PS13 K'S Project [Archive]

jdmjimmy

15-07-12, 18:59

After selling this ps13 12 months ago nearly to the day I regretted it..
So with a lengthy wait Pedro finally gave in an sold it back to me :D.

It's an original K's aero with electric sunroof :afro: shell itself is rust free has had some bangs but not gone beyond repair ..

The plan is try and source paperwork if anyone has any info I would appreciate it..If that fails there will be a back up plan ..

full engine rebuild by richard bradley
s15 turbo with hks acquator
Baffled sump (looks like Greddy)
front mount intercooler
blitz air filter
tubular mani
downpipe
straight pipe from turbo back

zeal coilovers
cusco strut brace front and back
full custom cage

turbo timer
fixed back drivers seat and harness
white pimp wheel with boss kit
huge old skool greedy boost gauge

extra lock
new tripple plate xtd clutch
cusco two way diff (seriously aggresive)
short shifter
5 stud conversion

(spec update)

Engine

Power enterprise pe1420 Turbo
Good quality 4 branch mani
Metal gasket
Tomei Pon cams
Nismo 550's
Z32 AFM
GTR FMIC
GTR Fuel pump
Trust Thremostatic oil cooler & filter relocator
stainless downpipe and full straight through
Yashio copper rad

Suspension & Drive

Zeal Coilovers
cusco braces Front and rear
5 stud Hubs
Upgraded clutch
2way Diff

Exterior

Nissan plastic aero bumper
Circuit sports headlights
FRP Bonnet
Rolled Front fenders
50mm origin rear fenders
OEM skirts
Red/clear rear tails
Dmax roof and boot spoilers

Interior

Full cage
Bride Zeta Red
Bride Brix
Defi Gauges
Greddy Boost controller

Home bound from Sligo

http://i178.photobucket.com/albums/w244/AE86JIMMY/402820_409914932379613_1346174725_n.jpg

How it looked when I had it last

http://i178.photobucket.com/albums/w244/AE86JIMMY/21072011670.jpg

http://i178.photobucket.com/albums/w244/AE86JIMMY/21072011671.jpg

Plans..

So far plans are repair damage
Full re-spray inside and out
some power parts for the engine
try sort logbook/paperwork

I have some parts gathered for it already :o

Frp oem look bonnet ( I might vent it )

Got some good condition steel wings

Found some mint chuki skirts at home

got a pair of Brick headlamps (originals were sold)

selection of Bride seats undicded may go Red fixed backs or Brix Gradation

As for Wheels I think im going to have to buy some 17" concave TE37's or use Juice's old Grenades painted bronze.

seanie R.33

15-07-12, 19:03

That's the job good yo see a car being brought back to life instead of being broke!

K series steve

15-07-12, 19:04

please make it look like that again!:)

juice

15-07-12, 19:10

Hmmmm Grenades in bronze would be tasty

jdmjimmy

15-07-12, 19:11

There's enough S bodies wrecked and broke at this stage sickening to think cars like the Candy red BN sports 180sx were brought to this country and destroyed! so I think some of them deserve to be touched up and given another chance.

@K series steve it will be better ! :D

jdmjimmy

11-09-12, 22:18

So havent been upto much with this but quickly banged some panels and stuff onto it along with the 17" SSR SP1's

Have pretty decent plans for it Origin type 2 rear fenders due to the lh 1/4 being unrepairable

full aero kit including rear ps13 spats have a load of straight panels to put on and then just a respray inside and out turn it back into a road car and maybe drift aswel

Wish me luck haha

some pics

http://i178.photobucket.com/albums/w244/AE86JIMMY/110920121095.jpg

http://i178.photobucket.com/albums/w244/AE86JIMMY/110920121091.jpg

http://i178.photobucket.com/albums/w244/AE86JIMMY/110920121097.jpg

http://i178.photobucket.com/albums/w244/AE86JIMMY/110920121100.jpg

http://i178.photobucket.com/albums/w244/AE86JIMMY/110920121096.jpg

shea

11-09-12, 22:30

car looks unreal as is, all the best with it

Steve K

11-09-12, 23:06

What colour you thinking of spraying it?.. Your plans sound good. Should be savage when it's done

Chris-Hachiroku

11-09-12, 23:09

Looks cool the way it is!!!!

peterhouze

11-09-12, 23:11

ah fuck now bouncing my head against a wall why the fuck did i sell it and drink all the money

jdmjimmy

11-09-12, 23:21

What colour you thinking of spraying it?.. Your plans sound good. Should be savage when it's done

dunno what colour yet would like an off-white cream or maybe 2 tone open to suggestions??

cheers for the comments :afro:

pedro thankyou for the car lad :cool:

Steve K

12-09-12, 00:31

Theres not enough two tone ps13's in this country!

http://86fighters.files.wordpress.com/2010/05/picture-11.jpg?w=655

Steve K

12-09-12, 00:35

One more here

http://infinitefocusphoto.files.wordpress.com/2012/05/infinitefocus-4263.jpg

Two tone is the route I'd be goin away if I was in your shoes :)

Smokey Bear

12-09-12, 01:12

Theres not enough two tone ps13's in this country!

http://86fighters.files.wordpress.com/2010/05/picture-11.jpg?w=655

Agree 110%, can't understand why lads take good two tone ones and bang massive kits on them. I'd understand if it was because a yoke was wrote off.

I hope you go down the two tone route slammed with nice wheels. Good luck with it!

driftescort

12-09-12, 11:09

I can defientely see the potential here.

Two-Tone like Nigel Petrie's PS would be badass.

decobyrne106

12-09-12, 11:46

two tone, concaved wheels, low and subtle touches under the bonnet that are visible from outside (painted engine bay) thing would be animal looking as a road car!

nicky h

12-09-12, 12:28

There's enough S bodies wrecked and broke at this stage sickening to think cars like the Candy red BN sports 180sx were brought to this country and destroyed! :D

That Car is far from destroyed looks abit different now but she's nearly finished !:cool:

Dylan

12-09-12, 12:41

That Car is far from destroyed looks abit different now but she's nearly finished !:cool:

:wink:

jdmjimmy

12-09-12, 13:05

That Car is far from destroyed looks abit different now but she's nearly finished !:cool:

Good to hear but unfortunately it wasnt left exactly as it was when built in Japan took some thick paddy to rip it apart and leave someone else with the job of rebuilding it hope you go with a BN kit and the same colour scheme

RB26DETT

12-09-12, 13:25

2-Tone would be different and would look :cool:

Best of look with it. :)

seanie R.33

12-09-12, 17:12

Two tone would be cool but a red ps on miesters is a mouth watering!

