View Full Version : Bn sports 180sx - Rebuild!
I decided to rebuild my drift car from last year, Gem-s13 told me Ffrench had Johnny P's 180 shell there with a savage cage so i went for a look and ended up bringing it away.
The shell is fabricated now, i just finished the gearbox tunnel, im running RB box so i went a small bit bigger than standard without going mad because im want to run the original heater.
I still have the boot to do when i get my alloy tank but im in no hurry with that at the moment.
First time EVER uploading pics so i dont know if this will work or not :confused:
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0008.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0007.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0005.jpg
wat happened your own shell!
Ha ha cool it works, Johnny's 07 license was in the car the pic came out blurry.
I only took a few pics this evening ill get pics up of what the old car looked like.
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0009.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0010.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0011.jpg
yea and thanks to me:p:p:p:p
looking cool ted...
Most of them are blurry actually, must do a bit of practice with the camera!
The tub is fully welded on the underside and seam welded on top.
The gearbox tunnel is welded fully on both sides.
wat happened your own shell!
Im selling it to a buddy that wrote his own off. I wanted to buy another shell and have it further along than i am at the moment but thats always the case.
I mainly bought this shell because the cage is ridiculously cool!
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0016.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0013.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0015.jpg
Its manky dirty inside because it was upside-down while i can cleaning off the shutz and it ran inside the car,
Dont worry it wont be that way long :)
The shell was half seam welded when i got it but it was high and lumpy enough,
I seam welded what wasnt done but ive yet to grind the old welds.
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0012.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0017.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0014.jpg
Thats it for the evening. uploading takes ages :eek:
could cage in this alrite think jonny got it done some place in the uk
a few years ago
Yeah i was told Nemesis in the uk did the cage, few pics of the car here and one in japan being driven by Andy Gray of Powervehicles.
http://i741.photobucket.com/albums/xx58/frankae86/franksbn4-1.jpg
http://i741.photobucket.com/albums/xx58/frankae86/franksbn5.jpg
http://i741.photobucket.com/albums/xx58/frankae86/180sxmobara.jpg
Better days ^^^
Afraid not kid, the best is yet to come!
no flame decals please :)
serious cage, looking forward to seeing how this turns out
Wont have those graphics next year, how cool this car will be will depend on how much money ill have.
Someone buy my skyline!!!!!!!!!!!
Lookin savage frankie cant wait to see the finished article
Thats the thing Mick, i HOPE i have it ready in time for next year!
Will be priming the front arches and engine bay in the morning.
alan sinnott
21-11-09, 22:05
looking good frank.
Cheers lad, wonder now did i take enough out for the tunnel.....
Its a good big bigger than standard and with a bit of modification ill be able to use the standard heater unit.
way2fastforu
21-11-09, 22:26
be cool wen its finshed keep us updated wit pics :D
Now that i can use photobucket im gonna go mad with pics :D
Bought 2 fancy parts for it today, pics of them soon too!
way2fastforu
21-11-09, 22:37
savage wat shiny/fancy parts?...i still cant get the hang photobucket prop never no which code theng to put in between the img thing
Bart told me what to do maybe send him or Daraagh a pm how to do it, its handy enough in fairness.
Bought driftworks lower arms and a Bride rev clock. Both via DriftIreland :)
Well i see you have her ripped! Roll on prodrift next season, Im looking forward to competing with you (against you ha)! And keep the pics coming!
P.S KEEP ER COUNTRY!!!!!!
ur boing me proud mann keep up the good work
seen this shell sitting up when i picked up the s14,cage is the shit,good buy
Cheers lads, yep got the front primed today, lick of paint next and start offering bits up to her. Pics tomorrow.
It will be exciting up against ya next year alrite Dan baby :)
Looking cool frank,the bits are nice and safe for ya..:P clock looks well in the cam...haha!!!
Lol i was waiting for that paul :p
Ill be drafting you in to wire it for me!! i couldnt wire a radio :(
thats a cage and a half! best of luck getting her back together and running
just needs gussets to the the pillars to finish it
just needs gussets to the the pillars to finish it
Its seam welded to the pillars/floor etc..... Its too tight to the body for gussets ;)
Ill see if i can get pics of it next round.
Gave the front of the car a lick of paint this evening
Went with a nice solid yellow and i didnt spare the paint :p
Few pics.....
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0041.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0039.jpg
And just one pic of the cage welded to the body
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0038.jpg
FOOK ME THATS YELLOW:cool:
Coming together nice dude
Cheers, ah its in the booth with about 30 lights hopping off it there so it looks real bright ;)
I like it tho,Black body with the yellow underneath and inside,Very cool.
Your not right but your not far off :D
Ill try kid, more pics
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0043.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0042.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0040.jpg
Ha,I like your thinkin son,That is very very cool
For under the bonnet and the both arches and front panel i used 2ltrs of primer, spent almost a day rubbing it down by hand :rolleyes:
3/4 of a ltr of white to counteract the poor opacity of the yellow
And finally 1 and a half ltrs of 2k yellow!
And the insides of my Tubs, I cut out the square section thats normally there and Johnny P was rubbing it on both sides!
