180sx road car project

[seanie R.33]

well lads picked up this few weeks ago off bryan h off here,really happy with shell is very clean,running gear is all healthy and interior is in good nick!here's current spec

T28r turbo out of a S15
2 way diff
uprated walbro fuel pump
Front mount
Apex gen 1 coilovers
Brand new catback
mint Bride drivers seat
water oil temp gauges
Quick release handbrake
Skyline GTR 4pot brakes
Ganador mirrors
BN sports front bumper
Uras side skirts
Uras Rear bumper

pic of it at home
http://i1180.photobucket.com/albums/x411/SeanieR33/image1.jpg
http://i1180.photobucket.com/albums/x411/SeanieR33/image-1-1.jpg
http://i1180.photobucket.com/albums/x411/SeanieR33/DSCN0609.jpg

http://i1180.photobucket.com/albums/x411/SeanieR33/image-1.jpg

so plans are
full bn sports kit have front bumper
50 mm chargespeed overfenders
big dish ssr professors im thinking at moment
326 power wing
roof spoiler
550 injectors
z32 afm
remap power fc or nistune
second bride recliner
defi gauges
re route wiring loom in front wing
few other small bits

and full respray in either blue,midnight purple gunmetal grey but opnions welcome

here is how it sits now ,hopefully progress will be quick on this,will be ordering all body panels for this in next week or two
http://i1180.photobucket.com/albums/x411/SeanieR33/DSCN0605.jpg

http://i1180.photobucket.com/albums/x411/SeanieR33/DSCN0608.jpg
http://i1180.photobucket.com/albums/x411/SeanieR33/DSCN0607.jpg
http://i1180.photobucket.com/albums/x411/SeanieR33/DSCN0606.jpg

all comments/advice welcome

[paddyb01]

Bn kit will be savage on this may keep a eye on this :D
Are you goin to spray the bay too?

[seanie R.33]

will leave the bay until very last might spray it some funky color,but that way down the line!

[Darenm]

Plans look good seanie good base to start with some mega dish equips would be mental :D

[seanie R.33]

Plans look good seanie good base to start with some mega dish equips would be mental :D

sound darren,wheals will be make or brake the car so will have to have a good think about it!:confused:

[ian g sr20]

Plans sound good.
No dout ull mke a good job of it

[fitzer]

tidy lookin car. i will defo be keeping an eye on this one man ;)

[K series steve]

very nice base car to begin with,going by your plans this will be a mental car,best of luck with it man!!

[richy180]

best of luck wit build lad!

[richy180]

best of luck wit build lad!

[jdmcraig]

plans sound good lad good luck with the build :)

[seanie R.33]

sound lads,have z32 arm and injectors sorted thanks to nikki,thinking about getting it mapped next week before buying any body panels and getting it sprayed!

[peteconneely]

good base man plans sound good, cant wait see it done good luck with it

[seanie R.33]

well have the kit ordered and car is getting dropped to painters during the week so a good push on with the car,have a few options in my head id like yer opinion on with the colour,

1/ a deep blue with gold miesters
2/ midnight purple chrome sp1's or gold miesters
3/ red with crome sp1's

cant make up my mind and the pressure is on now,opnions welcome?

[paddyb01]

well have the kit ordered and car is getting dropped to painters during the week so a good push on with the car,have a few options in my head id like yer opinion on with the colour,

1/ a deep blue with gold miesters
2/ midnight purple chrome sp1's or gold miesters
3/ red with crome sp1's

cant make up my mind and the pressure is on now,opnions welcome?

Id go midnight purple, theres a lad on this that had one on eurolines it was unreal, than sprayed it red cant think of his name il try find a pic

edit found a pic

http://i50.photobucket.com/albums/f338/paddyb01/2a7798p.jpg

[seanie R.33]

Ya midnight purple is gorgeous,that's Keith's car,he doin the work to my own car!

[paddyb01]

Ya midnight purple is gorgeous,that's Keith's car,he doin the work to my own car!

