FULL BOLT IN 410hp RB20 CONVERSION *LOOK*

[skinnynphats200]

Perfect for road or track car. Toying with the idea of selling this as a complete conversion. If it doesn't sell as a whole I will be keeping it because if i'm going to sell it I would need it gone quite soon and don't have time to be waiting on bits to sell here and there......so here it is

- RB20 DET - serviced and coolant flush after every day out
- Nistune ECU running 410bhp and 375 lb/ft @ 1.3 bar with the below setup - mapped on 03/10/2012
- Hybrid HKS Gt2535r: Full trim 2871r core with the 2535 compressor housing & .64 2535 exhaust housing. Very fast spool - little or no lag - full boost at around 4K rpm mark, dyno sheet here to prove this. Built by AET turbos and has only done a handful of days since rebuild this year, mint condition. Have receipt. Best turbo that can be got for the RB20!!
- Upgraded copper and Multi Layer Steel turbo, manifold & Downpipe gaskets installed
- Sard 550cc injectors
- Pink label Rb25 AFM
- Big Frount mount intercooler with piping
- Japspeed Engine Damper
- HKS intake and filter
- Oil cooler and filter relocation kit
- Upgraded stainless valve cover bolt kit installed
- Modified HKS superdragger full exhaust (no baffles all have been removed)
- HKS EVC 5 Boost controller with the 2 maps. 1) 375 bhp @ 1.1 bar. 2) 410 bhp @ 1.3 bar
- Os Giken triple plate clutch & lightweight flywheel
- Gearbox and prop if needed

Conversion will come with the engine loom, intake and exhaust manifolds, alternator, power steering, fan, belts, ancillaries etc...everything that is needed ready to drop into another car

This is a complete bolt in conversion that doesn't require to be mapped just bolt in to a rolling shell and drive.
This is the setup that is running in my car right now and can be seen running and driving before being removed also.

I am looking for €3500 or £2850 ono, please correct me if i'm wrong on the price but it seems fair to me considering what it cost me to do it. Majority of the parts were all bought new also. If you were to price up everything on its own, then ecu and map it would cost a lot more.

Thanks,

Kyle

[Stevo]

You really dont know what you want to do with that car lol

[Darenm]

if u want 2 sell turbo seperte pm me man seriously interested

[Mick K]

As a person working in sales for nearly 10 years its not everyday I get to say this to someone else but you would actually sell your parents I'd imagine! Some dude

[skinnynphats200]

You really dont know what you want to do with that car lol

Well I wanted to sell it but looks like that's not going to happen due to people being tight and thinking because of the recession they can offer you feck all so the second option is now an option and looks like the route i'll be taking with it. If everything works out....it will be awesome!!!!


if u want 2 sell turbo seperte pm me man seriously interested

Highely unlikely but yes will keep you in mind dude


As a person working in sales for nearly 10 years its not everyday I get to say this to someone else but you would actually sell your parents I'd imagine! Some dude

lol. You would know all about it Mick! ;)

[skinnynphats200]

Oh and I have to add.....best sig on DI mick. I spend waaaayy too long looking at it every time I see one of your posts :cool:

[skinnynphats200]

up ya go.....

[p murf]

I know ur not breakin it but if it turns out u do id b seriously interested in that clutch!!

[skinnynphats200]

I know ur not breakin it but if it turns out u do id b seriously interested in that clutch!!

Will keep ya in mind lad

[slithertooth]

What are you gonna replace it with man? It does seem a lot but there is a serious bargain to be had there,

[PeterT]

I sold a car running that sorta power for that much!! ;)

[skinnynphats200]

What are you gonna replace it with man? It does seem a lot but there is a serious bargain to be had there,

Not sure yet Rory, toying with a couple of different ideas. Just want to get a move on as don't want to be building a car last minute like this year. There sure is, thanks dude


I sold a car running that sorta power for that much!! ;)

You sold the cef for 3.5K? Well that was very silly of you.......and i'm not silly so!ha - that's one difference. And the other; not ditching your cef or anything but there is a good bit better spec on this I think.
Thanks for the positive input though, im sure it will help the sale ;):kiss:

For anybody that would be interested.......all you need is a rolling shell with subframes, suspension and diff, bolt in this conversion and away you go

[skinnynphats200]

Bump....

[skinnynphats200]

Bump.....price drop €3350 ono

[skinnynphats200]

Bump.....€3200 ono

[skinnynphats200]

Mapping is 700 alone that doesn't need to be spent if you buy this conversion! It might seem like a lot but its really not for what your getting.
To the top :)

[skinnynphats200]

Really want this conversion gone now. Something I want has came up and I want to move on it. Anyone have any interest?

[skinnynphats200]

Again really would like this sold very soon! Anybody have any interest?

[skinnynphats200]

Bump....3100 ono

[skinnynphats200]

Bump....

[skinnynphats200]

Bump...

[DarkBlack]

you sellin the Turbo seperately?

[skinnynphats200]

Read the original post please! And also replies thereafter. Thanks

[skinnynphats200]

Bump......ONO

[slithertooth]

I have a Rolling shell for this!!!!!!!!!! :):):)

[skinnynphats200]

Would make a damn cheap 400hp road or track car for someone that's for sure......I don't understand what's wrong with lads these days. They would rather pay the same money on 'jdm tyte yo! baller dish!'......what's going on with the world Rory! :rolleyes::D

[Deco84]

Nobody has that money to mess with these days man simples be diffrent if it was buy it an drive it but there's only a few lads on the site it's a bargain to that could do the work themselves

[Benbimmer]

Really is for nothing considering what's coming with it, add in gem's shell and it's a serious project, do you do installments! :-)

[skinnynphats200]

Really is for nothing considering what's coming with it, add in gem's shell and it's a serious project, do you do installments! :-)

And majority of it is already assembled, bolt it in, connect loom and ancillaries and ecu, fluids....and your up and running!
I nearly would, collection on the final payment! :D

[PeterT]

Would make a damn cheap 400hp road or track car for someone that's for sure......I don't understand what's wrong with lads these days. They would rather pay the same money on 'jdm tyte yo! baller dish!'......what's going on with the world Rory! :rolleyes::D

JDM tyte to ftw :P

I'd say what lads are iffy about is the power can be got cheap out of a standard rb20, maybe they are afraid of going this route as they'd get more toque going down the rb25 route or something ?

[slithertooth]

Hope to see this car in action soon all the same.... If it was broke you would get your money back , just a waste on mapping and labour

[pole drift]

I sold a car running that sorta power for that much!! ;)

And what an antichrist it is on fuel, well if its driven easy its not too bad ;)

[skinnynphats200]

Bump.....

[skinnynphats200]

Bump...

[skinnynphats200]

deleted...

[skinnynphats200]

€2900.....

Will throw in rear subframe complete with hubs, arms, anti-roll bar, hicas lock bar, drop links, roll bar bushes, handbrake, handbrake cables, calipers, pads, discs.....was unbolted from the car as it sits, complete and ready to bolt into another.......

A rolling shell, front suspension and you have a full car!!!!!

[skinnynphats200]

Close this up please admin deposit taken on car