If i can find the piece i cut out il put up a pic of the difference
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0046.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0045.jpg
comin together nicely man, bright orange arms gona clash with d yellow:p
Ill just have to paint them so ;)
way2fastforu
28-11-09, 00:00
savage work on the arches man they came out class
savage work on the arches man they came out class
Thanks dude, im happy with the alrite, for a change :cool:
way2fastforu
28-11-09, 14:57
engine bay looks like savage job too...be sprayin mine soon enuf half thinkin of tubbin the arches cos the 18's catch a bit...how did ya find it to do??
It was a much easier job than i thought, as i said i marked out what i wanted to cut away (the square bit up the front) and shaped a piece of bonnet material 1.5mm i think it was.
Cool job frank!! ya goin yellow for this year?
Not on the outside no, something darker than that :)
Not on the outside no, something darker than that :)
black?:p:p:D
I was going to but its just too common lad, wont be far away from it though!
william ere. tanx for da heads up on da site frank. da 180 build looks good. any big plan with da engine:D
Not sure yet lad, depends on what money i have really,
Lad i know has a Brian Crower stroker kit i had a few wet dreams about that
E85 is also buzzing around my head 450+ would be nice but to be honest i wasnt caught for power as it was :D
Im gonna have the shell and the chassis 100% (i hope) and i can always drop in more power after.
So far ive bought for this car
RB25 box,
DW lower arms,
Winged/baffled sump,
and a cool Bride rev clock.
Will get pics up next time, the camera ran out of battery on me yesterday.
Unfortunatley those few items are nothing compared to the list of stuff i do want for the car :(
cant wait 2 see it on da track.are u doing prodrift
:D
Chalk it down kid, give a call over again around the new year or that.
She should be rolling and stuff then anyway
The quality of work looks massive ;)
Cant wait to see it when it's finished.
Sound, like i said if your around town gimmie a shout and ya can pop out for a look!
Serious work going in franky,wish i had your motivation!!:D
Have the red car up at the garage this week, have it ready to take out the engine tomorrow evening. Even got a chance to start bolting a few bits under the bonnet of the new car, sick of just taking stuff off ;)
The wiring is going to wreck my head! and take me forever to do.
Nice Project man, the cage is sexy and the yellow is hot!! :) Looking forward to seeing her out next year!! :)
The wiring is going to wreck my head! and take me forever to do.
give me a shout if ya need a hand...what wiring have ya to do??? is it not just swap everything over??
give me a shout if ya need a hand...what wiring have ya to do??? is it not just swap everything over??
no he is not allowed the bn car was just a road car with a cage he needs proper man spec no wireing drift car!!!!! isnt that right frank!!
jesus, that cage is mental and very tight to the shell..class job. yellow is looking sweet too by the way.
After hearing all this needing lights working i might run wires for them.
Stripped my engine this evening, ive pics loading as we speak.
Also got my alloy tank and dry cell battery is on the way so ill have the inside and underneath of the car painted by next weekend i hope!
I must do a bit of thinking before i even post about wiring paul :rolleyes:
I want it very simple and tidy but you are right its mostly the same wires and plugs.
Well took the engine out thurs night and started ripping it today.
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0047.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0049.jpg
I always thought it was a red top engine but Gem suggested it was only a painted blacktop, i have numbers off the pistons coming up so people might be able to tell me....
jamie180sx
05-12-09, 20:03
it has the cooling fins on the head so I'd say it's a redtop
Cool, Expand on the cooling fins for those peole who dont know what your talking about lad...... would'nt be me of course ;)
When i bought the car the clutch was gone and bobs were scarce so i just put in an exedy paddle and also got a lightweight F/W.
Ive heard loads of people saying they are a crap clutch and so on....
I was out 10 times with the car last year and the clutch is like new!
Maybe i wasnt using it enough :cool:
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0052.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0051.jpg
To bring the car to the garage i put the TRIAL wheels i got under it,
Dont know what to make of them to be honest, i might use them.
Paint the center's and the car will be lower.
What do ye think?
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0053.jpg
Editing just to say Gem i dont want your opinion, i already know it :D
Anyone else ill welcome them ha ha
Aidan Hogan
05-12-09, 20:38
personally ive never liked the 3 spoke wheels but thats just my opinion.
During a drift day at mondello i noticed the car was building up pressure in the water system and throwing it out the overflow so headgasket sprung to mind.
The car was supposed to have metal H/G and cams etc but when i ripped it i found everything to be totally standard in the engine. I think the engine was changed since andy gray had it as im sure he said it had a metal H/G.
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0054.jpg
Here is the top of a piston to verify what model engine it is
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0056.jpg
This is one for Colm, the pick up pipe! which one is this again :p S13 i suppose
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0058.jpg
The good news is the headgasket is gone but the block is damaged,
My boss wasnt around this evening to give his advice but i hope it can be skimmed or whatever
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0070.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0071.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0072.jpg
I took the block into the booth to get a bit of light on the subject, we will see now how they turned out, my pics still come out crap :(
The first pic is without the gasket, you can see a groove pitted into the block
The second is with the gasket down where its gone
The last pic is how the gasket should be, nice and even all the way round.
way2fastforu
05-12-09, 21:14
spray the trial wheels some mad colour they'd be class :D
spray the trial wheels some mad colour they'd be class :D
Im actually thinking of painting them the colour or a similar colour to the red car, Ah we'll see they are not a pressing thing yet.
Few more of my poor block and one of the shell bearings, think that pic came out bad
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0069.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0068.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0060.jpg
way2fastforu
05-12-09, 21:31
an are ya leavin the car that colour or sprayin it another one???
The new car is being painted a different colour.