TwinCamLad

12-09-12, 22:25

Dunno how nobody has spotted the camper in the ome of the pictures jimmy! :P

peterhouze

12-09-12, 22:36

Dunno how nobody has spotted the camper in the ome of the pictures jimmy! :P

some camper i tell ya

TwinCamLad

12-09-12, 22:56

some camper i tell ya
It is that indeed man

Simon

13-09-12, 16:20

keeewl, i second two tone man.. looks soo good.

peterhouze

14-09-12, 01:51

http://www.facebook.com/media/set/?set=a.192143134141826.39597.170733076282832&type=1
il just leave that link there for ya

lorkie

16-09-12, 18:41

was this car left lyin in coolaney for a while???

jdmjimmy

08-11-12, 22:09

long time no update

So was on the lookout for a TD06 or similar after availability / Prices scared me off this came up

http://i178.photobucket.com/albums/w244/AE86JIMMY/sr20.png

arrived nicely snug fitted on a pallet

http://i178.photobucket.com/albums/w244/AE86JIMMY/sr201.jpg

This came out of a ps13 from Japan suspected melted piston (blowing oil out the dipstick),Wont know for sure until I strip it

Schhhpec

Power Enterprise / IHI pe1420 Turbo
braided oil and coolant lines
4 branch & Downpipe
Tomei pon cams 2525lb is stamped on them
nismo 550cc injectors
s15 pistons

Got the ECU to go with it aswel (revs out to 9200:confused: ) but will probably go nistune / power fc to be safe

So will either replace the fucked piston or swap the bittom end depending if a ring broke up and scored the cylinder or not either way should be a healthy responsive engine Basically the same set up as Risky devil 180sx :afro:

http://www.180sx.co.uk/community/pedestal/risky-devil-180sx/

Also have

Orc 409 series clutch
Nismo 2 way GT pro LSD
Cusco adjustable anti roll bars
nice medium sized Greedy fmic

tamtaf

08-11-12, 23:04

jdmjimmy

08-11-12, 23:11

Jimmy dont change the ecu mate its awesome whatever the wee japs did with it! Ran 360+ bhp, and hits like Mike Tyson back in the day, I'd at least run it with that ecu.............. ya mite like it. Good to see it arrived safely :-), if ya are going pfc or nistune keep that ecu and put nistune into another standard brain, will be hard to get a map as good.

Cheers lad yea wel I will run it on that first to see what its like and get martin Tracey to put it on the rollers and see if shes running lean or wat ..

Stewart gilmour incar nutts corner, drifting - YouTube (http://www.youtube.com/watch?v=glD6EfB6x3w) sounds well in this vid

mikes131jz

08-11-12, 23:20

good luck wit the build man!!! buildin my own ps rd car must put up pics of the build aswel!!

tamtaf

08-11-12, 23:37

it doesnt run lean lad, stuart had an off an a cone hit the fuel tank and damaged it must have caused fuel starvation, a swirl pot prob would ave saved it and the engine would still be running strong. Well that's our take on things after seeing damage to the tank and baffles when it was removed from the car. steven had that on the rollers ran faultlessly, hope she goes just as well for you :-)

peterhouze

04-12-12, 07:00

any updates on this man
i want it fucking back

jdmjimmy

28-12-12, 22:13

Trying to undo the Irish botchery this poor car has got is sickening !

knocked 1 INCH of filler out the quarter panel and spent 3 hours of beating pulling and jacking!

The tail light now fits nice I could fit my hand behind it at the start! would still like to find a 1/4 as I have no lines in mine from previous (panel beaters)

tommiii

28-12-12, 22:42

best of look with the build man

jdmjimmy

22-01-13, 01:20

After failing miserably to find a decent 1/4 took into some repair work all the lines need to be reformed and alot of finishing this is where its at in some spots the was 1 inch of filler and I could put my hand behind the light ! sweet so with minimal body work skills went at it looking good so far..

http://i178.photobucket.com/albums/w244/AE86JIMMY/210120131136_zps2588b142.jpg

http://i178.photobucket.com/albums/w244/AE86JIMMY/210120131135_zps0b04e285.jpg

hunty_sideways

22-01-13, 02:30

Who tried to do the cage and 1/4 ??

jdmjimmy

22-01-13, 09:54

I dont know man cage is close to the roof and has gusets but the bars are like match sticks!

mattybyrne2008

23-01-13, 00:18

Thing was going very well with an s15 last drift day I was at before Christmas oh and an ae86 was very good to watch

seanyboy s14

23-01-13, 13:47

She's starting to look well now .I want a ps13 so bad :(

thetangerine

23-01-13, 18:18

Fair play pal,that filler must have bin a killer to c. Best of luck

Prodrifter86

23-01-13, 18:46

sweet thank god some1 took it back of Peter hahaha before it got roofed! :P only kidding Pedro! ha actually great work dude. nice to see your back at it again

peterhouze

23-01-13, 19:06

sweet thank god some1 took it back of Peter hahaha before it got roofed! :P only kidding Pedro! ha actually great work dude. nice to see your back at it again

hahahahah the chickens miss the yoke i have to say
nice work jimmy might call up to ya one of the weekends

Prodrifter86

24-01-13, 02:57

hahahahah the chickens miss the yoke i have to say
nice work jimmy might call up to ya one of the weekends

at least the chickens lived in a bit style so man! haha:afro:

jdmjimmy

29-01-13, 01:04

nikkisixx69

29-01-13, 01:13

one last attempt tomorrow evening throw a skim of filler at it and if that doesnt work out then il have to go with over fenders 1/4 is buckled into shite and no original lines exist below the tail light so its hard to judge see how it goes. Anybody know where to get origin type II fenders waiting 3 months for word off drift 2 not even a delivery date!

i dont think there is any origin stuff coming in for a while dude!! type 2 overfenders were ment to come in with his last massive origin order, but they never put them in the container!

would you not send it to a panel beater dude??

jdmjimmy

29-01-13, 01:22

ah that explains it.. Ah sure they cant work magic either lol Id be ran and told to get a quarter its fairly good atm but overfenders would be alot easier ha.

jdmjimmy

17-03-13, 11:42

So been tipping away at this past while not making much headway but not in any rush

accomplished a few things the past few weeks & Bought a few things

Engine stand,compressor,TE37's Origin Press line fenders tools etc etc..started welding cutting and getting a bit out of my comfort zone all learning I suppose with the attitude of it must be done.

some pics of whats going on and how plans have changed and gone with fenders rather than trying to make a 1/4 panel.

http://i178.photobucket.com/albums/w244/AE86JIMMY/160320131216_zpse43e7c96.jpg

Quick one of the new stand going to use the cams turbo injectors etc off this engine then rebuild it as a spare.

http://i178.photobucket.com/albums/w244/AE86JIMMY/060320131188_zps93a37262.jpg

Some new wheels 17x9 et15 Te37's

http://i178.photobucket.com/albums/w244/AE86JIMMY/130320131197_zpsdffdbb9f.jpg

Fenders arrived from Japan Genuine Origin was trying to get them through Drift2 since November 2012 so that was a slight piss take when I got them from Japan in 2 weeks for less cost!

http://i178.photobucket.com/albums/w244/AE86JIMMY/160320131200_zps7deb07d0.jpg

quick mock up

http://i178.photobucket.com/albums/w244/AE86JIMMY/160320131209_zpsbf1bcd96.jpg

checked out how 326 would look with stoock kit and fenders undecided

http://i178.photobucket.com/albums/w244/AE86JIMMY/160320131213_zps62b2a0d0.jpg

Gave this craic a go all welded up now nothing too stressful just a bit iffy taking the grinder to the quarter

Thats about it for now ordered rivnut to do secure the quarters and have to weld on a strip of sheet between the quarter and overfender.

