Valve problem

[silverbullitt]

I have Rays Nismo wheels on the 180sx , and one wheel is constantly going flat on me .
I have found the problem to be the valve .
Trouble is its one the below type of valve , and my local tyre lad hasnt a clue where to find a replacement.
http://www.wheel-weight.com/photo/big_35aebc587c950e738e7c743e185fe8e3/Screw-on-Large-Bore-Tube-Valve-for-OTR-Tire.jpg
I tried to seal it with epoxy , but it still leaked through , im tempted to use liquid metal but i'll hold off on that until i run out of options.

SO any ideas where i might be able to get a replacement valve for the wheel

[paulr5]

Try dirko rtv silicone, it's thicker than normal silicone and more flexible than epoxy, had the same problem before with them valves, I drilled the hole bigger smoothed the edge and fit normal valves. try jeep alloys or truck wheels they have them valves.

[NIALL JZX]

ya can get rays ones on ebay lad !!!!

[silverbullitt]

Cheers lads ,
I reckon , this might do the trick ...

http://www.ebay.com/itm/90-DEGREE-CHROME-METAL-VALVE-STEMS-2-80-LONG-SET-4-/140618601390?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item20bd8593ae#ht_592wt_740