Its in good hands so mate

[seanie R.33]

well bit of a move on with this the car has been with keith (k1984w) getting all the body work done and painted in good time!Cant recommend kieth enough been very helpfull and patient with me making up my mind on things!

so far the car has got
50mm overfenders
bn sports rear bumper
bn sports side skirts

Must order a roof spoiler and on the look out for a vented bonnet if anyone has one!

just put a deposit on these hopefully collect them in four weeks when I'm back

18x11 -1

http://i1180.photobucket.com/albums/x411/SeanieR33/22424438.jpg

17x9.5 +18

http://i1180.photobucket.com/albums/x411/SeanieR33/9974942_2.jpg

[Darenm]

No.1 u have the best man on here spraying ur car his work is top class good choice
No.2 wheels will look crazy BN kit and big wheels will be a killer what colour u going?

[seanie R.33]

ya keith is top man for the job alright couldn't be happier with him!i won't say color until it's done as i tend to change my mind like the wind!hopefully keith will have updates in coming weeks!

[Darenm]

this always springs 2 mind when i think low and wide 180 joe ayala does it rite
326power wing is a must
http://i1198.photobucket.com/albums/aa454/Darenm1/523726_3966731534153_296065522_n.jpg

[seanie R.33]

ya it's gorgous car il never go that low tho ha!I must have 10 photos of it on my comp

http://i1180.photobucket.com/albums/x411/SeanieR33/TOD_HATCH_FRONT_QUARTER.jpg

[Darenm]

ya it's gorgous car il never go that low tho ha!I must have 10 photos of it on my comp

http://i1180.photobucket.com/albums/x411/SeanieR33/TOD_HATCH_FRONT_QUARTER.jpg

such a cool dude have been chatting 2 him on fb as cool as the car looks they drive them hard

[seanie R.33]

got car back yesterday off keith and picked up the sp1's on way,here's the result

http://i1180.photobucket.com/albums/x411/SeanieR33/photo2-2.jpg

http://i1180.photobucket.com/albums/x411/SeanieR33/photo3-1.jpg

http://i1180.photobucket.com/albums/x411/SeanieR33/photo1-1.jpg

http://i1180.photobucket.com/albums/x411/SeanieR33/302829_372673192817207_977016925_n.jpg

http://i1180.photobucket.com/albums/x411/SeanieR33/546884_372673009483892_1791381212_n.jpg

http://i1180.photobucket.com/albums/x411/SeanieR33/550145_372673129483880_173687004_n.jpg

http://i1180.photobucket.com/albums/x411/SeanieR33/526286_372673086150551_785664568_n.jpg

http://i1180.photobucket.com/albums/x411/SeanieR33/photo-2.jpg

[slithertooth]

Yup thats how to do it properly

[niall s14a]

Lookin good man. Few quid spent there. He's a tasty man with the paint and the wheels suit it down to the ground. Fair play

[seanyboy s14]

the cars looking well now, 326 power spoiler is what it needs imo

[sil8094]

unreal fair play

[paddyb01]

Wow thats savage now fair play

[Hakosuka]

Thank you for saving this!

Look's great!

[Deco84]

looks gorgeus man

[seanie R.33]

sound for the comment lads hopefully get better pics soon!

[derek89]

Car is looking lovely man...fair play. I'd be afraid to drive it now ha ha

[ian g sr20]

Looks savage with ya lad.
Wat size are the wheels

[Kruizer]

Awesome dude, well done !

[seanie R.33]

Looks savage with ya lad.
Wat size are the wheels

the rears are 18x11 -1 could probably do with a small spacer and the fronts are 17x9.5 +18 with a 25mm spacer which is too much but il be changing that to a 15mm spacer to clear the brakes

[Darenm]

seen it yesterday on keiths fb page thats how its done fair play seanie still think it needs a 336 power wing but still looks awesome

[kouki_kid]

Car looks well dude quick question for ya who did ya get the
Bn back bumper from??

[seanie R.33]

thanks got it off drive n style in roscommon

[kev.skyline]

thats lovely looking, some change from when it started out.
wheels are spot on too, good job dude!

[DarrenS15]

Car looks way better now, wheels really suit it

[jdmjimmy]

Seen this on keiths FB more people should take note of this and try head the same direction rather than going with the usual paddy spec wide arch's s body with 7j wheels.credit to ya lad best of luck with it

[DeanR]

sweet job seanie ya legend! :P

[ali-d1936]

Wa wa we wa, nice one lad

[seanie R.33]

sound for all the comments lads!

