View Full Version : e36 m3 (first time euro) :/
so after much abuse from the nissans i have tried my hand at BMW,
it came handy money so why not,
she on NI plates 94 m3 3.0
dont have pics from day i got it have it little over month now so this is wat i have done,
car was standard
stripped it,
fitted coilovers,
seat
hydro
blanked off sunroof
fitted bonnet pins
boot clips
heres few pics so far. . . .
tinted lights and painted up the grill. .
http://i46.tinypic.com/2u9mkqa.jpg
K sports in
http://i48.tinypic.com/run33p.jpg
http://i46.tinypic.com/14msy28.jpg
two yokohama pradas for front
http://i49.tinypic.com/2cgnbbt.jpg
seat in
http://i48.tinypic.com/11cehw6.jpg
http://i47.tinypic.com/30m8l69.jpg
sunroof blanked off
http://i45.tinypic.com/pufja.jpg
http://i47.tinypic.com/r89i10.jpg
http://i47.tinypic.com/5lusmf.jpg
http://i48.tinypic.com/2zi3d3q.jpg
http://i50.tinypic.com/ve5ilj.jpg
so its about time i got back onto this.
i dont know what the feck the first photo is :/
so anyway i bought a 4:1 out of E28 for tomasS13 on here,
so took out my diff and to switch the e28 internals in
pics
e28 diff out of its casing
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0714_zps19587aad.jpg (http://s1274.photobucket.com/user/LennyMorrissey/media/PICT0714_zps19587aad.jpg.html)
nikkisixx69
10-05-13, 10:35
so after much abuse from the nissans i have tried my hand at BMW,
it came handy money so why not,
she on NI plates 94 m3 3.0
dont have pics from day i got it have it little over month now so this is wat i have done,
car was standard
stripped it,
fitted coilovers,
seat
hydro
blanked off sunroof
fitted bonnet pins
boot clips
heres few pics so far. . . .
tinted lights and painted up the grill. .
http://i47.tinypic.com/331dny1.jpg
^^^ lol wut???
stripped the m3 casing and gave it a good clean
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0715_zps535adb9f.jpg (http://s1274.photobucket.com/user/LennyMorrissey/media/PICT0715_zps535adb9f.jpg.html)
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0716_zpsab7fe945.jpg (http://s1274.photobucket.com/user/LennyMorrissey/media/PICT0716_zpsab7fe945.jpg.html)
off the collect seal and then put it back together
^^^ lol wut???
i reckon on of the lads was here haha never staying logged it again
ok so gave the casing a bit of paint to tidy it up
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0717_zps6d631cbc.jpg (http://s1274.photobucket.com/user/LennyMorrissey/media/PICT0717_zps6d631cbc.jpg.html)
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0718_zpsd7f49acc.jpg (http://s1274.photobucket.com/user/LennyMorrissey/media/PICT0718_zpsd7f49acc.jpg.html)
diff back in case just waiting on a seal should have it monday
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0720_zps52d0935b.jpg (http://s1274.photobucket.com/user/LennyMorrissey/media/PICT0720_zps52d0935b.jpg.html)
this how it looks now
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0719_zps035d89f8.jpg (http://s1274.photobucket.com/user/LennyMorrissey/media/PICT0719_zps035d89f8.jpg.html)
ah this is the bmw you where tellin me about. best of luck with it
Sound job ya can't beat a good m3.
Was there much work to fitting the 4.1 diff
thanks grange, it is fairly simple mike just pull out everything basically and swap it over :)
Must keep an eye out for a diff now have a 323 iam using there while I do the e30 it would prob give it the extra bit it needs
ok so picked up some wheels off tomas13 on here sold on the motorsports
when I got them
http://i1274.photobucket.com/albums/y436/LennyMorrissey/keskin1_zpse9460ee0.jpg
changed the colour of two
http://i1274.photobucket.com/albums/y436/LennyMorrissey/keskin2_zps094c9a17.jpg (http://s1274.photobucket.com/user/LennyMorrissey/media/keskin2_zps094c9a17.jpg.html)
<a href="http://s1274.photobucket.com/user/LennyMorrissey/media/keskin2_zps094c9a17.jpg.html" target="_blank"><img src="http://i1274.photobucket.com/albums/y436/LennyMorrissey/keskin2_zps094c9a17.jpg" border="0" alt=" photo keskin2_zps094c9a17.jpg"/></a>
http://i1274.photobucket.com/albums/y436/LennyMorrissey/keskin3_zpsda797887.jpg (http://s1274.photobucket.com/user/LennyMorrissey/media/keskin3_zpsda797887.jpg.html)
and heres one fitted on the car needs a polish in a bad way lol
http://i1274.photobucket.com/albums/y436/LennyMorrissey/keskin4_zpsfabfe025.jpg (http://s1274.photobucket.com/user/LennyMorrissey/media/keskin4_zpsfabfe025.jpg.html)
Hard to beat the reliability of NA. 4.1cwp makes some job of them! Wheels look class on it man, good work :afro:
thats a nice fit! i was expecting them to be poking out from under arches...