Im 99% sure which colour but i wont say anything until its painted in case i change my mind or whatever.
Hardest past of the job is tidying up after
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0064.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0063.jpg
Now thats enough pics me thinks, next time i hope to have the car painted inside and underneath. Then i can start throwing parts at the car yay :)
way2fastforu
05-12-09, 21:49
ah ya im like that too pick a colour then at last min change my mind:rolleyes::D
Nice build thread mate, plenty of pics FTW :D
You have mail
Replied there kid, uplaoding pics is a pure pain in the hole
ye it is, but well worth the time when you can show off your great work!! Cheap wheels ftw!!
Ha no great work done as of yet! And time is running out
Stoopid question here but what is are the differences between Redtop and Black?? Is there alot?
Thats a question i cant answer, Alan Sinnott says the redtop cams are rite good other than that im not sure. Gem mentioned bigger valves or something.
Dunnedriftin
05-12-09, 23:43
Red top dosnt have VVT iirc..
Not bad for a days work :D
its kinda hard to tell from the pics but id say a skim on your block will clean up any damage on it lad, your better off getting the head and deck skimmed if your going to use a mhg anyways.
As far as i know theres sweet feck all differeneces between the redtop and blacktop sr's that came in 180s, neither had vvt. The black top in s14s has vvt, a different rocker cover, differnt cams, extra oil holes in the head etc.
The shells look pretty decent in that pic, is there any wear on the crank?
Oh and that looks like the s14 oil pick up too ;)
The bearings were in good order ya, one of the shell bearings had fair wear on it but nothing major.
One of the main bearings had a line through it i can feel with my fingernail like it picked up a bit of grit one time i checked the crank and cant see any mark at all on it.
Ill decide what to do and give the block to the engine engineer lad.
Last week was one of those times your doing work but you dont see much progress, balls!
Primed it inside,
Painted the cage,
Got my alloy tank and got it modified to fit where i wanted it
Made brackets to hold the tank
Not sure did i do much else :(
Pics tomorrow, might paint it inside tomorrow but i cant finish the boot till i get the swirl pot and pump n stuff.
On a good note ive decided what to do with my engine and lets just say where the block is pitted it wont matter anymore :)
The downside is having no money because nobody will buy my cars and wondering who ill get to do the engine work for me
Few of the cage painted
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0033.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0034.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0035.jpg
Frame i made for holding the tank
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0037.jpg
The back corners modified to have the tank closer to the centre
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0039-1.jpg
The tank sitting in place, the straps must still be made and the cardboard is for a template for aluminium thats what the boot floor is gonna be :p
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0036.jpg
The tank was supposed to have a built in swirl put but it doesnt so i cant finish the boot now coz im waiting for it, Colm (on here) told me the bosch 044 pumps are best fitted under the outlet of the tank so im gonna make a box to hold the pump and filter.
alan sinnott
13-12-09, 18:24
proper job.
way2fastforu
13-12-09, 18:24
the grp4 fabrications tank looks the job man...they only in road from me sound enuf to deal wit so they are.
savage job painting the cage id say it was fairly tedeous masking it all up:confused:
Would ya consider mike deane for building your engine?
Dunnedriftin
13-12-09, 18:27
Shes lookin fair sweet now lad!
puttin me to shame! :o
i need a job, this no income is poxy!
Cheers boyo's
Dunnedriftin : Im building the car on a minimal income lad, i havent drank in ages and ive a wedding coming up so cant imagine what kind of a state im gonna be in :eek:
Micko : Ya was a bit of a wanker to mask off alrite, i said id paint the cage first it would be easier pain the rest after. I didnt go mad masking off a bit or overspray on the primer makes no odds because ill be rubbing it down.
Way2fast... : Ya i bought it off a rally lad i deal with, they do some good work up in group4 alrite. Shame i didnt get the feckin tank i wanted!
Micko: Im gonna put it together myself, if ive any bother i can just ring Alan :D
Its getting bored and liners put and id go proper nuts if there was a problem so im not sure who to take it to......
A local fellow McCarthy engine's is the obvious choice, He does all Mick deans work i think and John Moynihan rallying sends all his work and customers work there. Its like the mapping story though ive heard a few bad stories..
Ah we'll see
way2fastforu
13-12-09, 19:26
ya they do some savage work alrite thats who i got my hydro wand off
that tank is savage. how many litres does it hold?
Your definatly making the right choice with the engine ;)
It is a 12 gallon tank which is loads so i could easily afford the back corners taken off.
I should be ordering all the engine bits next week!
coming along nicely frankie, she ll be some beast whn she finished, hav ye picked a colour for de outside or ye keepn it a secret till next year lol
Yeah have the colour for the outside picked but in case i change my mind i wont go saying it.... Its a dark nissan colour :)
mmm sounds good.... cant wait to see her,, id say she be getn 10 coats of clear lol
Mick : no not midnight purple its nicer than that, already had one midnight purple car.
Mark: Im puttin on 2 coats of that Dyna coat at the moment and its perfect, 80% on the first coat and 110% on the second :D
Frank lad, the car is coming along nicely. Havent drank in ages ha? that'll change friday night:D We'll feed ya drink. I might call over tommorw if yar working.
Nah im off it kid ;)
Ya ill be in the garage this evening alrite
pmc-drifter
16-12-09, 18:26
That is a nice build.
After talking to Colm there ive decided to run two pumps,
Still waiting for the swirl pot :mad: Hate being held up!
