R32 build

[DennyR32]

hello have a white r32 that im putting a rb26 into over the past 3 years due to funding problems from lack of work.
I got it as first owner 4 yrs ago with rb20 trust filter,unknown cat back,silenced decat rsr downpipe std turbo and elbow and i/c hks delimiter,greddy emanage blue,profec b sp 2
Volk gtp's,kts coilovers,tein tension rods
http://i596.photobucket.com/albums/tt47/DennyR32/02082008012.jpg
,unknown upper suspension links??
http://i596.photobucket.com/albums/tt47/DennyR32/IMG_0747.jpg
gtr bonnet,grille,bumper
the engine when i got it had a bit of wear,especially the head and bottom end!! some bits of the valve guides had broke off and a few were cracked ready to break.
http://i596.photobucket.com/albums/tt47/DennyR32/IMG_0667.jpg more tomorrow

[nicky h]

Welcome to di ,
nice to see some 32 love ,
looks well keep the pics coming

[slithertooth]

Welcome abord lad, fair play to ye staying true to the car in these hardy times, get some more pics up

[galway joey]

very nice car mate... how far on are ya with the transplant?:)

[DennyR32]

cheers lads,iv always wanted askyline so i wasnt going to give it up without a fight lol
Right the bottom end spun a bearing and marked the crank so brought it to ESL in laneborough who took .5mm of the crank and had it polished.i think the engine was donated from a 33gtr as it had the long nosed oil pump drive.
added a new n1 oil pump,acl bearings,new rings from erics performance in america.i dont have any pics of the build up sorry:(
heres the nearly finished lump
http://i596.photobucket.com/albums/tt47/DennyR32/IMAG0045.jpg
http://i596.photobucket.com/albums/tt47/DennyR32/IMAG0047.jpg

[DennyR32]

oh yea i put about 50 hrs into the inlet manifold:p
i like shiny stuff must be a bit of magpie in me!

[Micko]

Really nice example, like where this is going! What turbo's are you running?

Look like Nismo upper links by the way!

[murray sr22]

i thought u had got rid a dis yoke lad shes of the road a long time lad? shel b some yoke with the rb26?

[DennyR32]

Really nice example, like where this is going! What turbo's are you running?

Look like Nismo upper links by the way!

cheers micko always wanted to know what they were.that pic was soon after i got it this time 2008!!
there standard 33 turbos (for now) with 30k kms on them cousin got the from japan and never used them.done a few jobs for him and gave them for nothing!
no play in the shafts happy day

[DennyR32]

i thought u had got rid a dis yoke lad shes of the road a long time lad? shel b some yoke with the rb26?

it sure has its the funding thats the problem but not to worry i winning the euromillions tonite ha!

[DennyR32]

since the guides were in bad shape due to wear,the valve seats suffered as a result.so got a set of valve guides from erics performance again.sent the head of to corcorans in castlebar (engine-re) who pushed in the guides,machined all the shims,reseated the valves and lapped them in.
again sorry for lack of pics

[johnmaloney88]

it's a load of scrap dennis, send it down the green road to me and i'll take care of her! :-)

[DennyR32]

it's a load of scrap dennis, send it down the green road to me and i'll take care of her! :-)
hows things john any craic?oh yea take it now when all the hard stuff is done:p

im going to go for a change of colour with vaux glacier white.i had a bit of a tip with her 3 yrs ago and done a quick fix to keep me going went from this:
http://i596.photobucket.com/albums/tt47/DennyR32/18112008.jpg
to this:
http://i596.photobucket.com/albums/tt47/DennyR32/30072009.jpg
about a month ago i got a friend to come over to do the engine bay and to tidy up my previous mishap.i had a front corner of a doner gtr cut out and trimmed it down weled into place
http://i596.photobucket.com/albums/tt47/DennyR32/IMAG0032.jpg
and a few coats of glacier white
http://i596.photobucket.com/albums/tt47/DennyR32/IMAG0039.jpg
http://i596.photobucket.com/albums/tt47/DennyR32/IMAG0041.jpg
drilled gtr brakes got from doner
http://i596.photobucket.com/albums/tt47/DennyR32/IMAG0030.jpg

[johnmaloney88]

who helped with the bodywork denny?

[DennyR32]

who helped with the bodywork denny?

That little buck richie,done a great job on it.i did the welding was a bit tough as it was 1mm mig wire got there in the end though!!!

[DennyR32]

Update coming soon

[noiseMaker_]

Fair play to ya for committing to this beaut and not selling it on! Great job so far! Looking forward to the updates

[DennyR32]

How's things folks I still have the car and hopefully I'll make a start on it in a couple of weeks. She's sitting on a set of vsxx's now and alloy gtr wings👍

[lady89]

Nice one! Dont forget to post some pics too!