[fitzer]

agree with jimmy! need to see more cars like this and keiths knockin around not the usual uras rep kit and rota gtr job! fair play dude wheels really set it off

[180sxbreaker]

sean, the car is fuckin beautiful, serious road presence, and u did it right with the right lad doin ur work...top job, enjoy it now lad

[nikkisixx69]

absolut perfection , my fav kit (after kouki) , one of my favorite colors for an s-body, crazy wheels, just sooooo good! only thing that could better it is a dmax bonnet and 326 or g-corp spoiler :cool:

awesome work man!

[diggerdolan]

Car is looking amazing man! Cant wait to see some more pics!

[Smokey Bear]

Like a boss!

[seanie R.33]

When I get bit tired of it I will change it up a bit and go with 326 power wing and some shotgun pipes but for now I wanna get the power up a bit and few bits for the interior,it's still very much unfinished.Im waiting on extended exhaust hangers and must sort out the wheal figment and il get proper pics up soon,other ones are off the phone and don't really do the paint justice,sound again for the comments lads!

[doug]

some change in the car from something you wouldnt look twice at to some thing you want to keep looking at!

as for keith that painted it he seems to be a genius with a paint gun!!

[JP89]

Absolutely gorgeous Seanie!
Definitely the nicest 180 in Cork by a mile, sum paint job on her :)
Cant wait to see it around

[seanie R.33]

Sound jp if I see ya around balincollig il pull in for chat!

[evo44ever]

savage lookin car. red looks class a real head turner

[shane_c]

Now that is savage! will you have it on the road much? tasty combo you picked there!

[seanie R.33]

ya should have it on road most days have a run around for work as the 180 might not be so practical for throwing the toolbox into ha

[evo44ever]

i would nearly feel bad usin that car as a daily....

[rob_180sx]

Nicely done Seanie!

Looks the job! Love the colour! Looking forward to seeing it finished!

[rico180]

well bit of a move on with this the car has been with keith (k1984w) getting all the body work done and painted in good time!Cant recommend kieth enough been very helpfull and patient with me making up my mind on things!

so far the car has got
50mm overfenders
bn sports rear bumper
bn sports side skirts

Must order a roof spoiler and on the look out for a vented bonnet if anyone has one!

just put a deposit on these hopefully collect them in four weeks when I'm back

18x11 -1

http://i1180.photobucket.com/albums/x411/SeanieR33/22424438.jpg

17x9.5 +18

http://i1180.photobucket.com/albums/x411/SeanieR33/9974942_2.jpg


Feck ya anyway!!!!!!!!!!!😬😬😬
I was looking at them wheels of dave.... They look sweet on the car. What size tyres did you put on them??
Do they spin up easy enough?? Now that your 11J on the back. And did you have any issues of them rubbing the coilover on the inside?

[seanie R.33]

@rob thanks hopefully have it Sittin nicely at weekend and il get some better pics

@Rico Ha i wasn't leavin them 18x11 get away,Ya they spin grand and my car be standard enough,no no issue at all with rubbing,I'm not 100% on tyre size Dave put them on il check later for ya tho

[subzero]

Fair transformed that car! Looks savage. Keith is some boyo.

[rico180]

@rob thanks hopefully have it Sittin nicely at weekend and il get some better pics

@Rico Ha i wasn't leavin them 18x11 get away,Ya they spin grand and my car be standard enough,no no issue at all with rubbing,I'm not 100% on tyre size Dave put them on il check later for ya tho

Cheers mate. Ill will just give me an idea on what to get now.., because the ones I wanted are gone now ;):Dha,ha
They do look class on it!!!!!

[seanie R.33]

@Rico 265/35 18 on the rear but il be changing them to maybe 255/35 when I put on a spacer to get it Sittin nicely

[peteconneely]

looks unreal man credit to ya

[seanie R.33]

came home to these today,extended exhaust hangers,25mm spacers but will have to get new tyres before i can fit these and a set 6k hid's,anyone have bother with hid's in their 180?heard they can give bother?

http://i1180.photobucket.com/albums/x411/SeanieR33/47FE8118-BCA2-41ED-8999-D70ADCDB180C-4512-0000043ABC216980.jpg

[D-turbo-lad]

Ya as i said man i had. And cuppla lads i knw also. Always the driver's 1stick's on heads an wont dip. . . . Buh some other's may had the same problem

[Darenm]

Get raybrings dude they look the job and you wouldnt need hids

[seanie R.33]

Ya was planning on raybirgs anyway,tried to get some stretch on the front but the tyre centre failed with theses,off to Anthoney galvin this week to fit them and give her a service!

http://i1180.photobucket.com/albums/x411/SeanieR33/230CEF65-91CE-4F5B-A6FE-8DD67D294111-5381-000004F2C7B0B571.jpg

[danmoorhead]

money well spent!! its savage!!

