94 uk s14 loom into 98 jap s14a

[s15_spec_r]

would a engine and loom from a 94 uk s14 work in my 98 jap s14a?
the interior loom is still in my car,

would i just have to run a jap s14 ecu for it to work?
is there much work involved in getting the 94 ecu to work in my 98?


sorry if it badly described

[mr.jailbait]

the ecu connectors are different,so you'd need one of those adapters that run a s15 power fc on a zenki s14 car.probably minor rewire on top of that also.

[s15_spec_r]

the ecu connectors are different,so you'd need one of those adapters that run a s15 power fc on a zenki s14 car.probably minor rewire on top of that also.

ara fuck bollox, will have to hold out so,
cheers man

[geordier1]

I put a 96 UK200 sx engine and loom and ecu into a 94 jap s14.the nats system is not to hard to do away with

[s15_spec_r]

I put a 96 UK200 sx engine and loom and ecu into a 94 jap s14.the nats system is not to hard to do away with

its not the nats thats bothering me as once i fit a jap ecu it will be gone, its just im wondering of what work is involved in getting the zenki ecu and loom to work in my 14a

[mr.jailbait]

you'll need one of these yolks

http://apexi-usa.com/shop/index.php/power-fc-components-nissan-s14-bmc-power-fc-obd2a-to-obd2b-adapter-harness.html


then rewire/re-pin a couple of the wires to convert the s15 to s14a

its a long way around,but it works



or you could chop 2 ecu connectors and rewire it from scratch,but you would more than likely lose your sanity half way through

[way2fastforu]

dont be a lazy bollox doogle an jus get a whole loom outta watever yr s14 is handiest get your hands on...ya'll only give yourself a pain in the sack tryin to join a zenki an kouki loom together