turbo lines

[Boguey001]

just a quick question does it matter what way the Water lines go to the turbo and if it does them what way should they run? Cheers.

[Boguey001]

also meant to say that its a t28 on a vvt blacktop.

[si_berry]

What do you mean man? Line from block to turbo.. job done! :)

[Boguey001]

Can no one help? :( Also need to know the length of an a/m tension arm for a 180 when its fully closed up.

[Boguey001]

What do you mean man? Line from block to turbo.. job done! :)

I mean on the blacktop vvt the coolant for the turbo flows from under the pipe from the radiator to the turbo and the return line flows from the turbo back to the block, my question is does it matter which way the coolant flows through the turbo, ie does it matter which side of the turbo the flow line is bolted to and which side of the turbo the return line is bolted to or does it make any difference?

[mr.jailbait]

but they'll only go on one way really....if you rotate the chra so the oil drain is pointing down,then the front line goes forward and the rear backwards

[Boguey001]

but they'll only go on one way really....if you rotate the chra so the oil drain is pointing down,then the front line goes forward and the rear backwards

Actually ive braided lines on mine and they are both the same length hence my reason for asking.

[mr.jailbait]

if the connections are the same on both pipies aswell as length then it doesnt matter

[Boguey001]

thats what i needed to know, cheers lad.