had the rules from last years rules and regs printed off and as far as i mind they were the same regarding the size of cage tubing for main hoop
cruising_r32
10-01-13, 20:34
Is there a website for the IDC?
Have the event dates been released for 2013?
Cooldrft
10-01-13, 21:57
Is there a website for the IDC?
Have the event dates been released for 2013?
http://sphotos-c.ak.fbcdn.net/hphotos-ak-prn1/543093_619182808095378_1388105167_n.jpg
Only a facebook page for now.
http://www.facebook.com/pages/Irish-Drift-Championship/286599238125812?ref=ts&fref=ts

Dates are due to be released mid next week.
6 rounds in the championship this year + they wont be clashing with the BDC :cool:
bart@jdm
14-01-13, 21:40
plenty of work ahead of me, better get cracking
driftjunkies
18-02-13, 18:09
stickin this up for a buddy hes got a bolt in cusco 7 point dash dodger,he wants to whats needed for the cage to pass idc regs, can he get somebody thats doing cages to just add in a new front section and door bars or has he to get a full cage welded into it instead, the regs say it has to be fia approved bolt in but i doubt the cusco one is fia approved, anybody confirm this as well thanks