If anyone wants to sponsor me polycarbonate windows and frp doors your welcome :D
As said earlier proper job..
As said earlier proper job..
If its half the car yours is ill be happy lad :D Nice lock at the end of the year!!
Ive the car finally painted underneath so i can start fitting the suspension and steering over the holidays. Hope to have the car rolling by the 4th of Jan and off the spit!
Ill have pics of the shell as it is before fitting but for now a few pics of the Bn sports carf when i bought it
http://i741.photobucket.com/albums/xx58/frankae86/Image0005.jpg
http://i741.photobucket.com/albums/xx58/frankae86/Image0014.jpg
http://i741.photobucket.com/albums/xx58/frankae86/Image0006.jpg
And the epic wing, which is going to be..............altered for next year ;)
http://i741.photobucket.com/albums/xx58/frankae86/Image0008.jpg
Jay Rockett
25-12-09, 14:42
Great work there Frank, keep it up.. gona be a very nice car when its finished!
Unfortunatley the word recession isnt registering with me :(
SO................. i bought these off Mr.Moorehead
Modified front hubs
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0046-1.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0047-1.jpg
I have it next to my standard hub to see the difference in the knuckle
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0048.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0049-1.jpg
Also bought DW lower arms,
All parts sourced through driftireland :p
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0050.jpg
Car is upsidedown (wierd to write that word:confused:) so cant get great pics at the moment, underneath painted, inside and cage painted.
Fitting steering and suspension to get the car and rolling asap!
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0051-1.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0052-1.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0053-1.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0054-1.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0055-1.jpg[/IMG[IMG]http://i741.photobucket.com/albums/xx58/frankae86/DSCF0056-1.jpg]
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0059.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0056-1.jpg
The runs on the chassis and arches on the second last pic are zinc primer, i always go a little mad with it because it prevents rust after welding :D
looking good frank :cool:
is being able to flip the car around on the stand a big help? im debating weither to make up something to do the job or not.
Depends what plans ya have for under the car, like i had it that way 30% of the time say. I could rotate the car and stop it wherever i want, i think its dead handy.
My buddy that made the spit now has the rack and subframe that came on this car so he's modifying the subframe to bring the rack forward. Same as done by superclarkey on Driftworks
. It allows for more travel and with it this car should have the best lock possible in an Sbody or next to it anyway.
He's a welder by trade and if people are interested he might start making them on an exchange basis. I wont know till he makes this one if he's interested or not.
im planning on doing some seam welding and undersealing, i think the spit will have to be made.
it'll be good to see what sort of lock you can get now with the knuckles and steerings rack pulled forward
Robbie Daly Ps13
29-12-09, 17:33
Savage build your doing there lad its coming together nicely.........:p
What make stroker you building her with....... Wanna stroke my yoke could you pm me what ya paid for yours if ya don't mind........:cool:
Ya running a 20 or 25g tdo6 do ya think she'l be laggy........:rolleyes:
Its a 20G turbo, was already on the car. Great turbo on boost but ya i found it laggy, with the right clutch control its grand though :p
Was going to buy a BC stroker kit off a buddy of mine (he still has it) but was a small bit out of budget so im just boring it and using standard crank.
In bed here dying after a wedding so not much progress is gonna be made today :o
I hope this cage is easier to fall in over than the last one! I nearly broke my ankle getting into it in fermoy! Can't wait for my spin in it!
Yeah the cage is user friendly enough, in contact with TDP at the moment for "the works" head work, doing the block and then mapping it so im happy enough.
Robbie Daly Ps13
30-12-09, 14:57
Its a 20G turbo, was already on the car. Great turbo on boost but ya i found it laggy, with the right clutch control its grand though :p
Was going to buy a BC stroker kit off a buddy of mine (he still has it) but was a small bit out of budget so im just boring it and using standard crank.
In bed here dying after a wedding so not much progress is gonna be made today :o
What sort of money has yor man on the stroker kit.........:confused:
Did he plan on using it himself or summit........:rolleyes:
Ya its brand new he was going to use it but cant afford it now,
He has Crank and rods no pistons think he wants 1500 for it.
hey frank savage build ya got going on there buddy:D
Didnt cop who you were there for a minute Dave till i saw the two chicks in your profile pic :D
Ive a big waste of money going on is what i have :rolleyes:
Might get the car off the spit and rolling tomorrow, we will see how progress goes!
What a project Frank,Still following closely!
coming along nicely frank
Sorry for not updating with ages, didnt get a wholle pile done since new year with the feckin flu!
Took the wiring loom out and took out most of the wires i dont want from it.
Put the wiring loom into the car this evening, roughly because ill more than likley have changes to make. Add back the wires i cut and needed :rolleyes:
Because i made the gearbox tunnel bigger i had to modify the standard heater box and motor.
Going to make a center console then im sending the Dash off to be flocked....
Will update with pics the weekend if i get a chance.
flu... :rolleyes: excuses.
are you going to have to put in fire wall between you and the fuel tank? was just reading the regs there in a different post
I fuckin hope not :mad:
Dont think ive seen them in drift cars but i could be wrong :confused:
It wouldnt be the end of the world after......
Few pics of my dash, just put it into the car to see it.
Put away to keep dust away from it.
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0042-1.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0043-1.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0044.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0045-1.jpg
Mounted the handbrake lever where i want it and have the clyinder behind, going to make up a bar now.