S13..KEV

17-03-13, 11:57

some work going on there dude.cant wait to see it finished

PS13 FOR LIFE :wink:

patt

17-03-13, 12:52

good going mate

juice

17-03-13, 13:17

Looks great with std kit and the wing, maybe different lights

Dave

17-03-13, 13:42

Those overfenders are spot on! Hate big 50mm bubby fenders on Silvias! Going to look awesome when done!

jdmjimmy

17-03-13, 17:23

Thinkin of going black or red with black roof

http://i107.photobucket.com/albums/m295/elmo45_2006/Coupe%20Love/DSC08176.jpg

http://i107.photobucket.com/albums/m295/elmo45_2006/Coupe%20Love/IMG_0163.jpg

grange

18-03-13, 15:31

Looks cool as fuck. What size are your rear meisters again?

jdmjimmy

18-03-13, 17:51

There Professors on the s13 Meisters are on the Chaser

Meisters 18x10.5 et24 low disk

Professors 17x10 et0

ian g sr20

18-03-13, 20:03

Looks savage now.
Wat site ja get the fenders from

jdmjimmy

18-03-13, 20:27

Got them through a lad in Japan pm me if ya want a set

nikkisixx69

18-03-13, 20:28

Got them through a lad in Japan pm me if ya want a set

jesse streeter, whats the big secret lol??

veedubmk4

18-03-13, 20:28

serious lot of work going on there and that camper in the back looks like it has a lot of potential too:afro:

TwinCamLad

24-03-13, 12:44

Cant wait to see this finished, hope its done before i head off haha

jdmjimmy

30-06-13, 13:15

So All rubbed down primed,repaired bumper,bonnet,bootlid

http://i178.photobucket.com/albums/w244/AE86JIMMY/DSCF0882_zps46bc9cd6.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/DSCF0882_zps46bc9cd6.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/DSCF0874_zpsafa5fd04.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/DSCF0874_zpsafa5fd04.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/DSCF0896_zpsc1859952.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/DSCF0896_zpsc1859952.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/DSCF0885_zps7a1d6f38.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/DSCF0885_zps7a1d6f38.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/DSCF0887_zps90764b16.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/DSCF0887_zps90764b16.jpg.html)

Painted the roof,doorjams and in around bootlid turned out ok second time round its black and shiney . Then of course disaster as always compressor decides to pack up when doing the wet top coat on the doors and quarters so works at a stand still! Wonderful!

In better news got my TE37's repaired wheel doctor done a serious job turning a pair of decent TE's into a full set of 6 17x9 et12 or 15 unsure.

http://i178.photobucket.com/albums/w244/AE86JIMMY/DSCF0892_zps458b13c0.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/DSCF0892_zps458b13c0.jpg.html)

This was one wheel before will get pics up later but its good as perfect now

http://i17.photobucket.com/albums/b85/Rich1275/IMG_1157.jpg

paddyb01

30-06-13, 13:30

fuck he did some job on them:eek:

Greg

30-06-13, 14:00

Jesus, some difference in the wheels.

decobyrne106

30-06-13, 18:22

shell looks good now nice update.

p.s if the mini is for sale contact me :p

Darenm

30-06-13, 18:56

Holy fuck some difference in the wheel

Savage work jimmy keep it up

jdmjimmy

02-07-13, 21:13

getting there tried on a TE37

http://i178.photobucket.com/albums/w244/AE86JIMMY/020720131300_zps13d6cbaa.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/020720131300_zps13d6cbaa.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/020720131299_zps36ec9085.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/020720131299_zps36ec9085.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/020720131304_zpsf822a45e.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/020720131304_zpsf822a45e.jpg.html)

seanie R.33

02-07-13, 21:15

They look sweet jimmy!

grange

02-07-13, 21:22

yes they do look fecking good!

rico180

03-07-13, 02:18

fuck thats some job on the te37, looking well jimmy.

cooks86

03-07-13, 08:30

Wheel doc dose savage work only lives over road from me if anyone ever wants wheels picked up dropped off. Is this goin to be track or road jimmy

jdmjimmy

03-07-13, 09:05

Its going to be a road worthy track car I think ha will see how it goes

gouchie

10-07-13, 19:42

Fair play jimbo she starting to come together nice

jdmjimmy

10-07-13, 23:58

some sunny updates pulled it out to get a look at my first attempt of painting nothing over impressive but its much better than before and cost around €250 so no complaints.

bonnet and wings are not painted alot of trims and stuff to go back on still looking for vented wings

http://i178.photobucket.com/albums/w244/AE86JIMMY/DSCF0921_zpsc0e2ca97.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/DSCF0921_zpsc0e2ca97.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/DSCF0925_zpscc86e8b3.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/DSCF0925_zpscc86e8b3.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/DSCF0920_zpsec2088cc.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/DSCF0920_zpsec2088cc.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/DSCF0924_zps21753422.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/DSCF0924_zps21753422.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/DSCF0915_zps3e5356c5.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/DSCF0915_zps3e5356c5.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/DSCF0907_zps4c654362.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/DSCF0907_zps4c654362.jpg.html)

Still cant decide 326 or roof and boot dmax . Leaning towards Dmax seeing as 326's seem to be alot more popular lately

http://i178.photobucket.com/albums/w244/AE86JIMMY/DSCF0927_zps1edf70e6.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/DSCF0927_zps1edf70e6.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/DSCF0934_zps07b26168.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/DSCF0934_zps07b26168.jpg.html)

peterhouze

11-07-13, 00:03

i want it back right now

decobyrne106

11-07-13, 02:13

looks fuckin gangster! you could probably save the paint with a light wet sanding with 2000+ wet and dry and a good buffing! might change it a litter not much

seanie R.33

11-07-13, 07:55

Looks well jimmy

JohnRaff

11-07-13, 08:58

Looks savage man!

nikkisixx69

11-07-13, 10:42

looks fuckin gangster! you could probably save the paint with a light wet sanding with 2000+ wet and dry and a good buffing! might change it a litter not much

yeah paint should buff up great doing that! look awesome jimmy, perfect styling!

mattybyrne2008

11-07-13, 15:42

I'd rather the 326 havnt seen many using them on track cars anyway

Damien

11-07-13, 16:32

Looks well.

The paint is probably all orange peel going by those pics. A good wet sanding and a proper polish should finish it off to a flat surface to give a good shine.

Darenm

11-07-13, 17:21

Looking awesome jimmy can't wait to see it finished
I'd go D-Max if I were u way to many 326wings about lately

jdmjimmy

24-07-13, 22:55

bit of a go slow at the moment how and ever
550's and pon cams installed

http://i178.photobucket.com/albums/w244/AE86JIMMY/DSCF0938_zpse09e8283.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/DSCF0938_zpse09e8283.jpg.html)

put on an original red rocker cover aswel looks better imo

http://i178.photobucket.com/albums/w244/AE86JIMMY/DSCF0943_zpsfce2b82d.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/DSCF0943_zpsfce2b82d.jpg.html)

other than that just general trim fitting and boaring stuff at the moment hopefully get at it to put on the power enterprise turbo on Sat

jdmjimmy

31-08-13, 09:55

Turbo time

just installed the blower on this thing

IHI power enterprise pe1420,4 branch ,braided lines & downpipe

http://i178.photobucket.com/albums/w244/AE86JIMMY/IMG_20130828_230731_zpsfa271576.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/IMG_20130828_230731_zpsfa271576.jpg.html)

Getting closer all the time cant wait to drive it its been a long time in the making

JohnRaff

31-08-13, 09:58

Going to be a sweet car! good work man

jdmjimmy

31-08-13, 10:05

http://i178.photobucket.com/albums/w244/AE86JIMMY/20130824_145717_zps3ee98674.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20130824_145717_zps3ee98674.jpg.html)

grange

01-09-13, 13:59

Sweet turbo ;)

jdmjimmy

12-09-13, 22:38

Gettin in nicely now with it

Tried on a TE37 .