[seanie R.33]

Thanks dan!

[ali-d1936]

That 225 looks lost on that wheel what is it the 9.5?

[seanie R.33]

Ya but the 235 that i have on has no stretch at all

[ian g sr20]

Thats tyre will go on no bothers to it ;).
We have a 225 here stretched onto a 10j

[ali-d1936]

I have 225/40 on my 10's on the front but they went on easy as, it will go on no problem but cant understand how the tyre place couldnt put it on?

[seanie R.33]

he had no bead blaster so was bit pain for him!

[seanie R.33]

Edit......

[seanie R.33]

Test fit the spacer today she is Sittin flush now but is very tight to fender,a skinnier tyre will have it Sittin perfect!!

http://i1180.photobucket.com/albums/x411/SeanieR33/D5A2DC86-4DE7-477B-BEA9-76E8CD6A9837-6349-000005930466439D.jpg
http://i1180.photobucket.com/albums/x411/SeanieR33/27F8F118-EB4B-4770-8D34-AFB72BAE86CF-6349-000005930E7F45BB.jpg

http://i1180.photobucket.com/albums/x411/SeanieR33/F4EE94F0-3FA7-4A81-ADE5-3BE91926E753-6349-00000592D72E0B8C.jpg

[niall s14a]

Test fit the spacer today she is Sittin flush now but is very tight to fender,a skinnier tyre will have it Sittin perfect!!

http://i1180.photobucket.com/albums/x411/SeanieR33/D5A2DC86-4DE7-477B-BEA9-76E8CD6A9837-6349-000005930466439D.jpg
http://i1180.photobucket.com/albums/x411/SeanieR33/27F8F118-EB4B-4770-8D34-AFB72BAE86CF-6349-000005930E7F45BB.jpg

http://i1180.photobucket.com/albums/x411/SeanieR33/F4EE94F0-3FA7-4A81-ADE5-3BE91926E753-6349-00000592D72E0B8C.jpg

Fair play lad the car is mint, but I don't understand why youd sit the arch basically on the tyre. Your after gettin it sprayed etc.. Why not leave it a little bit off the rim so you can actually drive the thing? The slightest bump in the road is gonna have you rubbin and destroying them nice arches

[seanie R.33]

That's why I'm goin to get skinnier tyre so it will sit behind the arch

[willie 180sx]

serious 180 lad,wheels are mint and that bn kits looks unreal!!

[Damien]

It's going to sit perfect with a skinnier tyre. It's great to see nice cars being put together rather than being broke.
If you haven't already, give those wheels a few coats of wax or some sealant, will make them alot easier to clean, and will stop the dirt eating into the nice dish.

[seanie R.33]

still didn't get a chance to take proper pics with the rain but took quick two while ago

http://i1180.photobucket.com/albums/x411/SeanieR33/67693E5E-3C16-473B-8B81-67DB142F84EA-7938-000007005E616532.jpg

http://i1180.photobucket.com/albums/x411/SeanieR33/DEE80D2F-4CFD-4B10-AE87-1A328B2F26CC-7938-000007001F199B23.jpg

[ian g sr20]

Seans car in @ carrigtwohill auto centre for a bit of work and fluid changes.
http://i898.photobucket.com/albums/ac189/anto180/20121128_113924.jpg
http://i898.photobucket.com/albums/ac189/anto180/20121128_144827.jpg
http://i898.photobucket.com/albums/ac189/anto180/20121128_142404.jpg
http://i898.photobucket.com/albums/ac189/anto180/20121128_120045.jpg
Exhaust rubbers needed as the bn bumper sits nice and low.
http://i898.photobucket.com/albums/ac189/anto180/20121128_105105.jpg

[ae86-connell]

Just saw this, unreal man, you need to call over with her

[seanie R.33]

Just saw this, unreal man, you need to call over with her

will do,have the kettle on!