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0048-1.jpg
All wiring is in the car but im waiting for a race battery to finish it,
Running gear is on but im wating for the subframe so i cant put wheels on it and drop her down!
Should be dropping the engine up to Robbie TDP very soon, cant wait to get that done.
Carbon on the cage
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0047-2.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0046-2.jpg
Anyone out of work that wants to come and help me finish it is very welcome ;)
Also i need some cool rims :(
Nice Build Man Love The dash:) Any Update???
that really looks the job in there Frank, i like the little carbon bits in it too
holt shit that flocking is class!! how much was it frank? it makes a savage job of the interior, very tasty indeed:)
savage build lad, love reading it good work
way2fastforu
24-01-10, 19:01
dash looks class frank who flocked it???wats ur hydro setup by the way????
The dash is damn cool. Fair play.
The dash is done by a local guy "shamrock rally spares" He does a lot of rally stuff. Cost 130euro for the dash and clocks surround.
I cut the dash and shaped a centre console in cardboard then gave it to my uncle who made it alumin and i wanted a centre that i could bolt off to get at wiring
Way2fast : The hydro that was in the car was bolted to the tunnel very weakly and way in the way of your knee and pointing at the wrong angle
So i sat in the car and marked exactly where i wanted itand made up a STRONG bracket.
The cylinder is back near the end of the tunnel and ill have a bar of some sort linking the lever to the cylinder. will take a bit of setting up but nothing major.
Im happy out with the job Dave did on the dash alright, id definatley reccomend him and he said people send him stuff by courier all the time.
Cooldrft on here made me a few fittings during the week that were missing out of the box when i bought s.hand DW lower arms :rolleyes:
So cheers james..
He's also making up fuel filters for me.
way2fastforu
24-01-10, 21:59
ah cool i thought it looked like it was gona be that kinda set up...i was thinkin of doin somethin similiar myself havin the lever up beside the wheel but the cylinder further back
Should be a good job lad, i hope to find out soon how it works :D
It was a cunt before mounted down low and the bracket moving before you even pull the handbrake!
And it was held with good old gutter bolts, ah you've gotta love the irish :p
way2fastforu
24-01-10, 22:07
haha cant beat the old gutter bolts:Das long as u use a good solid bar between the lever an the cylinder should work very good!!im gona weld 3mm plate onto the tunnel to support mine should be good an strong wit no flex then:D jus have to decide to stick wit my current set up or somethin similiar to yours
Robbie Daly Ps13
25-01-10, 19:49
Savage savage savage:D
you will need a fire wall frank i was waiting to see what you were going to for it as i need to do it myself car is looking good keep it up.i hope aswell the engine will rev all the way to the red line on that clock ;-)
you will need a fire wall frank i was waiting to see what you were going to for it as i need to do it myself car is looking good keep it up.i hope aswell the engine will rev all the way to the red line on that clock ;-)
Yeah i found out after i need a firewall, i was talkin to Alan sinnott about it
The handiest thing to do is "box off" the Whole fuel system.
It will be one of the last jobs ill be doing.
Wont be reving my engine that high lad :p
Speaking of Alan id like to thank him, Colm and Gem for the great advice ive been getting throughout the build :)
Also Bart and Yowdy at Just Jap for most of the parts going into the car at good prices, keep up the good work boys ;)
Frank,where you get the carbon for over the door bars?
Yeah i found out after i need a firewall, i was talkin to Alan sinnott about it
The handiest thing to do is "box off" the Whole fuel system.
It will be one of the last jobs ill be doing.
Wont be reving my engine that high lad :p
Speaking of Alan id like to thank him, Colm and Gem for the great advice ive been getting throughout the build :)
Also Bart and Yowdy at Just Jap for most of the parts going into the car at good prices, keep up the good work boys ;)
no hassle at all lad..
sooner the better this car is finished..
ur starting to cost us money at this stage:p:p
keep up the good work..
dash turned out fair well;)
Frank,where you get the carbon for over the door bars?
Buddy of mine gave me some, Its 3M carbon tape. savage stuff.
Big box of goodies arrived today
CP forged pistons 90mm
Brian crower forged rods
Cometic steel head gasket
Darton sleeves.
Waiting on an oil pump then it will be off up to TDP for machine work.
sounds like shes comin on well man,fair play,it will be savage when its done
Cheers buddy, Should be cool when finshed alright.
Finished the h.brake this evening, must get braided lines for it now.
Have straps made to secure the tank and got 1mm alumin to make the firewall
Will have pics again this weekend if i think there is enough progress made :p
Dreamworks-silvia
27-01-10, 23:00
nice one frank id say it was like x mass al over again when them bits arrived.
regarding that fire wall i was under the impression that u could just sheet off the area where the upright part of the back seat is attached or have the rules changed??
Ya you could do that but it would be bulky and ugly lookin id say lad, I was eyeing it up.
Wait till ya see how i do it, should look alright.
This is going to be some yoke frank, Are u around some evening to have a look? :)
This is going to be some yoke frank, Are u around some evening to have a look? :)
Im around most evenings lad, gimmie a text during the day and ya can call away
My oil pump arrived today so ill be talking the engine to TDP the weekend all going well
Race battery and few other bits also arrived so i can be fitting away.
Painted The door jams this evening, will be painting the outside panels soon.
