gt2871r spool start

[paddy330cd]

Does anyone have one of these, what rev does it start to spool/boost for yous?

[mr.jailbait]

engine would be a help?

for an sr 3200-3500ish depending on other factors

[ken red 180]

with a .86 housing your looking at 3500 to 3600 with injectors z32 the usual bits
with a .64 housing it should start to spool around 1900 to 2300 revs
i had that set up on my sr with 550 inject... and z32 and it use to spool at what felt to be 1900 rpm as it was instant and with full boost in at 3800rpm
hope this shines some light on the subject for ya

[mr.jailbait]

sorry, meant to say that was full boost

cant remember when they start spooling

injectors and afm arent connected to how fast a turbo spools

[barry180]

think mine spools around 2000rpm im nearly sure wat boost ya running

[paddy330cd]

with a .86 housing your looking at 3500 to 3600 with injectors z32 the usual bits
with a .64 housing it should start to spool around 1900 to 2300 revs
i had that set up on my sr with 550 inject... and z32 and it use to spool at what felt to be 1900 rpm as it was instant and with full boost in at 3800rpm
hope this shines some light on the subject for ya

Sr20 with all the bits to get it to 400hp, it was just mapped for nct on 95ron etc, was mapped low over emissions n shit... Just wondering now what I can look forward to with the remap, it has a garrett gt25 housing if that makes sense to you, 1.0 low boost, 1.5 high boost