Had to do some plastic welding & bracket making to get the headlights in some wiring aswel put on the spare black wings I had for now until some frp ones come up cheapo.

http://i178.photobucket.com/albums/w244/AE86JIMMY/20130912_185735_zps838416c8.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20130912_185735_zps838416c8.jpg.html)

Chipped ecu vs stock you can see the extra board and 2 eproms soldered on to go with pon cams,z32,turbo,fmic etc came off the other engine
should be ok on octane boost if not il get a power fc or nistune

http://i178.photobucket.com/albums/w244/AE86JIMMY/20130912_192817_zps0a9ea082.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20130912_192817_zps0a9ea082.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/20130912_192935_zps323186ac.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20130912_192935_zps323186ac.jpg.html)

JohnRaff

13-09-13, 13:13

This car makes me wonder why i am ploughing money into a miata! I really love this car, you are making a great job of it man

jdmjimmy

13-09-13, 15:30

Cheers dude your ploughin money into a miata to end up like this! cool

http://cdn.speedhunters.com/wp-content/uploads/2011/05/IMG_0242_14q3_9.jpg

jdmjimmy

28-09-13, 19:25

Some new goodies also have my z32 afm on route.

Took her out for a wash today banged in all my panels wings are only cable tied on hence crookedness.

can finally see how its looking

http://i178.photobucket.com/albums/w244/AE86JIMMY/20130925_184242_zpsafc4c6a0.jpg

http://i178.photobucket.com/albums/w244/AE86JIMMY/20130928_172052_zps63cd6aef.jpg

http://i178.photobucket.com/albums/w244/AE86JIMMY/2013-09-28191256_zps2a2c1d49.png

http://i178.photobucket.com/albums/w244/AE86JIMMY/2013-09-28190516_zpsef366d71.png

fitzer

28-09-13, 20:10

epic :eek:

Keith_200SX

28-09-13, 20:15

Cars gorgeous, FairPlay mate!!

Darenm

28-09-13, 21:58

looking good jimmy :D get them te37s back under it ;)

adam 9

29-09-13, 11:24

Looks class .. What's the sizes on the wheels ?

grange

29-09-13, 13:38

looking good jimmy :D get them te37s back under it ;)

x2 agree the te37s look shit hot

jdmjimmy

03-10-13, 10:50

Looks class .. What's the sizes on the wheels ?

Cheers lad its something different anyway stock kit wide quarters and dishy wheels. Hopefully it doesn't catch on

jdmjimmy

03-10-13, 10:53

TE37'S are for the 180 lads

Got my z32 fitted need to give the bay a good cleaning out

http://i178.photobucket.com/albums/w244/AE86JIMMY/20131002_212024_zpsa36172ab.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20131002_212024_zpsa36172ab.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/20131002_185250_zpsfa07105e.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20131002_185250_zpsfa07105e.jpg.html)

shed shot new lights in . late nights ahead !http://i178.photobucket.com/albums/w244/AE86JIMMY/20130930_201515_zps6f28b530.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20130930_201515_zps6f28b530.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/20131009_204630_zpsd18dcafe.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20131009_204630_zpsd18dcafe.jpg.html)

Dave

03-10-13, 11:11

Looks unreal not a thing I would change about this! Wasn't sure about the origin overfenders but look spot on! Looking forward to seeing it finished!

adam 9

08-10-13, 22:08

looks really well, the te37's are the wheels id put on it.
im gonna put them on my own in bronze..

Administrator

08-10-13, 22:23

Looking swell Jimmy! Giving me a bit of inspiration to get my 180 sorted!

jeff nelson sileighty

08-10-13, 23:22

Looking swell Jimmy! Giving me a bit of inspiration to get my 180 sorted!

X2 on that in fairness jimmy its sexy ....its giving me a kick up the hole to get mine done too

jdmjimmy

09-10-13, 10:30

cheers lads glad to inspire ha.

Darragh call down one of the days !

@adam 9 . Took me about 3 years to get the 6 I have at a respectable price so id say il keep them. Will prob swap between TE's and Dish to suit the mood

topdog

10-10-13, 07:32

Really cool car dude. keep the updates coming!

jdmjimmy

09-11-13, 20:35

thanks for the comments lads.

got my exhaust finished today bonnet secured boot latch fitted and few other silly jobs

aaaaand finally..

Got it out for a test drive today after a number of minor incidents boost pipes blowing off etc I got to feel the power this thing is putting down .. definitely put a smile on my face just on .6 at the mo due to no boost controller feels 300 ish so 1 bar will be fun

Ghetto style awesome welds it makes noise and cost zero so im happy

http://i178.photobucket.com/albums/w244/AE86JIMMY/20131019_164823_zps5fcf7280.jpg

http://i178.photobucket.com/albums/w244/AE86JIMMY/2013-11-09204425_zps38b68ca1.png

http://i178.photobucket.com/albums/w244/AE86JIMMY/20131109_143806_zps473d0525.jpg

niall s14a

09-11-13, 20:50

Savage jimmy. Your sittin on a gold mine. Fair play

jdmjimmy

09-11-13, 21:05

Savage jimmy. Your sittin on a gold mine. Fair play

Haha cheers nial dunno bout the gold mine more like money pits

need to get shit sorted for mondello end of nov heres what I need if anyone wants to help out cash waiting

Breather Catch can
water temp sender adaptor for rad hose
235 45 or 245 40 17" tyres
boost controller
25mm nissan 5 stud spacers
And somebody wit a trailer to pull the car for diesel money and passo spins :-)

tweek

09-11-13, 21:27

I have a juran adaptor and sensor for the water temp,I also have 235/40 17s drop me a line if your interested 0851499995

angeredpolecat

09-11-13, 23:21

looks mint

jdmjimmy

09-11-13, 23:27

Far from mint .. But your 100 posts are goin well

Simon

10-11-13, 10:45

This is cool.... goood job

rhysmate

10-11-13, 11:19

so much win! i love these, you've a serious job made of it!

jdmjimmy

16-11-13, 22:20

Trying to keep the old di builds going small updates with hugely scatched nuckles

note to self never fit oil cooler again with engine in car

Anyway Greddy thermostatic cooler and filter relocater

http://i178.photobucket.com/albums/w244/AE86JIMMY/20131116_151015_zps2f506924.jpg

http://i178.photobucket.com/albums/w244/AE86JIMMY/20131116_151005_zps6ac0973e.jpg

ian g sr20

16-11-13, 22:23

Reli kool build must get myself a ps.
Keep up great work

jdmjimmy

24-11-13, 23:33

Went away for a few days so got no shed time this weekend but picked this baby up while away

http://i178.photobucket.com/albums/w244/AE86JIMMY/20131124_230727_zps222ba0af.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20131124_230727_zps222ba0af.jpg.html)

jamiem

25-11-13, 14:02

Really cool project, cant wait to see it finished, best of luck with the rest of it :)

jordy

25-11-13, 18:48

miiiiiiiiiint:o

jdmjimmy

22-12-13, 22:12

Happy xmas to me

http://i178.photobucket.com/albums/w244/AE86JIMMY/20131219_092641_zpsa3a72936.jpg

Still got a few bits to do really want to get this finished . Need a boost controller and fuel press reg has anyone got some

seanie R.33

22-12-13, 22:51

All your set's of defi's depresses me!

jdmjimmy

23-12-13, 15:05

lol seanie mans gota have defis.

jdmjimmy

01-01-14, 12:17

Tow wagon acquired! After looking at scrap over priced trailers and the hassle of getting a trailer licence and buying a jeep this idea made much more sense . Now just to get the car finished

http://i178.photobucket.com/albums/w244/AE86JIMMY/2013-12-31191326_zps6caf9d88.jpg

http://i178.photobucket.com/albums/w244/AE86JIMMY/20131231_120430_zps37326c48.jpg

Kruizer

01-01-14, 13:35

Cool bus...

adam 9

14-01-14, 01:03

how is she standing now?..

jdmjimmy

14-01-14, 20:54

Sittin on the TE37s chillin like a villon hitting track soon

jdmjimmy

22-01-14, 20:42

Saturday was a day of gauge fitting what a pain in the hole.

