DaveZigen
03-07-12, 16:29
A car I've been interested in has come up for sale and I've said I'd see if anybody would be interested in my current competition car. It's 100% good to go for competition (very competitive) and has been worked on and maintained by some of the best in the country with no expense spared!
Engine/Power Spec:
SR20DET from a S15
GT2871R Turbo
Custom Front Mount
Walbro Fuel Pump
Z32 AFM
550cc Injectors
Uprated manifold
Uprated downpipe/elbow/custom shotgun exhaust etc.
I'm no mechanic so I'll have missed loads more....
Mapped on Nistune by Robbie at TDP and runs very reliably to these figures
http://i46.tinypic.com/2ptnzvq.jpg
Chassis:
Fully tubed front end (All work carried out by Gem at CS Autos)
Custom hubs/subframe moved/custom toe arms (awesome lock)
Brand new K-Sport fully adjustable coilovers
All brand new Driftworks rear arms
Strut braces front and back
Cut out rear arches
Drilled and grooved discs on front
Skyline rear brake setup
Uprated Anti Roll Bars etc.
Interior:
2 Sparco fixed buckets and harnesses
3 autoguages
Custom Hydro setup
Exterior:
Full respray in custom blue by Tom Lawlor Autobody 4 months ago
Fibreglass vented bonnet
Full Uras kit
50mm rear arches
5Zigen FN10rc's up front 17x10 et10 on new Maxsports
XXR 18x10 on the rear with 18x8.5 spares, all on rubber
Safety:
Car is PD logged so has everything needed
Cage is fully weld in and built by John Stone to very high spec
Car has been dry stored/maintained/alligned by Dan Moorhead and Wes at WKD Imports and has wanted for nothing since I started competing.
I've not gone into every nut and bolt on it but will go into more detail with a potential buyer:)
It's a ready-to-rock competition car which stands me an awful lot at this stage but If someone want to take it for 7K I'll let it go!
No p/ex or low offers and if the car I'm looking at sells I'll happily keep her as it's been an awesome car to compete in!
http://i48.tinypic.com/dmqmx1.jpg
http://i47.tinypic.com/24fwyvb.jpg
http://i49.tinypic.com/29qobx5.jpg
http://i49.tinypic.com/142yqd.jpg
Thanks lads and pm me if interested!
Engine/Power Spec:
SR20DET from a S15
GT2871R Turbo
Custom Front Mount
Walbro Fuel Pump
Z32 AFM
550cc Injectors
Uprated manifold
Uprated downpipe/elbow/custom shotgun exhaust etc.
I'm no mechanic so I'll have missed loads more....
Mapped on Nistune by Robbie at TDP and runs very reliably to these figures
http://i46.tinypic.com/2ptnzvq.jpg
Chassis:
Fully tubed front end (All work carried out by Gem at CS Autos)
Custom hubs/subframe moved/custom toe arms (awesome lock)
Brand new K-Sport fully adjustable coilovers
All brand new Driftworks rear arms
Strut braces front and back
Cut out rear arches
Drilled and grooved discs on front
Skyline rear brake setup
Uprated Anti Roll Bars etc.
Interior:
2 Sparco fixed buckets and harnesses
3 autoguages
Custom Hydro setup
Exterior:
Full respray in custom blue by Tom Lawlor Autobody 4 months ago
Fibreglass vented bonnet
Full Uras kit
50mm rear arches
5Zigen FN10rc's up front 17x10 et10 on new Maxsports
XXR 18x10 on the rear with 18x8.5 spares, all on rubber
Safety:
Car is PD logged so has everything needed
Cage is fully weld in and built by John Stone to very high spec
Car has been dry stored/maintained/alligned by Dan Moorhead and Wes at WKD Imports and has wanted for nothing since I started competing.
I've not gone into every nut and bolt on it but will go into more detail with a potential buyer:)
It's a ready-to-rock competition car which stands me an awful lot at this stage but If someone want to take it for 7K I'll let it go!
No p/ex or low offers and if the car I'm looking at sells I'll happily keep her as it's been an awesome car to compete in!
http://i48.tinypic.com/dmqmx1.jpg
http://i47.tinypic.com/24fwyvb.jpg
http://i49.tinypic.com/29qobx5.jpg
http://i49.tinypic.com/142yqd.jpg
Thanks lads and pm me if interested!