my fd3s project so far

[Denis04]

i bought this car running 344bhp last january since then i have been running in the new rotor housings.,

Here's a pic of the car when i first bought it...
http://photos-a.ak.fbcdn.net/hphotos-ak-snc7/388415_295347970508507_100000999202548_825004_1613 502628_a.jpg

First things first i had a few basic things to do so i....

- NCT'd the car
- polly bushed the entire car
- new brakes
- braided lines
- changed lights back to standard
- new 99 spec rear lights
- new speakers
- turbo timer
- sparco snap off steering wheel
- removed 99 spec spoiler

After doing all of this here is how it looked at japfest..
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/296949_2051803137080_1304553715_31774654_793611133 _n.jpg
http://photos-e.ak.fbcdn.net/hphotos-ak-ash4/315079_155343954552709_100002313173916_294853_1316 988061_a.jpg

Power: The car was running 344bhp but i wanted a bit more so i had the rx7 over with pip in wgt while here i got water methanol installed ,a new boost controller,a fuel pressure regulator,new spark plugs,new plug leads,new exhaust ,new sports cat and mapped it on E5 ron petrol! (had to carry over drums haha) and achieved 441 bhp :D.


http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/388608_295341183842519_100000999202548_825000_1537 436660_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/387591_295339683842669_100000999202548_824999_7846 78317_n.jpg

Brakes: I have purchased brembo 6 pots for the front and 4 pots for the back off a crashed german beast :D.



Body work...

What i have purchased...

- RE-amemiya AD9 carbon bonnet
- RE- ameniya Front bumper
- RE- ameniya CARBON rear de-fuser
- RE- ameniya wing mirrors
- Shine auto front wings
- shine auto carbon skirts
- Shine auto carbon lip spoiler

Interior:

-bride seats
-bride rails
-takata harnesses


Wheels and tyres:

I have currently 17inch RE-ameniya wheels which i am open to offers on!


http://photos-b.ak.fbcdn.net/hphotos-ak-ash4/399411_295317280511576_100000999202548_824908_1969 64960_a.jpg

My new wheels are work meister s1 3 pce wheels fronts are 18 x 10 + 22 Rears 18x10.5-3

http://photos-a.ak.fbcdn.net/hphotos-ak-ash4/253772_229026027123205_185770994782042_969096_7242 828_a.jpg

http://photos-h.ak.fbcdn.net/hphotos-ak-snc6/206694_215956168430191_185770994782042_864177_1400 614_a.jpg
also have feed engine dampener to install

[skinnynphats200]

Sounds nice dude. Nice to see a few more of these popping up. Your pics dont work though

[Leebo]

Looks great man, fair play!!

[180sxbreaker]

sum pics very small...looks nice tho

[Dizz]

My old RX7 :D

Jesus you've been busy lad! Hows it going for you? I'd say that last remap turned it into an animal :D

[Denis04]

Never had one but of other bother with it since I got if off u dizz really happy with it ,the final map I got done on it makes it light up the tyres in 4th gear with ease does some job on the rear tyres can wait to get this project finished

[Denis04]

First day out in the rx7 in Mondello since the re map was very impressed with the car need to make a few improvements though,brembos , new wheels,fitted and better rubber under me who would ya recommend for making mounting brakets for the q7 brakes and for suspension set up

[Kruizer]

Robbie could machine up the brackets for you lad...

[philiphowe]

is she twin turbo or single?
old tarmac rally tyres are a great job on the front and cheap too,

[Denis04]

the car is running a t78 turbo with a street ported engine,
http://i37.tinypic.com/15g2h49.jpg

[batman026]

best of luck with it, always wanted a rex myself

[Denis04]

Removed the clutch their Tis fucked going for a twin plate now,bodywork is due to be starting next week too