Started off with a not working oil temp defi so stripped it to try find the problem with no luck so I resorted to splitting an inlet pressure gauge and changing the setting at the back to work as a temp gauge then fitted the temp face and voilla she worked.

Some pics below

http://i178.photobucket.com/albums/w244/AE86JIMMY/20140118_132350_zps75f88179.jpg

http://i178.photobucket.com/albums/w244/AE86JIMMY/20140118_132341_zps7d024da9.jpg

http://i178.photobucket.com/albums/w244/AE86JIMMY/20140118_132309_zps295067e0.jpg

http://i178.photobucket.com/albums/w244/AE86JIMMY/20140119_171151_zps37b24bcf.jpg

jdmjimmy

23-01-14, 10:55

Package arrived this morning all the way from Japan

So keen to get these on been waiting so long to get to this stage of the build 1 or 2 days a week in the shed leaves progress very slow

http://i178.photobucket.com/albums/w244/AE86JIMMY/IMG-20140123-WA0002_zps241c8820.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/IMG-20140123-WA0002_zps241c8820.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/IMG-20140123-WA0004_zps3a1d6fb7.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/IMG-20140123-WA0004_zps3a1d6fb7.jpg.html)

Boost controller should be here monday aswel

http://i178.photobucket.com/albums/w244/AE86JIMMY/IMG-20140122-WA0047_zpsd6b6b9f2.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/IMG-20140122-WA0047_zpsd6b6b9f2.jpg.html)

jdmjimmy

23-01-14, 14:34

Just had to hit the garage at lunch for a test fit

http://i178.photobucket.com/albums/w244/AE86JIMMY/20140123_135056_zps0142a690.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20140123_135056_zps0142a690.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/20140123_134812_zps362dfabe.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20140123_134812_zps362dfabe.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/2014-01-23141616_zpse5250694.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/2014-01-23141616_zpse5250694.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/2014-01-23141707_zpsd4d3fc55.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/2014-01-23141707_zpsd4d3fc55.jpg.html)

Should get them painted and fitted saturday all going well

nikkisixx69

24-01-14, 01:00

aw hell yeah! still the 326 wing in this gives me a funny feeling in my pants!

adam 9

24-01-14, 13:35

Nice spoiler combination .. !! I got them for mine before Xmas there ..
You go for genuine dmax ?
1st proper pic of exhaust and I think it looks class !!

jdmjimmy

24-01-14, 21:15

Yea dmax, didnt know you had them aswel missed them in ur build been planning the aero kit and dmax wings since the begining nice to see it come towards the end have a few other cool bits to go on aswel

Boost controller fitted near ready for the rolling road more jobs to be done tomorrow.

http://i178.photobucket.com/albums/w244/AE86JIMMY/IMG-20140124-WA0037_zps3e186b40.jpg

adam 9

25-01-14, 17:59

Yeah I've a few bits here that's not in my thread like I've a driftwork hydro in it aswell with a brand new shotgun ..

Just never put them up ..
Our cars might look similar in the end but they still be extremely rare in the country .. :cool:

Really looks good!! When you mapping it ? What boost you gonna go?

jdmjimmy

25-01-14, 19:37

Double or single barrel shotgun? Is that the security haha. dont know yet what boost what ever the turbo can push. Ah there not that rare few more after cropping up local. Iv another onevia shell to do next aswel gathering bits for it aswel as this

jdmjimmy

28-01-14, 01:54

Tough decisions ahead in the seating department.

http://i178.photobucket.com/albums/w244/AE86JIMMY/IMG-20140125-WA0019_zps75c83faa.jpg

http://i178.photobucket.com/albums/w244/AE86JIMMY/IMG-20140125-WA0017_zpsa79dbd51.jpg

Simon

29-01-14, 18:57

two red ones hands down....

driftescort

29-01-14, 21:30

I want them red pair!

Want a pair of Kevlar Sparco Pro2000? :D

danny86

29-01-14, 21:45

pair of red brides will look well in it againist the black

jdmjimmy

02-03-14, 15:28

Took this sslluuuu out for a bath yday the dirt was annoying me.

Finishwd off some interior stuff,tidied wiring,fitted boot spoiler yet to be painted, hacked up the wings and spaced them out . They were already fucked and wasnt arsed getting frp wings yet.

http://i178.photobucket.com/albums/w244/AE86JIMMY/20140301_180835_zps32f7e31a.jpg

http://i178.photobucket.com/albums/w244/AE86JIMMY/20140301_180952_zps47ae8890.jpg

http://i178.photobucket.com/albums/w244/AE86JIMMY/2014-03-02100737_zps11deb329.jpg

http://i178.photobucket.com/albums/w244/AE86JIMMY/2014-03-01202558_zpsa215040a.jpg

John_O

05-03-14, 10:30

Absolutely love this car Jimmy. The main reason I wanted a ps13 in the first place and finally ended up with an s15. Cant wait to see it all finished up. :cool::cool:

jdmjimmy

10-03-14, 08:59

Cheers dude..

So got up sat morning fired a breky roll down me got th shed cloths on and headed out to get stuck in.

Tried to fire up the transit no go flat batter..Stuck it on charge and in the mean time fluted around and done some general tidy up on the ps. Tranny started loaded up the ps and headed for town . More hardship in the form of getting it on the ramps of the tyre place to do alignment go tit done and head back home .. Test spin went down well with a burnout to finish off.

90% done

http://i178.photobucket.com/albums/w244/AE86JIMMY/20140308_174205_zps2863195b.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20140308_174205_zps2863195b.jpg.html)

Conor sr_20

18-03-14, 23:12

Love everything about this cars looks.. What make is the boot spoiler?

D.Daly

19-03-14, 00:21

So awesome! What front bumper will you run? I think something like this would be unreal on it!
http://i1300.photobucket.com/albums/ag98/Dave_Daly/1E6C9E17-B04F-4470-965B-3E684C29D72F_zpsyon4di4a.jpg (http://s1300.photobucket.com/user/Dave_Daly/media/1E6C9E17-B04F-4470-965B-3E684C29D72F_zpsyon4di4a.jpg.html)
http://i1300.photobucket.com/albums/ag98/Dave_Daly/1939FB1A-D684-44A2-9534-9791CFABCAAC_zps6lwzuwvm.jpg (http://s1300.photobucket.com/user/Dave_Daly/media/1939FB1A-D684-44A2-9534-9791CFABCAAC_zps6lwzuwvm.jpg.html)

jdmjimmy

19-03-14, 12:13

Thats The bumper I have dude . Its the stock K's Aero bumper . Spoiler is Dmax from Japan have a roof one to go on too

D.Daly

19-03-14, 12:54

That's cool, not far off finished so! Will be one of the most beautiful 13s in Ireland! Dunno about roof spoiler, but that's only my opinion. Each to their own and so on:)

jdmjimmy

09-04-14, 21:07

Been flat out getting this bitch ready for debut in mondello on monday will have more pics towards the weekend for now here's a teaser vid

http://i178.photobucket.com/albums/w244/AE86JIMMY/th_PSrollingout_zps286d8a28.jpg (http://i178.photobucket.com/albums/w244/AE86JIMMY/PSrollingout_zps286d8a28.mp4)

jdmjimmy

10-04-14, 21:48

Finally got to a milestone Iv wanted to hit since I started this project.