[richy180]

couldnt have came out much nicer than this,,looks fab!!

[rmc]

What a transformation !!!!! Passed it outside Ian's place the last day nearly crashed stareing at it!!!

[seanie R.33]

New wheal fitted

http://i1180.photobucket.com/albums/x411/SeanieR33/52A4B594-E26B-44B1-AD95-0AA11942E0EE-2747-0000017EF7E1A4B4.jpg

And picked up a 3" elbow

http://i1180.photobucket.com/albums/x411/SeanieR33/7E0B31AB-479D-4456-9D6E-D57DC84E63A6-2747-0000017EFDAFD5C6.jpg

[seanie R.33]

Took spoiler off to see what it would look like,not really gone on the look myself

http://i1180.photobucket.com/albums/x411/SeanieR33/20130127_153638.jpg
http://i1180.photobucket.com/albums/x411/SeanieR33/20130127_153653.jpg
http://i1180.photobucket.com/albums/x411/SeanieR33/20130127_153710.jpg

Also fitted new gear nob and bride gear boot gaitor
http://i1180.photobucket.com/albums/x411/SeanieR33/20121225_142834.jpg

[shane_c]

Put the spoiler back on! i was washing my silvia in dessies one night an you drove in front of me..serious presence on the road this

[seanie R.33]

Sound lad spoiler back on and all wasnt gone on it myself!

[Dori_Rory]

keep the spoiler on! suits the car to the ground. Great work all round !

[Paudie.P]

love dis 180, nicest one ive seen :) keep the spoiler on tho

[seanie R.33]

Sound lads,random pic i have on the phone

http://i1180.photobucket.com/albums/x411/SeanieR33/DSC02299.jpg

[rob_180sx]

looks epic seanie!!

[tommiii]

serious looking 180

[seanie R.33]

Lost a bit of interest in the car the last whilebut after not driving it for a month now i cant wait to get back into it.Picking up a few more bits for it again wanna have it on road again for mid april.

Picked up a hks gtrs of bwRiley,not sure of turbine housing how can u check dont see any badge on it

http://i1180.photobucket.com/albums/x411/SeanieR33/20130224_224045_zps79bda4d7.jpg

550 injectors
http://i1180.photobucket.com/albums/x411/SeanieR33/20130224_224142_zps39862816.jpg

Z32 afm
http://i1180.photobucket.com/albums/x411/SeanieR33/20130224_224131_zps5c1c4323.jpg

pics of the 180 feeling sorry for itself

http://i1180.photobucket.com/albums/x411/SeanieR33/20130224_120602_zpsb692115c.jpg

http://i1180.photobucket.com/albums/x411/SeanieR33/20130224_092908_zps290506f4.jpg

[nikkisixx69]

that turbo is either a hks gt2530 or gt2540 , i have a gt2540 on my s15

last pic is pure sex! cant wait to see it at the di stand :D

[seanie R.33]

Thanks nikki will get that sent today!

Anyone else confirm that this is not a gtrs,was told it was :(

[Driftma]

It'll say what it is on the metal tag on the core

[seanie R.33]

Seems to have fallen off gave a good look for it last night.

[driftescort]

GTRS usually has (and just about the only turbo I have ever seen it with) a plate on the compressor housing saying 'GTRS'

Like so:

http://www.ipixel.com.au/sillbeer/images/hks-gt-rs/sr20-hks-gt-rs1.jpg

[seanie R.33]

Mine hasnt that anyway il get all the codes stamped on it later but there doesnt seem to be much on it

[driftescort]

It will be hard to identify if the tag that is supposed to be on the core is gone.

[seanie R.33]

Just lookin at picturs there think nicky is spot on about it being a gt2530

[driftescort]

Possibly yeah, that would be a bit smaller than a GTRS.

[seanie R.33]

Ya its not what im after,just have to give it back i also think them injectors could be out of a s15?

[driftescort]

Yeah I think they might be actually.

[seanie R.33]

Thought the same,not a bad days shopping so!:( just have to to hand em back,thanks for the help billy!