Gonna paint the bonnet in the colour im thinking to see how it looks
Im around most evenings lad, gimmie a text during the day and ya can call away
My oil pump arrived today so ill be talking the engine to TDP the weekend all going well
Race battery and few other bits also arrived so i can be fitting away.
Painted The door jams this evening, will be painting the outside panels soon.
Gonna paint the bonnet in the colour im thinking to see how it looks
you may call in for tea if your up this way
Aye i may do that Gem if ive time, get a look at your setup :)
Put in fire extinguisher, boot locking pins and mounting the battery box this evening.
Only after coming across this build now!! Fair play to ya lad, going to be sum machine by the time shes finished. Best of look with her!!!;)
Who did you get to do your flocking man? Looks mint!! Did u build the gauge panel yourself? I wanna start on mine soon
jamie180sx
04-02-10, 12:56
Buddy of mine gave me some, Its 3M carbon tape. savage stuff.
Big box of goodies arrived today
CP forged pistons 90mm
Brian crower forged rods
Cometic steel head gasket
Darton sleeves.
Waiting on an oil pump then it will be off up to TDP for machine work.
sr22,tis some job that,my short block is similar to that except im using a s15 crank for strenght and a GTI-R oilpump conversion for higher oil pressure,the short stroke engine works extremely well,what head work you doing cams ect,
best of luck with it
sr22,tis some job that,my short block is similar to that except im using a s15 crank for strenght and a GTI-R oilpump conversion for higher oil pressure,the short stroke engine works extremely well,what head work you doing cams ect,
best of luck with it
I wanted to build a stroked 2.2 but the BC crank and rods fell through.
I got talking to a lad that has a short stroke 2.2 and i decided to go that route.
Im using the standard crank with ACL's and i have a new oem oil pump, I dont know about the gti-r oil pump upgrade?
When i saw TDP's thread about their machine work i knew there was only one place to get the block built! I got talking to Robbie and he wants redtop cams and is going to do some custom headwork. So ill let him use his magic.
Who did you get to do your flocking man? Looks mint!! Did u build the gauge panel yourself? I wanna start on mine soon
I went to a local guy i will pm you his number if you want, he did a great job.
He's in Killarney.
you can get a gtir oil pump rotor and swap it with one in your new oil pump, i think apex in england do em
Phones fucked again pm on the way
Get yourself a nokia :p
Whats the difference in the rotars?
I went to a local guy i will pm you his number if you want, he did a great job.
He's in Killarney.
pm me hes number dude..thinking on doing my dash if i get a chance to take it out..
cars coming on well will be cool when finished..when da plan on having it ready
Dave Fleming is his name, goes under Shamrock Rally Spares.
087 6230284.
Plan is to have it ready as soon as possible Christy :p
Im waiting for FRP doors off you ;)
This gonna b sweet when finished, keep up the good work
Was up with Robbie TDP today, he said my engine should be ready next saturday and seems to think it should be a good job.
way2fastforu
06-02-10, 23:10
cool stuff man!!
I firstly wanted to paint this car black but there's enough black cars out there so i said id go a very dark purple..... had a colour picked out and last minute i saw a mk1 escort painted a blue/purple.
So i said id get a bit mixed and painted the bootlid friday
So far everyone thats seen it likes it so i might go ahead and paint her this colour.
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0042-2.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0043-2.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0044-1.jpg
Thats gun finish, few specs of dust not tipped down yet
I got the winscreen and quarter windows in and battery mounted
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0045-2.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0046-3.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0047-3.jpg
I had a run in with the tyre wall in mondello so had to straighten the p/s door abd primed them both today, HOPE to paint the inside of the doors, boot and bonnet yellow tomorrow evening.
Is it dusty or is there a metel flake through it franky??
Just some filler dust id say lad, i was sanding my door at the time :rolleyes:
Not easy take pics of paintwork inside a garage in the evening time so i wasnt too pushed.
Ill be sure and take a heap when its finished :)
Looks a good colour, not the usual run of the mill, add sum flake to it :D:D
Nah wouldnt be my kind of thing lad.
Nah wouldnt be my kind of thing lad.
Looks a gud choice of colour either way man :cool:
It looks a lot better in the flesh :cool:
The bottom left in 1st pic is probably closes to the actual colour.
It looks a lot better in the flesh :cool:
The bottom left in 1st pic is probably closes to the actual colour.
Yeah james is right, im the worst at taking pics!
Cheers by the way.
Will have a few pics uploaded tomorrow
Have the car off the spit and rolling which is good :)
Painted inside of doors, bonnet etc...
Fitted the BN Blister rear arches (bonded on)
Painted arches and doors this evening.
Collected my engine from Robbie TDP last saturday, pics of the work can be seen on his traders section.
Im getting ARP main bolts off Colm during the week so should be building the engine saturday all going well...
Happy enough with progress the past week, pics tomorrow guys!
Lad the build looks savage!!.....no recession on round here!:p is the car going to be finished in yellow or is that a base for the candy??
Dunnedriftin
06-03-10, 22:30
Any jobs going in your place? :D
Fair play ted, going to be a savage car!!
Fitted a Lexan rear screen
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0055-2.jpg
My buddy modified the front subframe, fitted it and took the car off the spit
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0049-2.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0050-1.jpg
Painted the inside of the doors and stuff..