Here it is Bride seat in !!

http://i178.photobucket.com/albums/w244/AE86JIMMY/20140410_210629_zps972e7058.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20140410_210629_zps972e7058.jpg.html)

Dave

10-04-14, 22:42

Great progress man! Will this thing ever see road or just track only?

jdmjimmy

11-04-14, 07:43

Id like to think it will see road aswel thats why I tried preserve as much as possible and didn't go nascar space framing and shit

PeterT

11-04-14, 22:49

cant wait to see rapeage on monday!

jdmjimmy

12-04-14, 23:11

:D Indeed petey ..

So Today was balls out with a good dose of mayhem!

Busy road test with cyclist and general Saturday drivers being in the way on the roads.

Got a dose of new tyres and went through the ballache of putting them all on many curses and shouting was done

http://i178.photobucket.com/albums/w244/AE86JIMMY/20140412_101009_zps8fa63ff6.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20140412_101009_zps8fa63ff6.jpg.html)

Yokohama Advan Neova's I used on front for steering and LingLongs on the rear :D..

http://i178.photobucket.com/albums/w244/AE86JIMMY/Screenshot_2014-04-13-00-13-01_zps94da43f1.png (http://s178.photobucket.com/user/AE86JIMMY/media/Screenshot_2014-04-13-00-13-01_zps94da43f1.png.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/2014-04-13001423_zpse43baaf7.png (http://s178.photobucket.com/user/AE86JIMMY/media/2014-04-13001423_zpse43baaf7.png.html)

A load of general looking over the car was done all loose ends tightened up all fluids etc checked for leaks

http://i178.photobucket.com/albums/w244/AE86JIMMY/20140412_160528_zpsd57c3692.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20140412_160528_zpsd57c3692.jpg.html)

So this is how were looking after a wash

http://i178.photobucket.com/albums/w244/AE86JIMMY/2014-04-12215017_zps72c50bab.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/2014-04-12215017_zps72c50bab.jpg.html)

After a year of Saturdays and the odd evening its ready for the first Test/ Drift day on Monday in Mondello

Sound Teaser all the complaining people do about SR's I love the sound of this

http://i178.photobucket.com/albums/w244/AE86JIMMY/th_Shortps_zps4506e99d.jpg (http://i178.photobucket.com/albums/w244/AE86JIMMY/Shortps_zps4506e99d.mp4)

Ross.

13-04-14, 09:08

That does sound ok from what i could hear haha! What's the spec on it?

peterhouze

13-04-14, 17:26

who let dany drive it and that sound way better with the new cams

ste

13-04-14, 18:00

would love a ps, eventhough i have a s14a i hate them lol

danny86

13-04-14, 18:53

@pedro ha he wanted to see what it sounded like. its a way different car to drive some lift in it..

Boguey001

15-04-14, 13:46

Was following this around mondello for a few laps yesterday, taught it was a road car till i realised who was, it was that clean, credit to ya jimmy.

PeterT

15-04-14, 23:21

After a year of Saturdays and the odd evening its ready for the first Test/ Drift day on Monday in Mondello

a year of herself angry didnt quite pay off so :P

jdmjimmy

16-04-14, 10:38

a year of herself angry didnt quite pay off so :P

Haha ah wasn't too bad I got to figure out the problem areas.

So This was it locked loaded and ready to go for Mondays drift day nerves etc as always especially when I didn't know how it would go.

http://i178.photobucket.com/albums/w244/AE86JIMMY/20140413_200709_zps91bac0ff.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20140413_200709_zps91bac0ff.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/20140413_195106_zps510ad808.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20140413_195106_zps510ad808.jpg.html)

Need to make a Tyre rack

http://i178.photobucket.com/albums/w244/AE86JIMMY/IMG_3681228735720_zpsec1390db.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/IMG_3681228735720_zpsec1390db.jpg.html)

Got there all in one piece unloaded all the shit then done some of this BRAAAAP!
http://i178.photobucket.com/albums/w244/AE86JIMMY/IMG_2620268811877_zps33d75d68.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/IMG_2620268811877_zps33d75d68.jpg.html)

Braaaap!

http://i178.photobucket.com/albums/w244/AE86JIMMY/IMG_6215741869566_zps95663bcb.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/IMG_6215741869566_zps95663bcb.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/1503290_582468828516424_2741095924806010785_n_zpsc c7aad05.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/1503290_582468828516424_2741095924806010785_n_zpsc c7aad05.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/10177452_582468808516426_8172399174802776376_n_zps c7af7472.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/10177452_582468808516426_8172399174802776376_n_zps c7af7472.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/2014-04-16004055_zps9ec2db35.png (http://s178.photobucket.com/user/AE86JIMMY/media/2014-04-16004055_zps9ec2db35.png.html)

Then lifted the bonnet to find masses of oil spewing out the breather set up. We Tried many different routes to get rid of the problem with some success towards the end with a make shift Orpheus that Bob Stevens suggested . Kind of ruined the day wit the thoughts of oil spewing out of the catch (bottle) and fearing harm being done it was tough to enjoy a couple of hard laps.

Once home I checked a bit more into it and found non VVT SR20's running higher boost can suffer oil coming up from the crank case so I modified the breather set up to match the s14 style.

Fingers crossed !

http://i178.photobucket.com/albums/w244/AE86JIMMY/20140415_173700_zps6964a13f.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20140415_173700_zps6964a13f.jpg.html)

Thanks to GTRslider,Danny86,Bob Stevens and Jay from DI Motorsport for helping out during the day. I would have been gone home allot earlier only for these lads

I dont know if its possible to see these vids but try the links

https://www.facebook.com/photo.php?v=826966607330759

https://www.facebook.com/photo.php?v=582468265183147&set=vb.100002599376450&type=2&theater

Driftma

16-04-14, 11:13

Also the pcv valve can fail, that's the one on the d/s/r of the cam cover. if it does it allows the boost into the crackcase and blows the oil out be no harm checking that too

jdmjimmy

16-04-14, 11:25

Also the pcv valve can fail, that's the one on the d/s/r of the cam cover. if it does it allows the boost into the crackcase and blows the oil out be no harm checking that too

Yea I checked that too it seems to work only opening on suction that will be next to go if there is anymore problems :cool:

jdmjimmy

21-05-14, 09:24

So .. Iv had an urge for TD06 for YEEEAAARS! could never find a full kit / Dish out the dollar so this week I bit the bullet and put a deposit to secure this kit. Can't wait to make some of those easily Recognisable TD06 noises !

http://i178.photobucket.com/albums/w244/AE86JIMMY/t3465563_zpsdd76014d.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/t3465563_zpsdd76014d.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/t3465563_2_zps1e4ff404.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/t3465563_2_zps1e4ff404.jpg.html)

LarZ

21-05-14, 09:45

NICE :D can't wait to hear it

pole drift

10-06-14, 14:53

External wastegate gate straight out the bonnet please

peterhouze

10-06-14, 15:03

whens the td06 due in the country

jdmjimmy

10-06-14, 15:23

It's here :afro:

alan opel

10-06-14, 18:03

sweet jim!! more bonnet flipping road tests :)

peterhouze

11-06-14, 12:25

fit it all ready

jdmjimmy

24-07-14, 08:13

Not much going on in this department old Corolla taking up a lot of my time.