right time to get moving on this been sitting up a while now with nothing done
so bought quick release boss kit for it
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0716_zpsb78e2808.jpg
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0715_zps1d43cc73.jpg
so my aim is do get a little job done everyday and update as much as possible,
so I got new amber corners from Latvia fairly cheap as I couldn't find second hand pair
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0717_zps022524df.jpg
Nice build lad youve a nice bit done already :) love the wheels too make a fine job of it
Nice work, is it for track or road use
Thanks track wil have it back home tomorrow to strip it out for full cage
ok so got the car home coukdnt wait to fit the quick release so fitted it before I started to gut the inside in order to get cage fitted
need to drop seat back and down a little sould be perfect then
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0702_zpse6215ace.jpg
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0703_zps65b936e9.jpg
small update again , getting motivated after seen its turn out today.
getting small idea of what I have imagined
so test fit the front wheels , fairly close to coilover , ,maybe small spacer might see me out of it
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0711_zps0d5960df.jpg
car was really faded so gave it a spruce up didn't turn out to bad either for a quick run
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0710_zpse8b8dd73.jpg
also fitted my new amber corners I picked up few weeks back
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0709_zps1d21db4a.jpg
and last one for today
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0708_zps5485913f.jpg
next step is to fit the diff and make up an exhaust for it, that's all for today :) some one might like it too lol
What's the wheel make ?
Keskin KT1s picked them up from a member on here
finally got the hydro mounted where I wanted, didn't feel right with the small upright handle so I took some measurements and a mate offered to make one up in his lunch out at his work place.
I don't think its a bad job at all for the info I gave him :) just gotta tidy up weld when I get my mig this week, anyway some pics
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0712_zpscd895fea.jpg
and a better view
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0713_zps3864ee35.jpg
that's all for now hopefully this week I can get exhaust system made up on the car
It looks well on those wheels Lenny.
It looks well on those wheels Lenny.
thanks, thinking about 17inch banded steels for spares for the rear
finally gave in and got rear bolts for diff
so i ended up buying 12 torex bolts
6 washer shields
and 6 nuts for prop
a lovely 242.80 euro
its like im fran and they got me good with that pool cue. stupid shitty main dealers
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0657_zps93317c0d.jpg
Why on earth did u buy them from a dealer ???
U could have just used normal hardened steel bolts thats what i done after the original ones sheered off there a much handier job
Didn't want to take the chance , incase they break .
Piece of mind this way
Iad defo recammend getting a few hardined steel bolts to have as spares i bring a few with me on every trackday just incase they were to ever break again. Be sickiner to waist a drift day over them.
Iad defo recammend getting a few hardined steel bolts to have as spares i bring a few with me on every trackday just incase they were to ever break again. Be sickiner to waist a drift day over them.
thanks for heads p really need to get a paush on with things and get out
Bit more info on the diff? Is that a medium or large case diff that comes in the 3.0 and what model e28 did the internals come out of?
Bit more info on the diff? Is that a medium or large case diff that comes in the 3.0 and what model e28 did the internals come out of?
Medium in the 3.0s, large only came in 3.2s
Bit more info on the diff? Is that a medium or large case diff that comes in the 3.0 and what model e28 did the internals come out of?
its my original case with e28 internals, from 81 model welded
finally gave in and got rear bolts for diff
so i ended up buying 12 torex bolts
6 washer shields
and 6 nuts for prop
a lovely 242.80 euro
its like im fran and they got me good with that pool cue. stupid shitty main dealers
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0657_zps93317c0d.jpg
Next time you're buying go here: http://www.schmiedmann.com/
Also the difference between OEM and OE is often just a bmw box.
Looking good though.
Interior gone?
yes sorry gone with so time.
perfrect thanks be handy to have few updates later today
POW!!
finally got time between work to get shit done all diff shafts prop mounted.
wishbones and hubs modified along with new rods and ends and new front links
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0663_zps5cb8593f.jpg
pics of the hubs painted up before I put them back together
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0666_zps4778bf4f.jpg
made some hub converters for the front to take 5x114,3 wheels.
fecking wheels are catching front bumper and filler bar so im not sure what I will do
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0665_zps1a90f531.jpg
also made a start on the exhaust. im using 2.5 stainless steel , two new flexi pipes
and 8mm rod for hanging the exhaust
also made new flanges from 8 mm steel plate while I was at it
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0668_zps3d85caac.jpg
so im planning on getting everything buttoned up on it in the next week and sent off for cage to be fitted
boy how plans never work out, moved to unit anyway getting to it slowly but surely
got arches for it which will do for now as i cant afford to spend a fortune on big duck lab ones
heres them fitted rough and ready
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0673_zpsfnpdsmkm.jpg
got rid of the m3 mirrors off it and fitted some dtm style ones i had in the attic
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0674_zpsk46tffv7.jpg
removed these cheap crappy pins for latches
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0671_zpsyv5tdrtk.jpg
for these better tidy flushed latches
http://i1274.photobucket.com/albums/y436/LennyMorrissey/PICT0672_zpsgonvoyk9.jpg
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.