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0070-1.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0069-1.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0068-1.jpg
Painted the doors and quarter panels yesterday here are the pics
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0053-2.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0054-2.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0056-2.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0057-1.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0058-2.jpg
Went a bit mad with the camera today so here's some more :p
These are the doors, put them out in the sun today for another bit of a baking :)
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0059-1.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0060-1.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0061.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0062.jpg
way2fastforu
07-03-10, 19:53
lookin good dude!!
Hanging the doors
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0063-1.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0064-1.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0065.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0066.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0067.jpg
Then fitted the windows and mirrors
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0071-1.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0072-1.jpg
Few engine bits i have
Arp bolts, Head and TDP cam pulley
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0073-1.jpg
Block and crankshaft
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0074-1.jpg
90mm CP pistons
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0075-1.jpg
Brian Crower forged rods and MHG
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0077-1.jpg
Sweet man, colour is lovely.................Will u be ready in time??
Sweet man, colour is lovely.................Will u be ready in time??
I dunno lad, im being told that i wont be but sure all i can do is try, Started the car on the 1st of Nov which wasnt smart as it was a full build from scratch and i can only working nights and a bit of the weekend at it :(
Front now till Saturday ill be doing brakes/steering + suspension
Saturday il be putting the engine together.
Say a few prayers for me will be no harm :D
The quality of work is a credit to you frank.
That blue looks savage in the sun light :cool:
ha ha cheers James, finally figured out photo's turn out better when not inside a dark garage ;)
I dunno lad, im being told that i wont be but sure all i can do is try, Started the car on the 1st of Nov which wasnt smart as it was a full build from scratch and i can only working nights and a bit of the weekend at it :(
Front now till Saturday ill be doing brakes/steering + suspension
Saturday il be putting the engine together.
Say a few prayers for me will be no harm :D
No bothers, if you need help im sure a few up us can lend a hand!!
lookin good frank, lovely finish on the shell ,all the late nights paying off 4ye, plenty of laquer on her she be hard marked lol, wht colour u doin roof?
Cheers Chuck ill see how i go, id be the kinnda fella if someone came to give a hand he'd end up just talkin to me ;)
Mark : Yeah i couldnt put on another drop of lacquer, im painting the centre of the roof silver along with the vents in the blister bonnet and the wing of the spoiler and the panle between the rear lights, just to break the blue. The pillars will be blue beside the roof.
more hardship for ye lol ,would ye not just do whole roof silver it would look class either, something wid a kinda flippy gold in the silver like on renaults,code eludes me cant think?
comin along nicely, keep it up
Yeah it would be handier paint it all silver but i like be to awkward!
Lookin savage fella! fair play
stack-180sx
08-03-10, 00:26
some build lad hope you will be ready in time, also dose your man still have that stroker kit ?? would be interested in that if the moneys right ??:D
Bodywork is finished just to paint the bonnet, ill do that when the engine is in.
Built the engine yesterday and today.
Should be putting it in tomorrow night.
will update with pics the weekend.
Buddy is coming doing a bit of wiring on it also the weekend.
good stuff, coming along nicely frank.....;)
Cheers Niall, at this stage all i thought id have left to do
is give it a rub of polish :rolleyes:
way2fastforu
25-03-10, 22:42
good work man wen ya hopin to start the engine up??
Engine is being started up at TDP's, not sure yet when ill get up there.
When the engine and anchilaries (spell) are in and Wes wires it.
Ive to fit an BR25 box
do the fuel lines
Make firewall.....
Few other small jobs maybe
way2fastforu
25-03-10, 22:49
ah rite ya havent got many jobs left to do so
Even the small jobs seem to be taking ages though!
I also fitted braided brake lines for the handbrake.
way2fastforu
25-03-10, 22:57
haha the small jobs always do for some reason
danmoorhead
25-03-10, 23:03
looks gud frank!!!;)
Cheers Dano, Should be good when its done
Dropped in the engine today and started bolting...
Few pics
Pistons in
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0079.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0080-1.jpg
Arp main studs and s14 pickup pipe
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0084-1.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0085-1.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0086-1.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0087-1.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0089.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0090.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0091.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0092.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0095.jpg
My silver roof, didnt bother painting the pillars blue. If i get time i might paint them black ill see.
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0094.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0093.jpg
looking good Frank... when ya hoping to have it done??
looking good Frank... when ya hoping to have it done??
I am waiting for a few bits for the RB25 box conv and that was putting a dampner on my mood, but i was talking to Alan Sinnott there and i might just put up the SR box for mapping and round1.
Ill possibly be able to answer your question next weekend lad!
Robbie Daly Ps13
28-03-10, 16:13
Cars like theses are done when there done............... Its impossible to put a date on them.......
Coming along well lad great build......... Some work and effort put into it...................!
On a MAJOR high my engine started this evening!!
For a change something happened without problem :rolleyes:
Started lovley with good oil pressure and nice and quiet.
Run in next and im booked in for mapping Wednesday...
Woooooooooohooooooooooooo, job frank, i may see u on the line
Hopefully dude, not finished yet but its certainly getting there :)
The only thing annoying me now is running the SR box, ill have to be gentle
That's great news ,what are you missing to get the rb25 box fitted ?
Hopefully dude, not finished yet but its certainly getting there :)
The only thing annoying me now is running the SR box, ill have to be gentle
don't be gentle just break it haha, shes looking mint
Thanks for the comments guys, come over for a look and to say hello at Fermoy!