[Driftma]

As billy said if the tag on the core is gone your at nothing, but if it is a gt-rs it should have that small on on the compressed housing and even if that's fallen off the 2 holes for the rivets will still be there

[Driftma]

And I have some 550's if your looking for some

[nikkisixx69]

If its a gt2540 its capable of 400bhp no problem, but I find mine to be pretty laggy, although that could have to do with how the boost controller and map is set up which I haven't touched yet. There is slight visual differences between the gt2530 and gt2540 on tje housing.

Injectors look to be s15 :/

[seanie R.33]

Ya there not there as was having a good look around it last night,oh well back on the search for a new turbo

[seanie R.33]

Ya nick there s15 alright still think il hand back the turbo even if it is a gt2540 and stick with a gtrs,to be fair its not bwRileys fault as he was only goin by spec he was givin and only owned car a hour before he gave me the parts

[jdmjimmy]

SARD 550cc injectors ?
http://i29.photobucket.com/albums/c256/Xorcist666/fuelrail.jpg

[nikkisixx69]

Take an Injector off the rail and get some pics including code. If it says denso on it then its a sard 550cc injector!

[nick180sx]

just throwing it out there but would you not be better off getting a new garret 2871r as they can be got reasonable enough new and at least with a new turbo ya know what you have.The .64 exhaust housing is a savage bit of kit as you will find a gtrs laggy enough and your just paying for the hks badge

Ohh and car looks flawless,credit to ya

[rico180]

http://www.genis-x.com/index.php?k=Automotive&id=493517
All Nissan Side feed injectors are high impedence

The GTIR 444cc injectors are low impedence

91-99 USDM SR20DE = 259 cc side feed
00-02 USDM SR20DE RR = top feed

U12, U13, W10 and W11 SR20DET = 370 cc side feed
Pulsar GTIR SR20DET = 444 cc top feed

S13 and S14 RWD SR20DET =370 cc side feed
S15 RWD SR20DET = 444 cc side feed

SR20VET = 444cc top feed
SR20VE 20V = 350cc top feed

Side Feed Injectors

23 cc = 16 WHP
46 cc = 31 WHP
93 cc = 63 WHP
139 cc = 94 WHP
185 cc = 125 WHP * Pink GA16
231 cc = 156 WHP
259 cc = 175 WHP * Red SR20DE
278 cc = 187 WHP
324 cc = 218 WHP
333 cc = 226 WHP * Grey SR20VE
---------------------------------------------333 cc @ 4 bar = 261 WHP
370 cc = 250 WHP * Purple SR20DET
---------------------------------------------370 cc @ 4 bar = 290 WHP
416 cc = 281 WHP
444 cc = 299 WHP * Brick Brown SR20DET ( S15 )
---------------------------------------------444 cc @ 4 bar = 345 WHP
462 cc = 312 WHP
509 cc = 342 WHP
555 cc = 373 WHP * Yellow
---------------------------------------------555 cc @ 4 bar = 423 WHP
601 cc = 405 WHP * Yellow Tomei
---------------------------------------------601 cc @ 4 bar = 457 WHP
647 cc = 436 WHP
692 cc = 468 WHP
740 cc = 500 WHP * Red
---------------------------------------------740 cc @ 4 bar = 580 WHP
850 cc = 570 WHP SARD
---------------------------------------------850 cc @ 4 bar = 660 WHP

Nissan Top Feed Injectors

350cc = 275 WHP * Green SR20VE 20V P12
444cc = 299 WHP * Yellow RNN14 GTIR
444cc = 299 WHP * Yellow SR20VET

I got this from another forum .

[driftescort]

just throwing it out there but would you not be better off getting a new garret 2871r as they can be got reasonable enough new and at least with a new turbo ya know what you have.The .64 exhaust housing is a savage bit of kit as you will find a gtrs laggy enough and your just paying for the hks badge

Ohh and car looks flawless,credit to ya

GTRS is basically exactly the same as .64 2871R.

[Driftma]

Take an Injector off the rail and get some pics including code. If it says denso on it then its a sard 550cc injector!

judging by the pic there deffo not sard injectors anyway.
this is what sards look like
http://www.more-japan.com/files/d_982.jpg

[Driftma]

GTRS is basically exactly the same as .64 2871R.

i'm fairly sure a gtrs is nearer to a 2871r .86, i could be wrong tho

[nick180sx]

i'm fairly sure a gtrs is nearer to a 2871r .86, i could be wrong tho

yeah the gtrs is a laggy turbo for its size,better off with a .64 2871r

[driftescort]

i'm fairly sure a gtrs is nearer to a 2871r .86, i could be wrong tho

I don't think so lad, they pull very similar figures on the dyno. Almost 100% they are the same as a .64 except that the GTRS has the wastegate hole already ported.