Painted a wheel Bronze to see how it looked Thin I will run TE37'S All round from now on.

Going to change the rear fenders for a narrower option and have good front wings got too.

http://i178.photobucket.com/albums/w244/AE86JIMMY/20140719_174020_zpsf3fc2511.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20140719_174020_zpsf3fc2511.jpg.html)

TD06 kit turned up all looks good will be fitted once I get an ecu sorted.

http://i178.photobucket.com/albums/w244/AE86JIMMY/20140722_190719_zps9de02918.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20140722_190719_zps9de02918.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/20140722_190757_zps40e20c5c.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20140722_190757_zps40e20c5c.jpg.html)

seanie R.33

24-07-14, 09:08

Sweet jimmy.what u doin with ur old turbo?

jdmjimmy

24-07-14, 15:03

I dont know yet seanie was thinking of putting it on the 180. Will let you know.

jdmjimmy

11-09-14, 23:01

Sold the Trueno so now iv some time to get back at the datsun projects. Wings have been buggin me so put back on less damaged red one and straightened it.

Also split the headlamps to paint bezels and repair the broken lens on driver side .

http://i178.photobucket.com/albums/w244/AE86JIMMY/20140911_203557_zpse10d1037.jpg

http://i178.photobucket.com/albums/w244/AE86JIMMY/20140911_215655_zpse0263961.jpg
http://i178.photobucket.com/albums/w244/AE86JIMMY/20140911_215729_zps3452bc4e.jpg

LarZ

12-09-14, 07:59

nice! where did you get the lenses?

Ross.

12-09-14, 16:19

this is wild man!

jdmjimmy

12-09-14, 19:56

nice! where did you get the lenses?

bought the lamps with them. Cheers ross ha

jdmjimmy

30-12-14, 00:25

So Thinking of selling this as something iv had my eye on a while has come up I don't have a logbook for the car and its not a minter . Straight car goes well and reliable. Price will €6500

adam 9

31-12-14, 13:25

Interest in selling a part or two off it ?

jdmjimmy

31-12-14, 18:40

Yea no bother €6500 and the rest comes free lol

jdmjimmy

11-02-15, 12:07

After selling up all my other cars and a shit load of parts I was in 2 minds what to do with this . Interest levels being low for the drift scene wasn't helping.

Last Saturday I got a burst of enthusiasm and decided to stick on the Trust TD06 setup. Probably going to stick a kit on it change of wheels and get some more drift days in .

Fired it up with the new turbo , so next is ECU upgrade and map

http://i178.photobucket.com/albums/w244/AE86JIMMY/20150207_131929_zpsd6d3bc3b.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20150207_131929_zpsd6d3bc3b.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/20150207_144439_zps5c418368.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20150207_144439_zps5c418368.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/2015-02-08211932_zpsdd98aaf1.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/2015-02-08211932_zpsdd98aaf1.jpg.html)

LarZ

11-02-15, 22:07

I've projectors here for you if you want me to mind those bricks for you... :)

garyae86

11-02-15, 22:13

What ecu are you going to run and when will we see It on track ?

jdmjimmy

12-02-15, 01:01

I've projectors here for you if you want me to mind those bricks for you... :)

Nah your alright dude I'm just using these so I dont smash up the original glass Bricks ;)

Nistune or power fc garry . Should be out once mapped

jdmjimmy

22-02-15, 00:58

Huge updates for this ,

Removed white steeribg wheel and fitted suede with rrace car yellow line

http://i178.photobucket.com/albums/w244/AE86JIMMY/20150218_183530_zpswz0oftf0.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20150218_183530_zpswz0oftf0.jpg.html)

LarZ

22-02-15, 12:18

Nah your alright dude I'm just using these so I dont smash up the original glass Bricks ;)

Believe it or not, clear lenses like that don't actually make them worth less. They're still desirable and they're still oem bricks, just different lenses.

jdmjimmy

22-02-15, 14:32

Their circuit sports lenses , I know this already. I was removing the urine

LarZ

22-02-15, 19:05

lol ok...

peterhouze

22-02-15, 20:04

So Thinking of selling this as something iv had my eye on a while has come up I don't have a logbook for the car and its not a minter . Straight car goes well and reliable. Price will €6500

on my way

adam 9

23-02-15, 00:37

If you decide to put a kit on it jimmy please keep me in mind first dibs in that aero kit .. Especially bumper :)

Should make some power on td06 now ..

Who you get to map it ?

jdmjimmy

03-03-15, 21:36

Yea no probs , I might keep it tho as I change my mind like the weather . Not mapped yet waiting on an ecu.

nikkisixx69

03-03-15, 22:20

700 euro offer on aero bumper from american friend lol

jdmjimmy

04-03-15, 00:21

Sold to pyms Merican friend :cool:

jdmjimmy

15-03-15, 17:12

Got some enthusiasm to mess about with this Saturday, fitted a navy Bride Zeta after selling the red ones.

Hooked up the Greddy profec II boost controller to work with the external gate

Picked up an Apexi power fc and commander :-)

Made up an intake pipe for the Td06 / Z32 & filter probably will change it again just temporary.

Lastly I bought some new rollers .

Work emotion XT7
18x9.5 et12

Should have them during the week so made a terrible mock up on Microsoft paint

http://i178.photobucket.com/albums/w244/AE86JIMMY/2015-03-15%2016.20.01_zps3mwealet.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/2015-03-15%2016.20.01_zps3mwealet.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/photo_zpsauzmkgpd.jpeg (http://s178.photobucket.com/user/AE86JIMMY/media/photo_zpsauzmkgpd.jpeg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/Screenshot_2015-03-13-12-50-00_zpsdfjypecq.png (http://s178.photobucket.com/user/AE86JIMMY/media/Screenshot_2015-03-13-12-50-00_zpsdfjypecq.png.html)

jdmjimmy

21-03-15, 18:53

After a busy dickhead of a week working its nice to chill in the shed on saturday,

unwrapped these beasts, had a roll and Tea with the company of my dog lol.

http://i178.photobucket.com/albums/w244/AE86JIMMY/2015-03-21%2018.44.40_zpswhh7diq5.png (http://s178.photobucket.com/user/AE86JIMMY/media/2015-03-21%2018.44.40_zpswhh7diq5.png.html)

fitted the power fc and fired it up .. GREAT SUCCESS !!!

http://i178.photobucket.com/albums/w244/AE86JIMMY/2015-03-21%2018.29.45_zpsdwqjfok7.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/2015-03-21%2018.29.45_zpsdwqjfok7.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/2015-03-21%2018.24.20_zps89ioklqw.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/2015-03-21%2018.24.20_zps89ioklqw.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/2015-03-21%2018.26.21_zpsqpaseo1q.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/2015-03-21%2018.26.21_zpsqpaseo1q.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/20150321_171803_zpsjuvifluj.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20150321_171803_zpsjuvifluj.jpg.html)

The vedict is smaller front rubber or possibly may run 17" TE37's up front

jdmjimmy

06-09-15, 15:18

Found a midmount manifold to get those unmistakable noises.