Slave cylinder (the Gosson has one)
Adaptor plate for bellhousing and prop
Some tidy build lad... :cool:
Paint looks fookin mint which is noice :D
Thanks for the comments guys, come over for a look and to say hello at Fermoy!
Slave cylinder (the Gosson has one)
Adaptor plate for bellhousing and prop
Adaptor plate:
http://www.driftireland.com/showthread.php?t=6307&highlight=gearbox
http://www.driftireland.com/showthread.php?t=2122&highlight=gearbox
Cheers James but im comitted to buying another one, ah ill see what happens
drift student
10-04-10, 09:39
so far so good frank.
Ha ha thats it lad...
The final hurdle can somtimes be the hardest :p
Got the car logged this evening at Barry's motorsport
Going running in the engine as much as i can tomorrow before mapping wednesday morning.
I know i promised pics ive just been busy....
Robbie Daly Ps13
12-04-10, 22:40
Got the car logged this evening at Barry's motorsport
Going running in the engine as much as i can tomorrow before mapping wednesday morning.
I know i promised pics ive just been busy....
What way you gonna run it in................!
On the road, monitoring the fueling and checking for leaks. etc
Im gonna drive it as normal really up and down the revs witout going mad.
Some say run it in easy others say hard straight on the dyno!
Robbie Daly Ps13
12-04-10, 22:54
On the road, monitoring the fueling and checking for leaks. etc
Im gonna drive it as normal really up and down the revs witout going mad.
Some say run it in easy others say hard straight on the dyno!
Its an ongoing discussion...... Some even say if built right it don't need to be ran in at all...........! Im sure robbie will give it a bit of a run on the dyno aswell............!
Ya ill tell him what i did and he can go from there.
Fingers crossed it all goes well (sweating buckets) ;)
Robbie Daly Ps13
12-04-10, 22:58
Well best of luck anyway ya deserve it after all the hard work gone in......... Hope to see ya in formoy sat all going well......!
Housemates came home with good reports man, cars meant to be sick!! Looking forward to seeing it in the sun n maybe sharing some Hb ice-cream :)
Car is a credit to ya frank,mint in every way!! ;)
Cheers lads :)
So yesterday evening my buddy Wes thats wiring it for me came to finish it off and run the engine in, by the time we got going we only had half an hour before dark so we did as much driving as we could.
At around 12 the car starting running bad and we noticed it wasnt charging so off down to a crashed 180 to whip the alternator off it, by the time i had it fitted and the car on the trailer etc it was gone 1 o clock,
When i had my stuff together and in bed it was 2 and i had the alarm set for 5
So after in around 3 hours sleep i set off for wicklow, just after mallow i got a flat in the trailer and i was a c*nt to change because the lad before me had the threads damaged on 3 of the 4 studs :(
so did you make wicklow ted??????????
Was a small bit late arriving at TDP but they didnt mind :)
The lads were in good form today and we got the 180 on the dynapack swiftly enough...
I told Robbie how much and what way i drove the car so i let him do his thing on the dyno. To say i was nervous when the car was being mapped is an understatment, ive the front of my trousers worn away from wiping my sweaty hands on them throughout :D
Robbie says whats wrong and i said " oh i just hope it doesnt blow up"
And he casually says "well if its built right it wont"......
I was like ahhhhhh :eek:
Halfway through he seemed happy and said things were going well, it was making going power and stuff.
He mapped in on 2 settings
At just under 1.2bar boost it made 403.7flyHP 396.4lbft
At just under 1.5bar boost it made 465.6flyHP 477.2lbft
WheelHP is 351 and 404.
We were both happy with the figures and Robbie said he could have possibly gone a bit further but didnt want to be brushing up bits of SR box for a week!
He said its a brilliant setup for drifting, very responsive.
The bad news is im still waiting on modified steering arms i need to be able to set the car up and Robbie reckons the gearbox wont last 1 upshift to third gear :(
Im uploading pics at the min but i could fall asleep before the finish
fair play to you nice figure and lovely matching torque throw up the dyno print outs don't forget to change your sig
it makes it all worth while now doesn't it
Ya i took a few photo's of the dyno printouts but the are crap enough
I cant seem to take a good pic with the camera!
If people want to see the graphs i can try and take the better outside during the day or something but i only have the figures in case people think in adding to them.
It will be worth it when m out there breaking bits of the car etc :p
The only thing being minded will be the engine and maybe the box :)
way2fastforu
14-04-10, 21:30
savage figures there frank...id say your delighted
The only thing being minded will be the engine and maybe the box :)
always mind the box lad;)
great figures...
fair play
I hardley get near it these days lad so its safe enough, well it should be :rolleyes:
Yeah im happy with the figures alright but they are just figures after,
Ill notice the difference when i get in and actually drive it properly.
Id say its building boost earlier and much better than before, robbie reckons the headwork was a good job...
Like i said Robbie said i could make massive figures with more aggressive cams and few other small bits but the power will not be as "useable" as this setup
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0143.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0144.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0149.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0148.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0150.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0151.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0152.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0153.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0154.jpg
Where the magic happens :)
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0156.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0157.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0158.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0160.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0162.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0163.jpg
http://i741.photobucket.com/albums/xx58/frankae86/DSCF0166.jpg
fair play frankie,she looks well and thats bice power too
drift student
15-04-10, 15:05
savage power frank!
fair play to you (and wes).
Administrator
15-04-10, 15:19
Looking very good Frank fair play. Nice figures too. Looking forward to seeing this out
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.