[seanie R.33]

Finially picked up a fairly fresh gtrs,should have few more bits soon!!

http://i1180.photobucket.com/albums/x411/SeanieR33/20130314_225907_zps0163b412.jpg

[D.Daly]

Hooray for the gtrs!!:D

[seanie R.33]

Ha ha long time comming alright.

[seanie R.33]

326 power wing looking the businss!!

http://i1180.photobucket.com/albums/x411/SeanieR33/IMG_20130316_151755_zps59d488e3.jpg

[nikkisixx69]

fuck yeah!!!

[niall s14a]

Pullin out all the stops for the 21st of April?? Haha. Looks awesome

[JDMfrank]

Spoiler will look epic. :cool:

[Darenm]

The wing would look better red imo :p

[PeterT]

aaaaaaah wtf where did you get thatttttttttt

[mayo s14]

fuck that is goin ta look unreal ..

[Danjordan]

The spoiler looks the business!!

[rob_180sx]

thats the fuckin job!! sweeet!!!

[seanie R.33]

Thanks lads really happy with the power wing,just a vented bonnet and a roof spoiler and that will be the outside finished.

Picked up a blitz boost controller off a buddy last night,just need to pick up 550's and a clutch and she'l be going for mapping

http://i1180.photobucket.com/albums/x411/SeanieR33/20130317_105702_zps0a13d12b.jpg

[haydomiata]

those injectors that reilly has are actually 550s i googled them yday there nismo 550s before nismos wer yellow they wer pink in colour a guy on sxoc had a set and was fining out what they wer got them flow tested to find out and they wer putting out 600cc at 3 bar which is what a set of 550s will do

[haydomiata]

http://www.sxoc.com/vbb/showthread.php?467645-Pink-injectors-what-size
theres the link

[seanie R.33]

Perfect il get onto him so

[seanie R.33]

Exedy 3 puk clutch came today
http://i1180.photobucket.com/albums/x411/SeanieR33/20130322_170937_zps9dc50fd5.jpg

Parts are gathering now now,just must collect a decat and should have it maped soon enough
Whats to be fitted is

Exedy clutch
550's
Hks gtrs
Z32
Boot controller

http://i1180.photobucket.com/albums/x411/SeanieR33/20130322_171214_zps221bcd8e.jpg

[haydomiata]

Does the missus not freak for Gavin a turbo on the bed haha fair play lad getting a bits go to match the show

[seanie R.33]

Spare room so not too bad,if she knew how much it all cost tho im sure she wouldnt be impreased!

[seanie R.33]

326 power wing fitted!

http://i1180.photobucket.com/albums/x411/SeanieR33/image-1366649376784-V-1_zps2b38e697.jpg

http://i1180.photobucket.com/albums/x411/SeanieR33/IMG_20130423_082529_zps1b0e6eda.jpg

http://i1180.photobucket.com/albums/x411/SeanieR33/936376_171576389668236_1260723343_n_zpscf2d6511.jp g

[willie 180sx]

stunning car lad,just gets better and better!!!

[ejf86]

seen this for first time in person last weekend it fuckin savage

[paulshox]

savage lookin yoke man fair play!

[haydn itr]

car has so much more presence in real life than pics nice work man its insane

[Traumtänzer]

Mmmh, I love Exedy clutches ;)
PM'ed you.

