View Full Version : ca18 to sr20 problem
johnjoeae86
06-12-11, 22:49
right lads need a bit of help wrote off my 180sx bought a clean ca18 shell dropped in my engine and all the rest.....cars swinging but not starting its getting fuel its getting spark all that if anyone has any ideas id appriciate it starting to wreck my head at this stage cheers
did you just plug in the 180 engine loom to the 200sx body loom behind the passo head light?
johnjoeae86
06-12-11, 23:02
did you just plug in the 180 engine loom to the 200sx body loom behind the passo head light?
yeah i had a thread up here before asking did i need to change interior loom and a few lads said no but my mate said strip everything so i dont really know
when the transplant was done on my 180 from N/A to turbo i had to change all the looms in the car its a cunt id say u will have to do the same
johnjoeae86
06-12-11, 23:11
when the transplant was done on my 180 from N/A to turbo i had to change all the looms in the car its a cunt id say u will have to do the same
thats what my mate reckoned to do thats going to be a cunt the cars fully together now
you wont need to change the full loom,but you have to no what you are doing there are a few wires to be changed
I had to take the f8 and f10 plugs from the ca18 loom and wire them up to my ecu when i put the s14 engine in just run the wires up and splice them in mite be different in the non vvt 180sx sr20.
johnjoeae86
06-12-11, 23:17
[QUOTE=gem-s13;325673]you wont need to change the full loom,but you have to no what you are doing there are a few wires to be changed[/QUOTE
dont suppose ya want to enlighten me please?:)
read through this! tells u what to do with the wiring behind passenger lamp!
http://media.sxoc.com/contributors/s13faq/S13SR20Guide08.pdf
johnjoeae86
06-12-11, 23:29
sound man!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.