The wastegate flange had been chopped off so had one fabbed up. Spent the day dicking about with pipework happy with the result as their nicely tucked undrneath

http://i178.photobucket.com/albums/w244/AE86JIMMY/20150902_001438_zpsnyzm3wsr.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20150902_001438_zpsnyzm3wsr.jpg.html)

LarZ

06-09-15, 22:20

Nice one

Hachi

07-09-15, 00:04

Looks good, need a video of these noises you speak of

jdmjimmy

03-01-16, 18:11

So if someone could take this away finish and map it that would be great.

In recent times I robbed the XT7s for the JZX90 not sure yet what wheels will end up where but I bought some Rotas after years of expensive wheels it's the best option for whenever this see's track again lol

http://i178.photobucket.com/albums/w244/AE86JIMMY/20151001_174225_zpsgulels7c.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20151001_174225_zpsgulels7c.jpg.html)

Got some Origin front wings aswel to even out the lines with 50mm rears

http://i178.photobucket.com/albums/w244/AE86JIMMY/20160103_180608_zpsnvjo83cl.png (http://s178.photobucket.com/user/AE86JIMMY/media/20160103_180608_zpsnvjo83cl.png.html)

NoelB

03-01-16, 18:24

That is so badass looking

Hachi

03-01-16, 22:13

Awesome stuff Jim! Are those genuine rota's or did you cheap out and buy copies? :P

Seriously though it's looking amazeballs

jdmjimmy

04-01-16, 21:00

Haha .. Dur de original Rotaz laaad.

Would love to get the time to finish it and wreck

jdmjimmy

17-01-16, 12:33

Got the finger out and started chopping the top mount downpipe and modify it to suit the midmount setup.

By no means have a clue what I'm at but chopped a bit out of another exhaust with a bend to suit.

http://i178.photobucket.com/albums/w244/AE86JIMMY/20160117_122036.png_zpswkf04tzg.jpeg (http://s178.photobucket.com/user/AE86JIMMY/media/20160117_122036.png_zpswkf04tzg.jpeg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/20160117_122205.png_zpsoant4gmf.jpeg (http://s178.photobucket.com/user/AE86JIMMY/media/20160117_122205.png_zpsoant4gmf.jpeg.html)

After minimal cursing which is unusual I had something that resembled a downpipe so next is add in a flexi .

jdmjimmy

18-03-16, 12:00

Pulled this slut out , working through the list of things needing doing before mapping .

Gave it a wash to generate some interest my end lacking the past while but excited again with some outrageous plans for the front end also :cool:

http://i178.photobucket.com/albums/w244/AE86JIMMY/IMG_20160317_184128_zpsvqo56cgy.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/IMG_20160317_184128_zpsvqo56cgy.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/20160318_002111.png_zps3gxcxdzs.jpeg (http://s178.photobucket.com/user/AE86JIMMY/media/20160318_002111.png_zps3gxcxdzs.jpeg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/20160318_001751.png_zps4dkyzhx3.jpeg (http://s178.photobucket.com/user/AE86JIMMY/media/20160318_001751.png_zps4dkyzhx3.jpeg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/20160317_182130.png_zps9vogy3d1.jpeg (http://s178.photobucket.com/user/AE86JIMMY/media/20160317_182130.png_zps9vogy3d1.jpeg.html)

got some more Kai's 18x9.5 et12 which I will probably keep up front

http://i178.photobucket.com/albums/w244/AE86JIMMY/20160317_173049.png_zpssglpnric.jpeg (http://s178.photobucket.com/user/AE86JIMMY/media/20160317_173049.png_zpssglpnric.jpeg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/20160317_182431.png_zpsbcsv5t1c.jpeg (http://s178.photobucket.com/user/AE86JIMMY/media/20160317_182431.png_zpsbcsv5t1c.jpeg.html)

A fine box turned up this morning from Andy Joyce (user : juice)

http://i178.photobucket.com/albums/w244/AE86JIMMY/20160318_114803_zpsehi00m1k.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/20160318_114803_zpsehi00m1k.jpg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/Mobile%20Uploads/20160318_121637_zpscarf0i1m.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/Mobile%20Uploads/20160318_121637_zpscarf0i1m.jpg.html)

Greg

18-03-16, 19:37

Such a badass car. Do more skids in it soon please.

jdmjimmy

19-03-16, 17:59

Thanks Gregory. . I will be doing skids asap nearly there

Exhausting. ...
http://i178.photobucket.com/albums/w244/AE86JIMMY/Snapchat-1798359518601645136_zpsgjgjkyhx.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/Snapchat-1798359518601645136_zpsgjgjkyhx.jpg.html)

That's that ballache out of the way. Sounds insane

Have these to go in aswel

http://i178.photobucket.com/albums/w244/AE86JIMMY/Snapchat-8568550601431978030_zpskpqrly4e.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/Snapchat-8568550601431978030_zpskpqrly4e.jpg.html)

Oh.. and Odyssey headlights to go with the Odyvia front thats on the way
http://i178.photobucket.com/albums/w244/AE86JIMMY/Mobile%20Uploads/20160318_121343_zpsnulcyqyu.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/Mobile%20Uploads/20160318_121343_zpsnulcyqyu.jpg.html)

Hachi

19-03-16, 18:59

Lookin good! What brought on the change of direction in terms of the front end? Did the Low Brain Drifters PS13 give you a bit of a push?

jdmjimmy

19-03-16, 23:25

Iv always liked the Rei Odyvia kit but yea lbd defo swayed it, when the opportunity came to buy the front I took it

NoelB

20-03-16, 13:29

Will it be the first Odyvia in the country? Such an aggressive front end.

jdmjimmy

25-03-16, 21:12

@NoelB fairly sure it is yea..

Shit happened today looks good so far , going to stick Xt7s up front tomorrow should be killer

http://i178.photobucket.com/albums/w244/AE86JIMMY/IMG_20160325_201154_zps4op9tokk.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/IMG_20160325_201154_zps4op9tokk.jpg.html)

niall s14a

26-03-16, 10:46

Looks awesome Jim, one of the coolest cars on here

jdmjimmy

26-03-16, 16:46

Cheers dude
Nice bit of choppy choppy needs doing on the front panel .

Spent a couple hours on this today

http://i178.photobucket.com/albums/w244/AE86JIMMY/Mobile%20Uploads/Snapchat-9053176153111208428_zpsph9n3ubn.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/Mobile%20Uploads/Snapchat-9053176153111208428_zpsph9n3ubn.jpg.html)

Headlight mounting brackets

http://i178.photobucket.com/albums/w244/AE86JIMMY/Mobile%20Uploads/Snapchat-5259540383467936044_zpsg5nx4xwj.jpg (http://s178.photobucket.com/user/AE86JIMMY/media/Mobile%20Uploads/Snapchat-5259540383467936044_zpsg5nx4xwj.jpg.html)

Banged the XT7s up front . Odyvia bonnet should be here next week.
http://i178.photobucket.com/albums/w244/AE86JIMMY/20160326_160135.png_zpse01st0lp.jpeg (http://s178.photobucket.com/user/AE86JIMMY/media/20160326_160135.png_zpse01st0lp.jpeg.html)

http://i178.photobucket.com/albums/w244/AE86JIMMY/20160326_165827.png_zpstbrgkwi3.jpeg (http://s178.photobucket.com/user/AE86JIMMY/media/20160326_165827.png_zpstbrgkwi3.jpeg.html)