[seanie R.33]

well here's the last update on this for a while as i've lost all interest in having this on the road.I'm either going to sell this or put in away for a few months in the shed.After all that time gathering bits for it i've sold the gtrs and the injectors to fund a track car project as i said there was no use have the gtrs lying in the shed un-used for a for any longer.
http://i1180.photobucket.com/albums/x411/SeanieR33/IMG_20130524_212844_zpse61f3b0b.jpg (http://s1180.photobucket.com/user/SeanieR33/media/IMG_20130524_212844_zpse61f3b0b.jpg.html)
http://i1180.photobucket.com/albums/x411/SeanieR33/IMG_8881-Edit_zps573c9991.jpg (http://s1180.photobucket.com/user/SeanieR33/media/IMG_8881-Edit_zps573c9991.jpg.html)
http://i1180.photobucket.com/albums/x411/SeanieR33/image-1369603398013-V_zps11a69d55.jpg (http://s1180.photobucket.com/user/SeanieR33/media/image-1369603398013-V_zps11a69d55.jpg.html)

[Damien]

Unless your stuck for money id store it till the love for it comes back, you'll find it hard to replace and prob regret it in a while.

I'm currently in the same position with my 14, drive it once a week and really don't get much fun from it, but I'm sure I'd regret it if I sold it. I've thought about a track car but for the use I'd get from it it's a lot of money to have tied up, when I also need a trailer and something to tow it.

[seanie R.33]

Finally getting a bit more interest in this again its been neglecated the last few months,gonna change this up a bit over the comming months and add a few suspension parts such as camber arms,toe arms to sort out the rear camber.new coilovers is on the list aswell as a new bride as I sold my brix.first part of the project revival is something ive been looking for since I started the car from day one but was well worth the wait

Dmax vented bonnet
http://i1180.photobucket.com/albums/x411/SeanieR33/20130919_181725_zpsb98691d4.jpg

was like a child at christmass unwraping this it will be painted red and not going to use aerocathes or anything as wanna keep the car as sleek as possie :cool: open to suggestions on any other bits to be added to the look of the car bit dont think I wanna do much more,maybe a set 2" shotguns??

[ciaran.canney]

Best of luck wit build lad, I have a lot of sr20 parts there if u want just give me a message, engine parts aren't back yet cheers

[grange]

shotguns and then sell the car 2 me :)

[seanie R.33]

Ha no thanks grange you sbould concentrate on finishing your own car ha

picture that poped up on autolifers

http://i1180.photobucket.com/albums/x411/SeanieR33/Autolifers-180sx-240-sx-200sx-rps13-s13-red-kouki-drift-drifting-idc-cezeli_zps60ae30cb.jpg

[derek89]

The dmax bonnet will look class on in seanie....looking at this is really making me to get the finger out and actually work on mine ha.

[nikkisixx69]

the bonnet was the missing piece to the puzzle! gonna complete it dude!! but id personally spray it red, or if your pure fancy a very light coat of red so you can see the carbon weave through the paint like on ferrari f40's haha

2 inch shot gun pipes will look terrible. my trust exhaust had 3.5 inch pipes if you wanna look at that for reference

[Darenm]

d-max bonnet is going to look the tits on it dude
As for shotgun pipes big yes but 2" will look lost I'm going with twin 4" on mine Cos personally 3" is just that bit to small aswell

[seanie R.33]

@nikkki ya bonnet will be going red alright dont know about the light coat tho ha

@darren u were always a man for a big pipe,will have yo do bit research,twin 4" pipes sounds huge!

[subzero]

Car was crying out for that bonnet :) ... personally id leave it unpainted, or at least for a while to see if you like it.

[seanie R.33]

@subzero ya I knew myself car was crying out for that bonnet but i wasnt exactly tripin over dmax bonnets in the shed,so glad I have one now.gonna put it on un-painted but was never a fan of un-matching bonnets.

[JohnRaff]

what you said will more or less make the car perfect, dmax bonnet, paint it... shotguns then its more or less perfect...
Car is a credit to ya lad.

The only other thing i would do is change the wheels... they are amazing, they look great on it but after japfest and there are alot of people reversing there wack offset 8j sp1s they are everywhere in the country ha... i think im gonna get rid of mine now ha...
You have the best set i have ever seen in person and you would have no problem selling them ha... i would love to see this car on a set of aggressive rpf01s or tasty te37s or xd7s!
Please dont pick me up wrong, the car looks class, its just me dreaming!
Keep up the awesome work :)

[seanie R.33]

@ john raff ya I see lots of sp1's now alright and did think about changing them but dont think i could bring myself to sell em,dont think I go concave wheals would have to have bit dish for the car thought about a mental set wed kranze alright


http://i1180.photobucket.com/albums/x411/SeanieR33/1253-640x358_zpsd43203fa.jpg