Lexus is200 question

[Chargespeed]

I have a 00 Lexus is200
Unfortunately it failed nct on rear bushes
Bushes can not be bought separate you have get complete hub so i got 2nd hubs and fitted them and still a little play
To buy theses off Toyota is €270 plus vat each and I need 2

Can anyone tell me if I can get them poly bushes
There is 2 bushes in either side
Both are pressed into hub assembly

Cheers

[pinny]

these are the same as a vectra bushing, google should tell you which one exactly

[Mick K]

these are the same as a vectra bushing, google should tell you which one exactly

This is true!

[pinny]

vectra 96-01 rear hub bush.
has to be a main dealer part as you need its outer surface to be steel.

you take off the hubs and press out the old bush, give the area a good clean up
use a vernier to measure the inner diameter of the hole on the hub.
you then get the bush skimmed to be the same as standard they are a little too big - hence needing a steel outer case so it can be skimmed.

[m3con]

Look up hard race updated bushings put them in the
Wife's car great job cost $ 120odd plus shipping tried
The vectra one ok but don't last

[PepperS13]

150e here of mbarry

http://www.driftireland.com/forum/showthread.php?t=21276

[Chargespeed]

Cheers lad

[Mick K]

We sell that vectra bush to factors for 6quid,Retails at 12 +vat!